| Message ID | 1369653569-21855-1-git-send-email-linus.walleij@stericsson.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 27 May 2013 13:19, Linus Walleij <linus.walleij@stericsson.com> wrote: > From: Linus Walleij <linus.walleij@linaro.org> > > In patch: > "ARM: ux500: Enable 100MHz for SD/SDIO/MMC devices" > the max frequency for the MMC/SD/SDIO adapters was > increased from 50 to 100MHz. Do the same for the > device tree boot path. > > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Gabriel Fernandez <gabriel.fernandez.st@gmail.com> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > arch/arm/boot/dts/ccu9540.dts | 2 +- > arch/arm/boot/dts/href.dtsi | 8 ++++---- > arch/arm/boot/dts/hrefv60plus.dts | 8 ++++---- > arch/arm/boot/dts/snowball.dts | 4 ++-- > 4 files changed, 11 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts > index c72d7aa..b657d71 100644 > --- a/arch/arm/boot/dts/ccu9540.dts > +++ b/arch/arm/boot/dts/ccu9540.dts > @@ -52,7 +52,7 @@ > // WLAN SDIO channel > sdi1_per2@80118000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <4>; > > status = "okay"; > diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi > index e315429..567a18b 100644 > --- a/arch/arm/boot/dts/href.dtsi > +++ b/arch/arm/boot/dts/href.dtsi > @@ -108,7 +108,7 @@ > // External Micro SD slot > sdi0_per1@80126000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <4>; > mmc-cap-sd-highspeed; > mmc-cap-mmc-highspeed; > @@ -123,7 +123,7 @@ > // WLAN SDIO channel > sdi1_per2@80118000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <4>; > > status = "okay"; > @@ -132,7 +132,7 @@ > // PoP:ed eMMC > sdi2_per3@80005000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <8>; > mmc-cap-mmc-highspeed; > > @@ -142,7 +142,7 @@ > // On-board eMMC > sdi4_per2@80114000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <8>; > mmc-cap-mmc-highspeed; > vmmc-supply = <&ab8500_ldo_aux2_reg>; > diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts > index 5dfc73a..26f33a6f 100644 > --- a/arch/arm/boot/dts/hrefv60plus.dts > +++ b/arch/arm/boot/dts/hrefv60plus.dts > @@ -34,7 +34,7 @@ > // External Micro SD slot > sdi0_per1@80126000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <4>; > mmc-cap-sd-highspeed; > mmc-cap-mmc-highspeed; > @@ -48,7 +48,7 @@ > // WLAN SDIO channel > sdi1_per2@80118000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <4>; > > status = "okay"; > @@ -57,7 +57,7 @@ > // PoP:ed eMMC > sdi2_per3@80005000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <8>; > mmc-cap-mmc-highspeed; > > @@ -67,7 +67,7 @@ > // On-board eMMC > sdi4_per2@80114000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <8>; > mmc-cap-mmc-highspeed; > vmmc-supply = <&ab8500_ldo_aux2_reg>; > diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts > index e8219cc7..829a65f 100644 > --- a/arch/arm/boot/dts/snowball.dts > +++ b/arch/arm/boot/dts/snowball.dts > @@ -129,7 +129,7 @@ > // External Micro SD slot > sdi0_per1@80126000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <4>; > mmc-cap-mmc-highspeed; > vmmc-supply = <&ab8500_ldo_aux3_reg>; > @@ -144,7 +144,7 @@ > // On-board eMMC > sdi4_per2@80114000 { > arm,primecell-periphid = <0x10480180>; > - max-frequency = <50000000>; > + max-frequency = <100000000>; > bus-width = <8>; > mmc-cap-mmc-highspeed; > vmmc-supply = <&ab8500_ldo_aux2_reg>; > -- > 1.7.11.3 > Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts index c72d7aa..b657d71 100644 --- a/arch/arm/boot/dts/ccu9540.dts +++ b/arch/arm/boot/dts/ccu9540.dts @@ -52,7 +52,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi index e315429..567a18b 100644 --- a/arch/arm/boot/dts/href.dtsi +++ b/arch/arm/boot/dts/href.dtsi @@ -108,7 +108,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -123,7 +123,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -132,7 +132,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -142,7 +142,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 5dfc73a..26f33a6f 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -34,7 +34,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-sd-highspeed; mmc-cap-mmc-highspeed; @@ -48,7 +48,7 @@ // WLAN SDIO channel sdi1_per2@80118000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; status = "okay"; @@ -57,7 +57,7 @@ // PoP:ed eMMC sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; @@ -67,7 +67,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index e8219cc7..829a65f 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -129,7 +129,7 @@ // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; @@ -144,7 +144,7 @@ // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; - max-frequency = <50000000>; + max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>;