@@ -18,11 +18,21 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <asm/cacheflush.h>
+#include <asm/irq_regs.h>
+#include <asm/pmu.h>
#include <asm/smp_plat.h>
+#define DRIVER_NAME "CCI-400"
+#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
+#define PMU_NAME "CCI_400"
+
#define CCI_PORT_CTRL 0x0
#define CCI_CTRL_STATUS 0xc
@@ -54,6 +64,587 @@ static unsigned int nb_cci_ports;
static void __iomem *cci_ctrl_base;
static unsigned long cci_ctrl_phys;
+#ifdef CONFIG_HW_PERF_EVENTS
+
+#define CCI_PMCR 0x0100
+#define CCI_PID2 0x0fe8
+
+#define CCI_PMCR_CEN 0x00000001
+#define CCI_PMCR_NCNT_MASK 0x0000f800
+#define CCI_PMCR_NCNT_SHIFT 11
+
+#define CCI_PID2_REV_MASK 0xf0
+#define CCI_PID2_REV_SHIFT 4
+
+/* Port ids */
+#define CCI_PORT_S0 0
+#define CCI_PORT_S1 1
+#define CCI_PORT_S2 2
+#define CCI_PORT_S3 3
+#define CCI_PORT_S4 4
+#define CCI_PORT_M0 5
+#define CCI_PORT_M1 6
+#define CCI_PORT_M2 7
+
+#define CCI_REV_R0 0
+#define CCI_REV_R1 1
+#define CCI_REV_R0_P4 4
+#define CCI_REV_R1_P2 6
+
+#define CCI_PMU_EVT_SEL 0x000
+#define CCI_PMU_CNTR 0x004
+#define CCI_PMU_CNTR_CTRL 0x008
+#define CCI_PMU_OVRFLW 0x00c
+
+#define CCI_PMU_OVRFLW_FLAG 1
+
+#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K)
+
+/*
+ * Instead of an event id to monitor CCI cycles, a dedicated counter is
+ * provided. Use 0xff to represent CCI cycles and hope that no future revisions
+ * make use of this event in hardware.
+ */
+enum cci400_perf_events {
+ CCI_PMU_CYCLES = 0xff
+};
+
+#define CCI_PMU_EVENT_MASK 0xff
+#define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7)
+#define CCI_PMU_EVENT_CODE(event) (event & 0x1f)
+
+#define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */
+
+#define CCI_PMU_CYCLE_CNTR_IDX 0
+#define CCI_PMU_CNTR0_IDX 1
+#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1)
+
+/*
+ * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8
+ * ports and bits 4:0 are event codes. There are different event codes
+ * associated with each port type.
+ *
+ * Additionally, the range of events associated with the port types changed
+ * between Rev0 and Rev1.
+ *
+ * The constants below define the range of valid codes for each port type for
+ * the different revisions and are used to validate the event to be monitored.
+ */
+
+#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00
+#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13
+#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14
+#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a
+
+#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00
+#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14
+#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00
+#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11
+
+struct pmu_port_event_ranges {
+ u8 slave_min;
+ u8 slave_max;
+ u8 master_min;
+ u8 master_max;
+};
+
+static struct pmu_port_event_ranges port_event_range[] = {
+ [CCI_REV_R0] = {
+ .slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV,
+ .slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV,
+ .master_min = CCI_REV_R0_MASTER_PORT_MIN_EV,
+ .master_max = CCI_REV_R0_MASTER_PORT_MAX_EV,
+ },
+ [CCI_REV_R1] = {
+ .slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV,
+ .slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV,
+ .master_min = CCI_REV_R1_MASTER_PORT_MIN_EV,
+ .master_max = CCI_REV_R1_MASTER_PORT_MAX_EV,
+ },
+};
+
+struct cci_pmu_drv_data {
+ void __iomem *base;
+ struct arm_pmu *cci_pmu;
+ int nr_irqs;
+ int irqs[CCI_PMU_MAX_HW_EVENTS];
+ unsigned long active_irqs;
+ struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
+ unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
+ struct pmu_port_event_ranges *port_ranges;
+ struct pmu_hw_events hw_events;
+};
+static struct cci_pmu_drv_data *pmu;
+
+static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
+{
+ int i;
+
+ for (i = 0; i < nr_irqs; i++)
+ if (irq == irqs[i])
+ return true;
+
+ return false;
+}
+
+static int probe_cci_revision(void)
+{
+ int rev;
+ rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
+ rev >>= CCI_PID2_REV_SHIFT;
+
+ if (rev <= CCI_REV_R0_P4)
+ return CCI_REV_R0;
+ else if (rev <= CCI_REV_R1_P2)
+ return CCI_REV_R1;
+
+ return -ENOENT;
+}
+
+static struct pmu_port_event_ranges *port_range_by_rev(void)
+{
+ int rev = probe_cci_revision();
+
+ if (rev < 0)
+ return NULL;
+
+ return &port_event_range[rev];
+}
+
+static int pmu_is_valid_slave_event(u8 ev_code)
+{
+ return pmu->port_ranges->slave_min <= ev_code &&
+ ev_code <= pmu->port_ranges->slave_max;
+}
+
+static int pmu_is_valid_master_event(u8 ev_code)
+{
+ return pmu->port_ranges->master_min <= ev_code &&
+ ev_code <= pmu->port_ranges->master_max;
+}
+
+static int pmu_validate_hw_event(u8 hw_event)
+{
+ u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event);
+ u8 ev_code = CCI_PMU_EVENT_CODE(hw_event);
+
+ switch (ev_source) {
+ case CCI_PORT_S0:
+ case CCI_PORT_S1:
+ case CCI_PORT_S2:
+ case CCI_PORT_S3:
+ case CCI_PORT_S4:
+ /* Slave Interface */
+ if (pmu_is_valid_slave_event(ev_code))
+ return hw_event;
+ break;
+ case CCI_PORT_M0:
+ case CCI_PORT_M1:
+ case CCI_PORT_M2:
+ /* Master Interface */
+ if (pmu_is_valid_master_event(ev_code))
+ return hw_event;
+ break;
+ }
+
+ return -ENOENT;
+}
+
+static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx)
+{
+ return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
+ idx <= CCI_PMU_CNTR_LAST(cci_pmu);
+}
+
