diff mbox

ARM: tegra: enable gpio-keys on dalmore

Message ID 1373028111-24246-1-git-send-email-ldewangan@nvidia.com (mailing list archive)
State New, archived
Headers show

Commit Message

Laxman Dewangan July 5, 2013, 12:41 p.m. UTC
Dalmore have the keys mounted on board which are connected
to different pins of Tegra.

Add the keys entry in DTS file to enable key functionality.
This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and
KEY_VOLUMEDOWN.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 arch/arm/boot/dts/tegra114-dalmore.dts |   29 +++++++++++++++++++++++++++++
 1 files changed, 29 insertions(+), 0 deletions(-)

Comments

Stephen Warren July 5, 2013, 6:43 p.m. UTC | #1
On 07/05/2013 06:41 AM, Laxman Dewangan wrote:
> Dalmore have the keys mounted on board which are connected
> to different pins of Tegra.
> 
> Add the keys entry in DTS file to enable key functionality.
> This will enable KEY_POWER, KEY_HOME, KEY_VOLUMEUP and
> KEY_VOLUMEDOWN.

> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts

>  			 <&tegra_car TEGRA114_CLK_EXTERN1>;
>  		clock-names = "pll_a", "pll_a_out0", "mclk";
>  	};
> +
> +	gpio-keys {

The node above is "sound". This node should be before that node so
they're alphabetically sorted.

> +		compatible = "gpio-keys";
> +
> +		power {
> +			label = "Power";
> +			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
> +			linux,code = <116>; /* KEY_POWER */
> +			gpio-key,wakeup;
> +		};
> +
> +		home {

Similarly, the nodes inside gpio-keys should also be sorted alphabetically.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cb640eb..886b66d 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -976,4 +976,33 @@ 
 			 <&tegra_car TEGRA114_CLK_EXTERN1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <102>; /* KEY_HOME */
+		};
+
+		volume_up {
+			label = "VolumeUp";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume_down {
+			label = "VolumeDown";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
 };