@@ -37,6 +37,30 @@
};
};
+ vdd:fixed-regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ dbvdd:fixed-regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dbvdd-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ spkvdd:fixed-regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "spkvdd-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
i2c@12C70000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
@@ -47,8 +71,17 @@
};
wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
};
This patch adds the required regulator supplies and properties for wm8994 codec on smdk5250 board. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> --- Changes since V1: - Clubbed the same supply regulators as suggested by Mark. arch/arm/boot/dts/exynos5250-smdk5250.dts | 37 +++++++++++++++++++++++++++- 1 files changed, 35 insertions(+), 2 deletions(-)