@@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu)
void __ref tegra_cpu_die(unsigned int cpu)
{
/* Clean L1 data cache */
- tegra_disable_clean_inv_dcache();
+ tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS);
/* Shut down the current CPU. */
tegra_hotplug_shutdown();
@@ -191,6 +191,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish)
mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency
/* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_LOUIS
bl tegra_disable_clean_inv_dcache
mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41
@@ -137,6 +137,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish)
mov r7, lr
/* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_LOUIS
bl tegra_disable_clean_inv_dcache
/* Powergate this CPU. */
@@ -56,7 +56,9 @@ ENTRY(tegra_disable_clean_inv_dcache)
isb
/* Flush the D-cache */
- bl v7_flush_dcache_louis
+ cmp r0, #TEGRA_FLUSH_CACHE_ALL
+ blne v7_flush_dcache_louis
+ bleq v7_flush_dcache_all
/* Trun off coherency */
exit_smp r4, r5
@@ -73,9 +75,12 @@ ENDPROC(tegra_disable_clean_inv_dcache)
* tegra?_tear_down_cpu
*/
ENTRY(tegra_sleep_cpu_finish)
+ mov r4, r0
/* Flush and disable the L1 data cache */
+ mov r0, #TEGRA_FLUSH_CACHE_ALL
bl tegra_disable_clean_inv_dcache
+ mov r0, r4
mov32 r6, tegra_tear_down_cpu
ldr r1, [r6]
add r1, r1, r0
@@ -41,6 +41,10 @@
#define CPU_NOT_RESETTABLE 0
#endif
+/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */
+#define TEGRA_FLUSH_CACHE_LOUIS 0
+#define TEGRA_FLUSH_CACHE_ALL 1
+
#ifdef __ASSEMBLY__
/* returns the offset of the flow controller halt register for a cpu */
.macro cpu_to_halt_reg rd, rcpu
@@ -144,7 +148,7 @@ void tegra_pen_lock(void);
void tegra_pen_unlock(void);
void tegra_resume(void);
int tegra_sleep_cpu_finish(unsigned long);
-void tegra_disable_clean_inv_dcache(void);
+void tegra_disable_clean_inv_dcache(u32 flag);
#ifdef CONFIG_HOTPLUG_CPU
void tegra20_hotplug_shutdown(void);
Adding a flag for tegra_disable_clean_inv_dcache to flush cache as LoUIS or ALL. After this patch, the v7_flush_dcache_louis is used for CPU hotplug and CPU suspend in CPU power down (e.g. CPU idle power-down mode) case. And the v7_flush_dcache_all is used for CPU cluster power down (e.g. suspend to LP2 mode). Signed-off-by: Joseph Lo <josephl@nvidia.com> --- V2: * change the define value of TEGRA_FLUSH_CACHE_LOUIS and ALL to 0 and 1 --- arch/arm/mach-tegra/hotplug.c | 2 +- arch/arm/mach-tegra/sleep-tegra20.S | 1 + arch/arm/mach-tegra/sleep-tegra30.S | 1 + arch/arm/mach-tegra/sleep.S | 7 ++++++- arch/arm/mach-tegra/sleep.h | 6 +++++- 5 files changed, 14 insertions(+), 3 deletions(-)