@@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
+ wm8750-apc8750.dtb \
wm8850-w70v2.dtb
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
new file mode 100644
@@ -0,0 +1,26 @@
+/*
+ * wm8750-apc8750.dts
+ * - Device tree file for VIA APC8750
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8750.dtsi"
+
+/ {
+ model = "VIA APC8750";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c>;
+
+ i2c: i2c {
+ wm,pins = <168 169 170 171>;
+ wm,function = <2>; /* alt */
+ wm,pull = <2>; /* pull-up */
+ };
+};
new file mode 100644
@@ -0,0 +1,349 @@
+/*
+ * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "wm,wm8750";
+
+ cpus {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm1176";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+ interrupt-parent = <&intc0>;
+
+ intc0: interrupt-controller@d8140000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ reg = <0xd8140000 0x10000>;
+ #interrupt-cells = <1>;
+ };
+
+ /* Secondary IC cascaded to intc0 */
+ intc1: interrupt-controller@d8150000 {
+ compatible = "via,vt8500-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xD8150000 0x10000>;
+ interrupts = <56 57 58 59 60 61 62 63>;
+ };
+
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8750-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmc@d8130000 {
+ compatible = "via,vt8500-pmc";
+ reg = <0xd8130000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ref24: ref24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ plla: plla {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x200>;
+ };
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
+ pllc: pllc {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x208>;
+ };
+
+ plld: plld {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x20C>;
+ };
+
+ plle: plle {
+ #clock-cells = <0>;
+ compatible = "wm,wm8750-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x210>;
+ };
+
+ clkarm: arm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plla>;
+ divisor-reg = <0x300>;
+ };
+
+ clkahb: ahb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x304>;
+ };
+
+ clkddr: ddr {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&plld>;
+ divisor-reg = <0x310>;
+ };
+
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <24>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <25>;
+ };
+
+ clkuart2: uart2 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <26>;
+ };
+
+ clkuart3: uart3 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <27>;
+ };
+
+ clkuart4: uart4 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <28>;
+ };
+
+ clkuart5: uart5 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x254>;
+ enable-bit = <29>;
+ };
+
+ clkpwm: pwm {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x350>;
+ enable-reg = <0x250>;
+ enable-bit = <17>;
+ };
+
+ clksdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x330>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x250>;
+ enable-bit = <0>;
+ };
+
+ clksf: sf {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x314>;
+ enable-reg = <0x254>;
+ enable-bit = <23>;
+ };
+
+ clki2c0: i2c0clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A0>;
+ enable-reg = <0x250>;
+ enable-bit = <8>;
+ };
+
+ clki2c1: i2c1clk {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x3A4>;
+ enable-reg = <0x250>;
+ enable-bit = <9>;
+ };
+ };
+ };
+
+ sf@d8002000 {
+ compatible = "wm,wm8505-sf";
+ reg = <0xd8002000 0x400>;
+ clocks = <&clksf>;
+ };
+
+ pwm: pwm@d8220000 {
+ #pwm-cells = <3>;
+ compatible = "via,vt8500-pwm";
+ reg = <0xd8220000 0x100>;
+ clocks = <&clkpwm>;
+ };
+
+ timer@d8130100 {
+ compatible = "via,vt8500-timer";
+ reg = <0xd8130100 0x28>;
+ interrupts = <36>;
+ };
+
+ ehci@d8007900 {
+ compatible = "via,vt8500-ehci";
+ reg = <0xd8007900 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci@d8007b00 {
+ compatible = "platform-uhci";
+ reg = <0xd8007b00 0x200>;
+ interrupts = <26>;
+ };
+
+ uhci@d8008d00 {
+ compatible = "platform-uhci";
+ reg = <0xd8008d00 0x200>;
+ interrupts = <26>;
+ };
+
+ uart0: uart@d8200000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8200000 0x1040>;
+ interrupts = <32>;
+ clocks = <&clkuart0>;
+ };
+
+ uart1: uart@d82b0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82b0000 0x1040>;
+ interrupts = <33>;
+ clocks = <&clkuart1>;
+ };
+
+ uart2: uart@d8210000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8210000 0x1040>;
+ interrupts = <47>;
+ clocks = <&clkuart2>;
+ };
+
+ uart3: uart@d82c0000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd82c0000 0x1040>;
+ interrupts = <50>;
+ clocks = <&clkuart3>;
+ };
+
+ uart4: uart@d8370000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8370000 0x1040>;
+ interrupts = <30>;
+ clocks = <&clkuart4>;
+ };
+
+ uart5: uart@d8380000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8380000 0x1040>;
+ interrupts = <43>;
+ clocks = <&clkuart5>;
+ };
+
+ rtc@d8100000 {
+ compatible = "via,vt8500-rtc";
+ reg = <0xd8100000 0x10000>;
+ interrupts = <48>;
+ };
+
+ sdhc@d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x1000>;
+ interrupts = <20 21>;
+ clocks = <&clksdhc>;
+ bus-width = <4>;
+ sdon-inverted;
+ };
+
+ i2c_0: i2c@d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };
+
+ i2c_1: i2c@d8320000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8320000 0x1000>;
+ interrupts = <18>;
+ clocks = <&clki2c1>;
+ clock-frequency = <400000>;
+ };
+ };
+};
This patch adds support for the WonderMedia WM8750 SoC and the VIA APC8750 board. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/wm8750-apc8750.dts | 26 +++ arch/arm/boot/dts/wm8750.dtsi | 349 ++++++++++++++++++++++++++++++++++ 3 files changed, 376 insertions(+) create mode 100644 arch/arm/boot/dts/wm8750-apc8750.dts create mode 100644 arch/arm/boot/dts/wm8750.dtsi