From patchwork Wed Jul 17 16:51:49 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Lunn X-Patchwork-Id: 2828947 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 1D5B7C0AB2 for ; Wed, 17 Jul 2013 18:03:07 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 760D920499 for ; Wed, 17 Jul 2013 18:03:06 +0000 (UTC) Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id CF53520497 for ; Wed, 17 Jul 2013 18:03:04 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UzV1y-0006xJ-3G; Wed, 17 Jul 2013 16:56:49 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UzUy6-0001vE-DD; Wed, 17 Jul 2013 16:52:46 +0000 Received: from londo.lunn.ch ([80.238.139.98]) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UzUxk-0001sF-VZ for linux-arm-kernel@lists.infradead.org; Wed, 17 Jul 2013 16:52:27 +0000 Received: from lunn by londo.lunn.ch with local (Exim 3.36 #1 (Debian)) id 1UzUxG-0006LI-00; Wed, 17 Jul 2013 18:51:54 +0200 From: Andrew Lunn To: tero.jaasko@gmail.com, tibor@harsszegi.com, Jason Cooper Subject: [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant Date: Wed, 17 Jul 2013 18:51:49 +0200 Message-Id: <1374079910-24345-2-git-send-email-andrew@lunn.ch> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1374079910-24345-1-git-send-email-andrew@lunn.ch> References: <1374079910-24345-1-git-send-email-andrew@lunn.ch> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130717_125225_472834_CC5DA798 X-CRM114-Status: GOOD ( 11.55 ) X-Spam-Score: -1.5 (-) Cc: Andrew Lunn , linux ARM X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.6 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP There are a number of variants of the ZyXEL NSA310, with slightly different LEDs, buttons and i2c devices. Add a DTS file to support one more of these variants. Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 107 ++++++++++++++++ arch/arm/boot/dts/kirkwood-nsa310.dts | 100 +-------------- arch/arm/boot/dts/kirkwood-nsa310a.dts | 165 +++++++++++++++++++++++++ 4 files changed, 274 insertions(+), 99 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-nsa310-common.dtsi create mode 100644 arch/arm/boot/dts/kirkwood-nsa310a.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 641b3c9..d2ffa39 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-nsa310a.dtb \ kirkwood-sheevaplug.dtb \ kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi new file mode 100644 index 0000000..8f739c8 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -0,0 +1,107 @@ +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "ZyXEL NSA310"; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + pmx_pwr_off: pmx-pwr-off { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; + + serial@12000 { + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_pwr_off>; + pinctrl-names = "default"; + gpios = <&gpio1 16 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-names = "default"; + + usb0_power_off: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Off"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 6900359..62fb0a9 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,10 +1,8 @@ /dts-v1/; -/include/ "kirkwood.dtsi" -/include/ "kirkwood-6281.dtsi" +/include/ "kirkwood-nsa310-common.dtsi" / { - model = "ZyXEL NSA310"; compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { @@ -41,11 +39,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -95,20 +88,6 @@ marvell,pins = "mpp46"; marvell,function = "gpio"; }; - - pmx_pwr_off: pmx-pwr-off { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; }; i2c@11000 { @@ -119,57 +98,6 @@ reg = <0x2e>; }; }; - - nand@3000000 { - status = "okay"; - chip-delay = <35>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x0100000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; - reg = <0x0100000 0x0080000>; - }; - partition@180000 { - label = "key_store"; - reg = <0x0180000 0x0080000>; - }; - partition@200000 { - label = "info"; - reg = <0x0200000 0x0080000>; - }; - partition@280000 { - label = "etc"; - reg = <0x0280000 0x0a00000>; - }; - partition@c80000 { - label = "kernel_1"; - reg = <0x0c80000 0x0a00000>; - }; - partition@1680000 { - label = "rootfs1"; - reg = <0x1680000 0x2fc0000>; - }; - partition@4640000 { - label = "kernel_2"; - reg = <0x4640000 0x0a00000>; - }; - partition@5040000 { - label = "rootfs2"; - reg = <0x5040000 0x2fc0000>; - }; - }; - - pcie-controller { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - }; }; gpio_keys { @@ -246,30 +174,4 @@ gpios = <&gpio1 8 0>; }; }; - - gpio_poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_pwr_off>; - pinctrl-names = "default"; - gpios = <&gpio1 16 0>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_off>; - pinctrl-names = "default"; - - usb0_power_off: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power Off"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 0>; - }; - }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts new file mode 100644 index 0000000..1070e9d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -0,0 +1,165 @@ +/dts-v1/; + +/include/ "kirkwood-nsa310-common.dtsi" + +/* + * There are at least two different NSA310 designs. This variant does + * not have the red USB Led. + */ + +/ { + compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pinctrl-names = "default"; + + pmx_led_esata_green: pmx-led-esata-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_esata_red: pmx-led-esata-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_usb_power_off: pmx-usb-power-off { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_red: pmx-led-sys-red { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_green: pmx-led-hdd-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd_red: pmx-led-hdd-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + }; + + i2c@11000 { + status = "okay"; + + lm85: lm85@2e { + compatible = "lm85"; + reg = <0x2e>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +};