@@ -86,8 +86,12 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
if (mux->lock)
spin_lock_irqsave(mux->lock, flags);
- val = readl(mux->reg);
- val &= ~(mux->mask << mux->shift);
+ if (mux->flags & CLK_MUX_HIWORD_MASK) {
+ val = mux->mask << (mux->shift + 16);
+ } else {
+ val = readl(mux->reg);
+ val &= ~(mux->mask << mux->shift);
+ }
val |= index << mux->shift;
writel(val, mux->reg);
@@ -111,6 +115,15 @@ struct clk *clk_register_mux_table(struct device *dev, const char *name,
struct clk_mux *mux;
struct clk *clk;
struct clk_init_data init;
+ u8 width = 0;
+
+ if (clk_mux_flags & CLK_MUX_HIWORD_MASK) {
+ width = fls(mask) - ffs(mask) + 1;
+ if (width + shift > 16) {
+ pr_err("mux value exceeds LOWORD field\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
/* allocate the mux */
mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
@@ -299,6 +299,10 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
* Flags:
* CLK_MUX_INDEX_ONE - register index starts at 1, not 0
* CLK_MUX_INDEX_BIT - register index is a single bit (power of two)
+ * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this
+ * register, and mask of mux bits are in higher 16-bit of this register.
+ * While setting the mux bits, higher 16-bit should also be updated to
+ * indicate changing mux bits.
*/
struct clk_mux {
struct clk_hw hw;
@@ -312,6 +316,7 @@ struct clk_mux {
#define CLK_MUX_INDEX_ONE BIT(0)
#define CLK_MUX_INDEX_BIT BIT(1)
+#define CLK_MUX_HIWORD_MASK BIT(2)
extern const struct clk_ops clk_mux_ops;