@@ -109,9 +109,6 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
#endif /* CONFIG_PPC_MPC52xx */
#ifdef CONFIG_PPC_MPC512x
-
-#if IS_ENABLED(CONFIG_COMMON_CLK)
-
static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
const char *clock_source, int *mscan_clksrc)
{
@@ -277,144 +274,6 @@ static void mpc512x_can_put_clock(struct platform_device *ofdev)
if (priv->clk_ipg)
clk_disable_unprepare(priv->clk_ipg);
}
-
-#else /* COMMON_CLK */
-
-struct mpc512x_clockctl {
- u32 spmr; /* System PLL Mode Reg */
- u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */
- u32 scfr1; /* System Clk Freq Reg 1 */
- u32 scfr2; /* System Clk Freq Reg 2 */
- u32 reserved;
- u32 bcr; /* Bread Crumb Reg */
- u32 pccr[12]; /* PSC Clk Ctrl Reg 0-11 */
- u32 spccr; /* SPDIF Clk Ctrl Reg */
- u32 cccr; /* CFM Clk Ctrl Reg */
- u32 dccr; /* DIU Clk Cnfg Reg */
- u32 mccr[4]; /* MSCAN Clk Ctrl Reg 1-3 */
-};
-
-static struct of_device_id mpc512x_clock_ids[] = {
- { .compatible = "fsl,mpc5121-clock", },
- {}
-};
-
-static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
- const char *clock_name, int *mscan_clksrc)
-{
- struct mpc512x_clockctl __iomem *clockctl;
- struct device_node *np_clock;
- struct clk *sys_clk, *ref_clk;
- int plen, clockidx, clocksrc = -1;
- u32 sys_freq, val, clockdiv = 1, freq = 0;
- const u32 *pval;
-
- np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
- if (!np_clock) {
- dev_err(&ofdev->dev, "couldn't find clock node\n");
- return 0;
- }
- clockctl = of_iomap(np_clock, 0);
- if (!clockctl) {
- dev_err(&ofdev->dev, "couldn't map clock registers\n");
- goto exit_put;
- }
-
- /* Determine the MSCAN device index from the peripheral's
- * physical address. Register address offsets against the
- * IMMR base are: 0x1300, 0x1380, 0x2300, 0x2380
- */
- pval = of_get_property(ofdev->dev.of_node, "reg", &plen);
- BUG_ON(!pval || plen < sizeof(*pval));
- clockidx = (*pval & 0x80) ? 1 : 0;
- if (*pval & 0x2000)
- clockidx += 2;
-
- /*
- * Clock source and divider selection: 3 different clock sources
- * can be selected: "ip", "ref" or "sys". For the latter two, a
- * clock divider can be defined as well. If the clock source is
- * not specified by the device tree, we first try to find an
- * optimal CAN source clock based on the system clock. If that
- * is not posslible, the reference clock will be used.
- */
- if (clock_name && !strcmp(clock_name, "ip")) {
- *mscan_clksrc = MSCAN_CLKSRC_IPS;
- freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
- } else {
- *mscan_clksrc = MSCAN_CLKSRC_BUS;
-
- pval = of_get_property(ofdev->dev.of_node,
- "fsl,mscan-clock-divider", &plen);
- if (pval && plen == sizeof(*pval))
- clockdiv = *pval;
- if (!clockdiv)
- clockdiv = 1;
-
- if (!clock_name || !strcmp(clock_name, "sys")) {
- sys_clk = devm_clk_get(&ofdev->dev, "sys_clk");
- if (IS_ERR(sys_clk)) {
- dev_err(&ofdev->dev, "couldn't get sys_clk\n");
- goto exit_unmap;
- }
- /* Get and round up/down sys clock rate */
- sys_freq = 1000000 *
- ((clk_get_rate(sys_clk) + 499999) / 1000000);
-
- if (!clock_name) {
- /* A multiple of 16 MHz would be optimal */
- if ((sys_freq % 16000000) == 0) {
- clocksrc = 0;
- clockdiv = sys_freq / 16000000;
- freq = sys_freq / clockdiv;
- }
- } else {
- clocksrc = 0;
- freq = sys_freq / clockdiv;
- }
- }
-
- if (clocksrc < 0) {
- ref_clk = devm_clk_get(&ofdev->dev, "ref_clk");
- if (IS_ERR(ref_clk)) {
- dev_err(&ofdev->dev, "couldn't get ref_clk\n");
- goto exit_unmap;
- }
- clocksrc = 1;
- freq = clk_get_rate(ref_clk) / clockdiv;
- }
- }
-
- /* Disable clock */
- out_be32(&clockctl->mccr[clockidx], 0x0);
- if (clocksrc >= 0) {
- /* Set source and divider */
- val = (clocksrc << 14) | ((clockdiv - 1) << 17);
- out_be32(&clockctl->mccr[clockidx], val);
- /* Enable clock */
- out_be32(&clockctl->mccr[clockidx], val | 0x10000);
- }
-
- /* Enable MSCAN clock domain */
- val = in_be32(&clockctl->sccr[1]);
- if (!(val & (1 << 25)))
- out_be32(&clockctl->sccr[1], val | (1 << 25));
-
- dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
- *mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
- clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
-
-exit_unmap:
- iounmap(clockctl);
-exit_put:
- of_node_put(np_clock);
- return freq;
-}
-
-#define mpc512x_can_put_clock NULL
-
-#endif /* COMMON_CLK */
-
#else /* !CONFIG_PPC_MPC512x */
static u32 mpc512x_can_get_clock(struct platform_device *ofdev,
const char *clock_name, int *mscan_clksrc)
transition to the common clock framework has completed and the PPC_CLOCK is no longer available for the MPC512x platform, remove the now obsolete code path of the mpc5xxx mscan driver which accessed clock control module registers directly Signed-off-by: Gerhard Sittig <gsi@denx.de> --- drivers/net/can/mscan/mpc5xxx_can.c | 141 ----------------------------------- 1 file changed, 141 deletions(-)