@@ -28,8 +28,8 @@
#define DALGN 0x00a0
#define DINT 0x00f0
#define DDADR 0x0200
-#define DSADR 0x0204
-#define DTADR 0x0208
+#define DSADR(n) (0x0204 + ((n) << 4))
+#define DTADR(n) (0x0208 + ((n) << 4))
#define DCMD 0x020c
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
@@ -97,6 +97,13 @@ struct mmp_pdma_chan {
struct dma_async_tx_descriptor desc;
struct mmp_pdma_phy *phy;
enum dma_transfer_direction dir;
+ /*
+ * We memorize the original start address of the first descriptor as
+ * well as the original total length so we can later determine the
+ * channel's residue.
+ */
+ dma_addr_t start_addr;
+ u32 total_len;
/* channel's basic info */
struct tasklet_struct tasklet;
@@ -469,6 +476,13 @@ mmp_pdma_prep_memcpy(struct dma_chan *dchan,
chan->dcmd |= DCMD_BURST32;
}
+ if (chan->dir == DMA_MEM_TO_DEV)
+ chan->start_addr = dma_src;
+ else
+ chan->start_addr = dma_dst;
+
+ chan->total_len = len;
+
do {
/* Allocate the link descriptor from DMA pool */
new = mmp_pdma_alloc_descriptor(chan);
@@ -540,11 +554,17 @@ mmp_pdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
return NULL;
chan->byte_align = false;
+ chan->total_len = 0;
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl);
+ if (!first)
+ chan->start_addr = addr;
+
+ chan->total_len += avail;
+
do {
len = min_t(size_t, avail, PDMA_MAX_DESC_BYTES);
if (addr & 0x7)
@@ -671,6 +691,20 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
return ret;
}
+static unsigned int mmp_pdma_residue(struct mmp_pdma_chan *chan)
+{
+ u32 curr, done;
+
+ if (chan->dir == DMA_DEV_TO_MEM)
+ curr = readl(chan->phy->base + DTADR(chan->phy->idx));
+ else
+ curr = readl(chan->phy->base + DSADR(chan->phy->idx));
+
+ done = curr - chan->start_addr;
+
+ return chan->total_len - done;
+}
+
static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
dma_cookie_t cookie, struct dma_tx_state *txstate)
{
@@ -680,6 +714,7 @@ static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
spin_lock_irqsave(&chan->desc_lock, flags);
ret = dma_cookie_status(dchan, cookie, txstate);
+ txstate->residue = mmp_pdma_residue(chan);
spin_unlock_irqrestore(&chan->desc_lock, flags);
return ret;
In order to report the channel's residue, we have to memorize the first dma buffer position when the channel is configured. Signed-off-by: Daniel Mack <zonque@gmail.com> --- drivers/dma/mmp_pdma.c | 39 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-)