@@ -19,16 +19,6 @@
#ifndef __MACH_TEGRA_FUSE_H
#define __MACH_TEGRA_FUSE_H
-enum tegra_revision {
- TEGRA_REVISION_UNKNOWN = 0,
- TEGRA_REVISION_A01,
- TEGRA_REVISION_A02,
- TEGRA_REVISION_A03,
- TEGRA_REVISION_A03p,
- TEGRA_REVISION_A04,
- TEGRA_REVISION_MAX,
-};
-
#define SKU_ID_T20 8
#define SKU_ID_T25SE 20
#define SKU_ID_AP25 23
@@ -40,6 +30,17 @@ enum tegra_revision {
#define TEGRA30 0x30
#define TEGRA114 0x35
+#ifndef __ASSEMBLY__
+enum tegra_revision {
+ TEGRA_REVISION_UNKNOWN = 0,
+ TEGRA_REVISION_A01,
+ TEGRA_REVISION_A02,
+ TEGRA_REVISION_A03,
+ TEGRA_REVISION_A03p,
+ TEGRA_REVISION_A04,
+ TEGRA_REVISION_MAX,
+};
+
extern int tegra_sku_id;
extern int tegra_cpu_process_id;
extern int tegra_core_process_id;
@@ -72,5 +73,6 @@ void tegra114_init_speedo_data(void);
#else
static inline void tegra114_init_speedo_data(void) {}
#endif
+#endif /* __ASSEMBLY__ */
#endif
@@ -22,11 +22,11 @@
#include <asm/hardware/cache-l2x0.h>
#include "flowctrl.h"
+#include "fuse.h"
#include "iomap.h"
#include "reset.h"
#include "sleep.h"
-#define APB_MISC_GP_HIDREV 0x804
#define PMC_SCRATCH41 0x140
#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
@@ -49,10 +49,8 @@ ENTRY(tegra_resume)
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
/* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
+ cmp r6, #TEGRA20
beq 1f @ Yes
/* Clear the flow controller flags for this CPU. */
mov32 r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR @ CPU0 CSR
@@ -98,7 +96,7 @@ ENTRY(__tegra_cpu_reset_handler_start)
* Register usage within the reset handler:
*
* Others: scratch
- * R6 = SoC ID << 8
+ * R6 = SoC ID
* R7 = CPU present (to the OS) mask
* R8 = CPU in LP1 state mask
* R9 = CPU in LP2 state mask
@@ -115,12 +113,10 @@ ENTRY(__tegra_cpu_reset_handler)
cpsid aif, 0x13 @ SVC mode, interrupts disabled
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r6, [r6, #APB_MISC_GP_HIDREV]
- and r6, r6, #0xff00
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
t20_check:
- cmp r6, #(0x20 << 8)
+ cmp r6, #TEGRA20
bne after_t20_check
t20_errata:
# Tegra20 is a Cortex-A9 r1p1
@@ -136,7 +132,7 @@ after_t20_check:
#endif
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
t30_check:
- cmp r6, #(0x30 << 8)
+ cmp r6, #TEGRA30
bne after_t30_check
t30_errata:
# Tegra30 is a Cortex-A9 r2p9
@@ -163,7 +159,7 @@ after_errata:
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
/* Are we on Tegra20? */
- cmp r6, #(0x20 << 8)
+ cmp r6, #TEGRA20
bne 1f
/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
mov32 r5, TEGRA_PMC_BASE
@@ -210,10 +206,7 @@ __die:
mov32 r7, TEGRA_CLK_RESET_BASE
/* Are we on Tegra20? */
- mov32 r6, TEGRA_APB_MISC_BASE
- ldr r0, [r6, #APB_MISC_GP_HIDREV]
- and r0, r0, #0xff00
- cmp r0, #(0x20 << 8)
+ cmp r6, #TEGRA20
bne 1f
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
@@ -85,6 +85,15 @@
dsb
.endm
+/* Macro to check Tegra revision */
+#define APB_MISC_GP_HIDREV 0x804
+.macro tegra_get_soc_id base, tmp1
+ mov32 \tmp1, \base
+ ldr \tmp1, [\tmp1, #APB_MISC_GP_HIDREV]
+ and \tmp1, \tmp1, #0xff00
+ mov \tmp1, \tmp1, lsr #8
+.endm
+
/* Macro to resume & re-enable L2 cache */
#ifndef L2X0_CTRL_EN
#define L2X0_CTRL_EN 1
There are some Tegra SoC ID checking code around the low level assembly code. Adding a marco to replace them. For the single image to support all the Tegra series, we may also need the marco in other common code. So we make it become a marco for the usage. Signed-off-by: Joseph Lo <josephl@nvidia.com> --- V2: * refine the tegra_get_soc_id marco --- arch/arm/mach-tegra/fuse.h | 22 ++++++++++++---------- arch/arm/mach-tegra/reset-handler.S | 25 +++++++++---------------- arch/arm/mach-tegra/sleep.h | 9 +++++++++ 3 files changed, 30 insertions(+), 26 deletions(-)