@@ -26,7 +26,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <>;
+ pinctrl-0 = <&clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
@@ -50,6 +50,12 @@
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ 0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ >;
+ };
};
ocp {
@@ -26,7 +26,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+ pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
@@ -65,6 +65,12 @@
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ 0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ >;
+ };
};
ocp {
@@ -32,7 +32,7 @@
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_s0>;
+ pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
@@ -65,6 +65,12 @@
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ 0x1b4 0x03 /* xdma_event_intr1.clkout2 OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ >;
+ };
};
ocp {
xdma_event_intr1.clkout2 pad can be used to source clock from either 32K OSC or any of the PLL (except MPU) outputs. On the existing AM335x based boards (EVM, EVM-SK and Bone), this pad is used to feed the clock to audio codes. So, this patch configures the pinmux to get clkout2 on the pad. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> --- arch/arm/boot/dts/am335x-bone.dts | 8 +++++++- arch/arm/boot/dts/am335x-evm.dts | 8 +++++++- arch/arm/boot/dts/am335x-evmsk.dts | 8 +++++++- 3 files changed, 21 insertions(+), 3 deletions(-) -- 1.7.0.4