Message ID | 1365679443-25456-2-git-send-email-hechtb+renesas@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Apr 11, 2013 at 01:23:58PM +0200, Bastian Hecht wrote: > We add the capabilty to probe SH CMT timer devices using Device Tree > setup. > > Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> As per my recent email regarding "ARM: shmobile: sh73a0: Add timer DT names to clock list", I have dropped this patch which was previously queued-up for v3.11. > --- > v4: > Moved the assignments of p->channel_offset and p->timer_bit so that > they are ready as soon as setup_irq() is called > > drivers/clocksource/sh_cmt.c | 108 +++++++++++++++++++++++++++++++++++++----- > 1 file changed, 95 insertions(+), 13 deletions(-) > > diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c > index 08d0c41..66a12e9 100644 > --- a/drivers/clocksource/sh_cmt.c > +++ b/drivers/clocksource/sh_cmt.c > @@ -34,10 +34,13 @@ > #include <linux/module.h> > #include <linux/pm_domain.h> > #include <linux/pm_runtime.h> > +#include <linux/of.h> > > struct sh_cmt_priv { > void __iomem *mapbase; > struct clk *clk; > + long channel_offset; > + int timer_bit; > unsigned long width; /* 16 or 32 bit version of hardware block */ > unsigned long overflow_bit; > unsigned long clear_bits; > @@ -109,9 +112,7 @@ static void sh_cmt_write32(void __iomem *base, unsigned long offs, > > static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p) > { > - struct sh_timer_config *cfg = p->pdev->dev.platform_data; > - > - return p->read_control(p->mapbase - cfg->channel_offset, 0); > + return p->read_control(p->mapbase - p->channel_offset, 0); > } > > static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p) > @@ -127,9 +128,7 @@ static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p) > static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p, > unsigned long value) > { > - struct sh_timer_config *cfg = p->pdev->dev.platform_data; > - > - p->write_control(p->mapbase - cfg->channel_offset, 0, value); > + p->write_control(p->mapbase - p->channel_offset, 0, value); > } > > static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p, > @@ -176,7 +175,6 @@ static DEFINE_RAW_SPINLOCK(sh_cmt_lock); > > static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) > { > - struct sh_timer_config *cfg = p->pdev->dev.platform_data; > unsigned long flags, value; > > /* start stop register shared by multiple timer channels */ > @@ -184,9 +182,9 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) > value = sh_cmt_read_cmstr(p); > > if (start) > - value |= 1 << cfg->timer_bit; > + value |= 1 << p->timer_bit; > else > - value &= ~(1 << cfg->timer_bit); > + value &= ~(1 << p->timer_bit); > > sh_cmt_write_cmstr(p, value); > raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); > @@ -673,15 +671,93 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name, > return 0; > } > > -static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) > +static const struct of_device_id of_sh_cmt_match[] = { > + { .compatible = "renesas,cmt-timer" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, of_sh_cmt_match); > + > +static const int sh_cmt_offset_multiplier[] = { 0x60, 0x10, 0x40, 0x40, 0x40 }; > +#define CMT_MAX_CHANNELS 6 > + > +static struct sh_timer_config *sh_cmt_parse_dt(struct device *dev) > +{ > + struct sh_timer_config *cfg; > + struct device_node *np = dev->of_node; > + u32 timer_id, channel_id, rating; > + > + if (!IS_ENABLED(CONFIG_OF) || !np) > + return NULL; > + > + cfg = devm_kzalloc(dev, sizeof(struct sh_timer_config), GFP_KERNEL); > + if (!cfg) { > + dev_err(dev, "failed to allocate DT config data\n"); > + return NULL; > + } > + > + if (of_property_read_u32(np, "renesas,device-id", &timer_id)) { > + dev_err(dev, "device id missing\n"); > + return NULL; > + } > + if (timer_id >= ARRAY_SIZE(sh_cmt_offset_multiplier)) { > + dev_err(dev, "invalid device id\n"); > + return NULL; > + } > + > + if (of_property_read_u32(np, "renesas,channel-id", &channel_id)) { > + dev_err(dev, "channel id missing\n"); > + return NULL; > + } > + if (channel_id >= CMT_MAX_CHANNELS) { > + dev_err(dev, "invalid channel id\n"); > + return NULL; > + } > + > + cfg->channel_offset = sh_cmt_offset_multiplier[timer_id] * > + (channel_id + 1); > + cfg->timer_bit = channel_id; > + > + /* > + * We convert the {source,event}-quality DT properties to linux specific > + * clock{source,event}_ratings. > + */ > + if (!of_property_read_u32(np, "renesas,source-quality", &rating)) { > + if (rating > 10) { > + dev_err(dev, "invalid source-quality\n"); > + return NULL; > + } > + if (rating) > + cfg->clocksource_rating = rating * 50 - 1; > + } > + > + if (!of_property_read_u32(np, "renesas,event-quality", &rating)) { > + if (rating > 10) { > + dev_err(dev, "invalid event-quality\n"); > + return NULL; > + } > + if (rating) > + cfg->clockevent_rating = rating * 50 - 1; > + } > + > + if (!cfg->clocksource_rating && !cfg->clockevent_rating) { > + dev_err(dev, "source- and event-quality 0, timer is unused\n"); > + return NULL; > + } > + > + return cfg; > +} > + > +static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev, > + struct sh_timer_config *cfg) > { > - struct sh_timer_config *cfg = pdev->dev.platform_data; > struct resource *res; > int irq, ret; > ret = -ENXIO; > > memset(p, 0, sizeof(*p)); > p->pdev = pdev; > + p->channel_offset = cfg->channel_offset; > + p->timer_bit = cfg->timer_bit; > > if (!cfg) { > dev_err(&p->pdev->dev, "missing platform data\n"); > @@ -777,7 +853,7 @@ err0: > static int sh_cmt_probe(struct platform_device *pdev) > { > struct sh_cmt_priv *p = platform_get_drvdata(pdev); > - struct sh_timer_config *cfg = pdev->dev.platform_data; > + struct sh_timer_config *cfg; > int ret; > > if (!is_early_platform_device(pdev)) { > @@ -785,6 +861,11 @@ static int sh_cmt_probe(struct platform_device *pdev) > pm_runtime_enable(&pdev->dev); > } > > + if (pdev->dev.of_node) > + cfg = sh_cmt_parse_dt(&pdev->dev); > + else > + cfg = pdev->dev.platform_data; > + > if (p) { > dev_info(&pdev->dev, "kept as earlytimer\n"); > goto out; > @@ -796,7 +877,7 @@ static int sh_cmt_probe(struct platform_device *pdev) > return -ENOMEM; > } > > - ret = sh_cmt_setup(p, pdev); > + ret = sh_cmt_setup(p, pdev, cfg); > if (ret) { > kfree(p); > pm_runtime_idle(&pdev->dev); > @@ -824,6 +905,7 @@ static struct platform_driver sh_cmt_device_driver = { > .remove = sh_cmt_remove, > .driver = { > .name = "sh_cmt", > + .of_match_table = of_match_ptr(of_sh_cmt_match), > } > }; > > -- > 1.7.9.5 >
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 08d0c41..66a12e9 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -34,10 +34,13 @@ #include <linux/module.h> #include <linux/pm_domain.h> #include <linux/pm_runtime.h> +#include <linux/of.h> struct sh_cmt_priv { void __iomem *mapbase; struct clk *clk; + long channel_offset; + int timer_bit; unsigned long width; /* 16 or 32 bit version of hardware block */ unsigned long overflow_bit; unsigned long clear_bits; @@ -109,9 +112,7 @@ static void sh_cmt_write32(void __iomem *base, unsigned long offs, static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p) { - struct sh_timer_config *cfg = p->pdev->dev.platform_data; - - return p->read_control(p->mapbase - cfg->channel_offset, 0); + return p->read_control(p->mapbase - p->channel_offset, 0); } static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p) @@ -127,9 +128,7 @@ static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p) static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p, unsigned long value) { - struct sh_timer_config *cfg = p->pdev->dev.platform_data; - - p->write_control(p->mapbase - cfg->channel_offset, 0, value); + p->write_control(p->mapbase - p->channel_offset, 0, value); } static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p, @@ -176,7 +175,6 @@ static DEFINE_RAW_SPINLOCK(sh_cmt_lock); static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) { - struct sh_timer_config *cfg = p->pdev->dev.platform_data; unsigned long flags, value; /* start stop register shared by multiple timer channels */ @@ -184,9 +182,9 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) value = sh_cmt_read_cmstr(p); if (start) - value |= 1 << cfg->timer_bit; + value |= 1 << p->timer_bit; else - value &= ~(1 << cfg->timer_bit); + value &= ~(1 << p->timer_bit); sh_cmt_write_cmstr(p, value); raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); @@ -673,15 +671,93 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name, return 0; } -static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) +static const struct of_device_id of_sh_cmt_match[] = { + { .compatible = "renesas,cmt-timer" }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_sh_cmt_match); + +static const int sh_cmt_offset_multiplier[] = { 0x60, 0x10, 0x40, 0x40, 0x40 }; +#define CMT_MAX_CHANNELS 6 + +static struct sh_timer_config *sh_cmt_parse_dt(struct device *dev) +{ + struct sh_timer_config *cfg; + struct device_node *np = dev->of_node; + u32 timer_id, channel_id, rating; + + if (!IS_ENABLED(CONFIG_OF) || !np) + return NULL; + + cfg = devm_kzalloc(dev, sizeof(struct sh_timer_config), GFP_KERNEL); + if (!cfg) { + dev_err(dev, "failed to allocate DT config data\n"); + return NULL; + } + + if (of_property_read_u32(np, "renesas,device-id", &timer_id)) { + dev_err(dev, "device id missing\n"); + return NULL; + } + if (timer_id >= ARRAY_SIZE(sh_cmt_offset_multiplier)) { + dev_err(dev, "invalid device id\n"); + return NULL; + } + + if (of_property_read_u32(np, "renesas,channel-id", &channel_id)) { + dev_err(dev, "channel id missing\n"); + return NULL; + } + if (channel_id >= CMT_MAX_CHANNELS) { + dev_err(dev, "invalid channel id\n"); + return NULL; + } + + cfg->channel_offset = sh_cmt_offset_multiplier[timer_id] * + (channel_id + 1); + cfg->timer_bit = channel_id; + + /* + * We convert the {source,event}-quality DT properties to linux specific + * clock{source,event}_ratings. + */ + if (!of_property_read_u32(np, "renesas,source-quality", &rating)) { + if (rating > 10) { + dev_err(dev, "invalid source-quality\n"); + return NULL; + } + if (rating) + cfg->clocksource_rating = rating * 50 - 1; + } + + if (!of_property_read_u32(np, "renesas,event-quality", &rating)) { + if (rating > 10) { + dev_err(dev, "invalid event-quality\n"); + return NULL; + } + if (rating) + cfg->clockevent_rating = rating * 50 - 1; + } + + if (!cfg->clocksource_rating && !cfg->clockevent_rating) { + dev_err(dev, "source- and event-quality 0, timer is unused\n"); + return NULL; + } + + return cfg; +} + +static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev, + struct sh_timer_config *cfg) { - struct sh_timer_config *cfg = pdev->dev.platform_data; struct resource *res; int irq, ret; ret = -ENXIO; memset(p, 0, sizeof(*p)); p->pdev = pdev; + p->channel_offset = cfg->channel_offset; + p->timer_bit = cfg->timer_bit; if (!cfg) { dev_err(&p->pdev->dev, "missing platform data\n"); @@ -777,7 +853,7 @@ err0: static int sh_cmt_probe(struct platform_device *pdev) { struct sh_cmt_priv *p = platform_get_drvdata(pdev); - struct sh_timer_config *cfg = pdev->dev.platform_data; + struct sh_timer_config *cfg; int ret; if (!is_early_platform_device(pdev)) { @@ -785,6 +861,11 @@ static int sh_cmt_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); } + if (pdev->dev.of_node) + cfg = sh_cmt_parse_dt(&pdev->dev); + else + cfg = pdev->dev.platform_data; + if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); goto out; @@ -796,7 +877,7 @@ static int sh_cmt_probe(struct platform_device *pdev) return -ENOMEM; } - ret = sh_cmt_setup(p, pdev); + ret = sh_cmt_setup(p, pdev, cfg); if (ret) { kfree(p); pm_runtime_idle(&pdev->dev); @@ -824,6 +905,7 @@ static struct platform_driver sh_cmt_device_driver = { .remove = sh_cmt_remove, .driver = { .name = "sh_cmt", + .of_match_table = of_match_ptr(of_sh_cmt_match), } };
We add the capabilty to probe SH CMT timer devices using Device Tree setup. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> --- v4: Moved the assignments of p->channel_offset and p->timer_bit so that they are ready as soon as setup_irq() is called drivers/clocksource/sh_cmt.c | 108 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 95 insertions(+), 13 deletions(-)