[v2,5/5] ARM: OMAP1: nokia770: enable Tahvo

Commit Message

Aaro Koskinen June 16, 2013, 1:35 p.m. UTC

Add platform data for Tahvo.

Signed-off-by: Aaro Koskinen <[e-mail]>
---
 arch/arm/mach-omap1/board-nokia770.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Tony Lindgren June 18, 2013, 10:16 a.m. UTC | #1

* Aaro Koskinen <[e-mail]> [130616 06:41]:
> Add platform data for Tahvo.
> 
> Signed-off-by: Aaro Koskinen <[e-mail]>

Thanks, applying into omap-for-v3.11/board. I left out
the .extcon entry to remove the dependency to the USB patches.

Then the rest of the series can be queued along with other
USB patches, and you can do a follow-up patch to patch in
.extcon.

Regards,

Tony

Patch

diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 62a15e2..85089d8 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -156,6 +156,7 @@  static struct omap_usb_config nokia770_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 6,
+	.extcon		= "tahvo-usb",
 };
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
@@ -234,16 +235,26 @@  static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
 	{
 		I2C_BOARD_INFO("retu-mfd", 0x01),
 	},
+	{
+		I2C_BOARD_INFO("tahvo-mfd", 0x02),
+	},
 };
 
 static void __init nokia770_cbus_init(void)
 {
 	const int retu_irq_gpio = 62;
+	const int tahvo_irq_gpio = 40;
 
 	if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
 		return;
+	if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) {
+		gpio_free(retu_irq_gpio);
+		return;
+	}
 	irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING);
 	nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
+	nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio);
 	i2c_register_board_info(2, nokia770_i2c_board_info_2,
 				ARRAY_SIZE(nokia770_i2c_board_info_2));
 	platform_device_register(&nokia770_cbus_device);