new file mode 100644
@@ -0,0 +1,21 @@
+* i.MX Real Time Clock controller
+
+This binding supports the following chips: i.MX1, i.MX27, i.MX31, i.MX35
+
+Required properties:
+- compatible: should be: "fsl,imx1-rtc" or "fsl,imx21-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: rtc alarm interrupt
+- clocks : Should contain the rtc and ipg clocks, in the order
+ determined by the clock-names property.
+
+Example:
+
+rtc@10007000 {
+ compatible = "fsl,imx27-rtc", "fsl,imx21-rtc";
+ reg = <0x10007000 0x1000>;
+ interrupts = <22>;
+ clocks = <&clks 2>, <&clks 33>;
+ clock-names = "rtc", "ipg";
+};
@@ -13,6 +13,8 @@
#include <linux/rtc.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
@@ -351,7 +353,16 @@ static int mxc_rtc_probe(struct platform_device *pdev)
/* Disable all interrupts */
writew(0, pdata->ioaddr + RTC_RTCIENR);
- pdata->devtype = pdev->id_entry->driver_data;
+ if (pdev->dev.of_node) {
+ struct platform_driver *pdrv = container_of(pdev->dev.driver,
+ struct platform_driver, driver);
+ const struct of_device_id *of_id =
+ of_match_device(pdrv->driver.of_match_table, &pdev->dev);
+
+ pdata->devtype = (enum imx_rtc_type)of_id->data;
+ } else
+ pdata->devtype = pdev->id_entry->driver_data;
+
platform_set_drvdata(pdev, pdata);
pdata->rtc_ops.open = mxc_rtc_open;
@@ -422,6 +433,13 @@ static int __maybe_unused mxc_rtc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
+static const struct of_device_id mxc_rtc_dt_ids[] = {
+ { .compatible = "fsl,imx1-rtc", .data = (void *)IMX1_RTC, },
+ { .compatible = "fsl,imx21-rtc", .data = (void *)IMX21_RTC, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mxc_rtc_dt_ids);
+
static const struct platform_device_id mxc_rtc_id_table[] = {
{ .name = "imx1-rtc", .driver_data = IMX1_RTC, },
{ .name = "imx21-rtc", .driver_data = IMX21_RTC, },
@@ -431,9 +449,10 @@ MODULE_DEVICE_TABLE(platform, mxc_rtc_id_table);
static struct platform_driver mxc_rtc_driver = {
.driver = {
- .name = "mxc_rtc",
- .owner = THIS_MODULE,
- .pm = &mxc_rtc_pm_ops,
+ .name = "mxc_rtc",
+ .owner = THIS_MODULE,
+ .of_match_table = mxc_rtc_dt_ids,
+ .pm = &mxc_rtc_pm_ops,
},
.probe = mxc_rtc_probe,
.remove = mxc_rtc_remove,
Add DT bindings for the mxc_rtc driver and read the device configuration from the DT node at probe time if available. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- Documentation/devicetree/bindings/rtc/mxc-rtc.txt | 21 ++++++++++++++++++ drivers/rtc/rtc-mxc.c | 27 +++++++++++++++++++---- 2 files changed, 44 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/rtc/mxc-rtc.txt