| Message ID | 1374079538-19548-6-git-send-email-nm@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index a55f4d8..c6d560b 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -362,10 +362,11 @@ ldo3_reg: ldo3 { /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 {
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. LDO3 supplies Low Latency Interface(LLI) hardware module which is a special hardware to communicate with Modem. However since uEVM is not setup by default for this communication, this should be disabled by default. Further, vdda_lli is supposed to be 1.5V and not 3V. Reported-by: Marc Jüttner <m-juettner@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm/boot/dts/omap5-uevm.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)