new file mode 100644
@@ -0,0 +1,48 @@
+Binding for Texas Instruments autoidling clock.
+
+This binding uses the common clock binding[1]. Autoidle clocks
+are inherited clocks from basic divider-clock [2] or
+fixed-factor-clock [3] and just add autoidle support on top of
+this. Autoidle is an OMAP clock feature, which allows the clock
+to gate autonomously by hardware when they are no longer needed.
+The autoidle feature must be enabled manually for these clocks.
+Otherwise the clocks behave exactly as their base clock type.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/divider-clock.txt
+[3] Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
+
+Required properties:
+- compatible : shall be one of:
+ "ti,divider-clock",
+ "ti,fixed-factor-clock"
+- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock
+- reg : base address for the control register of this clock
+
+Optional properties:
+- ti,autoidle-low : autoidle is enabled by setting the bit to 0
+
+Other properties as per the base clock type.
+
+Examples:
+ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@4a0051f0 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_abe_x2_ck>;
+ ti,autoidle-shift = <8>;
+ reg = <0x4a0051f0 0x4>;
+ bit-mask = <0x1f>;
+ index-starts-at-one;
+ ti,autoidle-low;
+ };
+
+ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@4a0081b4 {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&dpll_usb_ck>;
+ ti,autoidle-shift = <8>;
+ clock-div = <1>;
+ reg = <0x4a0081b4 0x4>;
+ clock-mult = <1>;
+ ti,autoidle-low;
+ };
@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void)
list_for_each_entry(c, &clk_hw_omap_clocks, node)
if (c->ops && c->ops->allow_idle)
c->ops->allow_idle(c);
+
+ of_omap_clk_allow_autoidle_all();
+
return 0;
}
@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void)
list_for_each_entry(c, &clk_hw_omap_clocks, node)
if (c->ops && c->ops->deny_idle)
c->ops->deny_idle(c);
+
+ of_omap_clk_deny_autoidle_all();
+
return 0;
}
@@ -1,3 +1,3 @@
ifneq ($(CONFIG_OF),)
-obj-y += clk.o dpll.o
+obj-y += clk.o dpll.o autoidle.o
endif
new file mode 100644
@@ -0,0 +1,121 @@
+/*
+ * OMAP clock autoidle support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct clk_omap_autoidle {
+ void __iomem *reg;
+ u8 shift;
+ u8 flags;
+ const char *name;
+ struct list_head node;
+};
+
+#define AUTOIDLE_LOW 0x1
+
+static LIST_HEAD(autoidle_clks);
+
+static void omap_allow_autoidle(struct clk_omap_autoidle *clk)
+{
+ u32 val;
+
+ val = readl(clk->reg);
+
+ if (clk->flags & AUTOIDLE_LOW)
+ val &= ~(1 << clk->shift);
+ else
+ val |= (1 << clk->shift);
+
+ writel(val, clk->reg);
+}
+
+static void omap_deny_autoidle(struct clk_omap_autoidle *clk)
+{
+ u32 val;
+
+ val = readl(clk->reg);
+
+ if (clk->flags & AUTOIDLE_LOW)
+ val |= (1 << clk->shift);
+ else
+ val &= ~(1 << clk->shift);
+
+ writel(val, clk->reg);
+}
+
+void of_omap_clk_allow_autoidle_all(void)
+{
+ struct clk_omap_autoidle *c;
+
+ list_for_each_entry(c, &autoidle_clks, node)
+ omap_allow_autoidle(c);
+}
+
+void of_omap_clk_deny_autoidle_all(void)
+{
+ struct clk_omap_autoidle *c;
+
+ list_for_each_entry(c, &autoidle_clks, node)
+ omap_deny_autoidle(c);
+}
+
+static void __init of_omap_autoidle_setup(struct device_node *node)
+{
+ u32 shift;
+ void __iomem *reg;
+ struct clk_omap_autoidle *clk;
+
+ if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
+ return;
+
+ reg = of_iomap(node, 0);
+
+ clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+
+ if (!clk) {
+ pr_err("%s: kzalloc failed\n", __func__);
+ return;
+ }
+
+ clk->shift = shift;
+ clk->name = node->name;
+ clk->reg = reg;
+
+ if (of_property_read_bool(node, "ti,autoidle-low"))
+ clk->flags |= AUTOIDLE_LOW;
+
+ list_add(&clk->node, &autoidle_clks);
+}
+
+static void __init of_omap_divider_setup(struct device_node *node)
+{
+ of_divider_clk_setup(node);
+ of_omap_autoidle_setup(node);
+}
+CLK_OF_DECLARE(omap_divider_clock, "ti,divider-clock", of_omap_divider_setup);
+
+static void __init of_omap_fixed_factor_setup(struct device_node *node)
+{
+ of_fixed_factor_clk_setup(node);
+ of_omap_autoidle_setup(node);
+}
+CLK_OF_DECLARE(omap_fixed_factor_clock, "ti,fixed-factor-clock",
+ of_omap_fixed_factor_setup);
@@ -180,6 +180,13 @@ int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap_dt_clocks_register(struct omap_dt_clk *oclks);
+#ifdef CONFIG_OF
+void of_omap_clk_allow_autoidle_all(void);
+void of_omap_clk_deny_autoidle_all(void);
+#else
+static inline void of_omap_clk_allow_autoidle_all(void) { }
+static inline void of_omap_clk_deny_autoidle_all(void) { }
+#endif
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
TI clk driver now routes some of the basic clocks through own registration routine to allow autoidle support. This routine just checks a couple of device node properties and adds autoidle support if required, and just passes the registration forward to basic clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- .../devicetree/bindings/clock/ti/autoidle.txt | 48 ++++++++ arch/arm/mach-omap2/clock.c | 6 + drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/autoidle.c | 121 ++++++++++++++++++++ include/linux/clk/ti.h | 7 ++ 5 files changed, 183 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt create mode 100644 drivers/clk/ti/autoidle.c