+static u32 pmu_read_register(int idx, unsigned int offset)
+{
+ return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+}
+
+static void pmu_write_register(u32 value, int idx, unsigned int offset)
+{
+ return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset);
+}
+
+static void pmu_disable_counter(int idx)
+{
+ pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL);
+}
+
+static void pmu_enable_counter(int idx)
+{
+ pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL);
+}
+
+static void pmu_set_event(int idx, unsigned long event)
+{
+ event &= CCI_PMU_EVENT_MASK;
+ pmu_write_register(event, idx, CCI_PMU_EVT_SEL);
+}
+
+static u32 pmu_get_max_counters(void)
+{
+ u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) &
+ CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT;
+
+ /* add 1 for cycle counter */
+ return n_cnts + 1;
+}
+
+static struct pmu_hw_events *pmu_get_hw_events(void)
+{
+ return &pmu->hw_events;
+}
+
+static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event)
+{
+ struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hw_event = &event->hw;
+ unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
+ int idx;
+
+ if (cci_event == CCI_PMU_CYCLES) {
+ if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask))
+ return -EAGAIN;
+
+ return CCI_PMU_CYCLE_CNTR_IDX;
+ }
+
+ for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx)
+ if (!test_and_set_bit(idx, hw->used_mask))
+ return idx;
+
+ /* No counters available */
+ return -EAGAIN;
+}
+
+static int pmu_map_event(struct perf_event *event)
+{
+ int mapping;
+ u8 config = event->attr.config & CCI_PMU_EVENT_MASK;
+
+ if (event->attr.type < PERF_TYPE_MAX)
+ return -ENOENT;
+
+ if (config == CCI_PMU_CYCLES)
+ mapping = config;
+ else
+ mapping = pmu_validate_hw_event(config);
+
+ return mapping;
+}
+
+static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler)
+{
+ int i;
+ struct platform_device *pmu_device = cci_pmu->plat_device;
+
+ if (unlikely(!pmu_device))
+ return -ENODEV;
+
+ if (pmu->nr_irqs < 1) {
+ dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Register all available CCI PMU interrupts. In the interrupt handler
+ * we iterate over the counters checking for interrupt source (the
+ * overflowing counter) and clear it.
+ *
+ * This should allow handling of non-unique interrupt for the counters.
+ */
+ for (i = 0; i < pmu->nr_irqs; i++) {
+ int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED,
+ "arm-cci-pmu", cci_pmu);
+ if (err) {
+ dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n",
+ pmu->irqs[i]);
+ return err;
+ }
+
+ set_bit(i, &pmu->active_irqs);
+ }
+
+ return 0;
+}
+
+static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
+{
+ unsigned long flags;
+ struct arm_pmu *cci_pmu = (struct arm_pmu *)dev;
+ struct pmu_hw_events *events = cci_pmu->get_hw_events();
+ struct perf_sample_data data;
+ struct pt_regs *regs;
+ int idx, handled = IRQ_NONE;
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+ regs = get_irq_regs();
+ /*
+ * Iterate over counters and update the corresponding perf events.
+ * This should work regardless of whether we have per-counter overflow
+ * interrupt or a combined overflow interrupt.
+ */
+ for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) {
+ struct perf_event *event = events->events[idx];
+ struct hw_perf_event *hw_counter;
+
+ if (!event)
+ continue;
+
+ hw_counter = &event->hw;
+
+ /* Did this counter overflow? */
+ if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG)
+ continue;
+
+ pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
+
+ handled = IRQ_HANDLED;
+
+ armpmu_event_update(event);
+ perf_sample_data_init(&data, 0, hw_counter->last_period);
+ if (!armpmu_event_set_period(event))
+ continue;
+
+ if (perf_event_overflow(event, &data, regs))
+ cci_pmu->disable(event);
+ }
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void pmu_free_irq(struct arm_pmu *cci_pmu)
+{
+ int i;
+
+ for (i = 0; i < pmu->nr_irqs; i++) {
+ if (!test_and_clear_bit(i, &pmu->active_irqs))
+ continue;
+
+ free_irq(pmu->irqs[i], cci_pmu);
+ }
+}
+
+static void pmu_enable_event(struct perf_event *event)
+{
+ unsigned long flags;
+ struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *events = cci_pmu->get_hw_events();
+ struct hw_perf_event *hw_counter = &event->hw;
+ int idx = hw_counter->idx;
+
+ if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+ dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+ return;
+ }
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ /* Configure the event to count, unless you are counting cycles */
+ if (idx != CCI_PMU_CYCLE_CNTR_IDX)
+ pmu_set_event(idx, hw_counter->config_base);
+
+ pmu_enable_counter(idx);
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void pmu_disable_event(struct perf_event *event)
+{
+ struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hw_counter = &event->hw;
+ int idx = hw_counter->idx;
+
+ if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+ dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+ return;
+ }
+
+ pmu_disable_counter(idx);
+}
+
+static void pmu_start(struct arm_pmu *cci_pmu)
+{
+ u32 val;
+ unsigned long flags;
+ struct pmu_hw_events *events = cci_pmu->get_hw_events();
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ /* Enable all the PMU counters. */
+ val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
+ writel(val, cci_ctrl_base + CCI_PMCR);
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void pmu_stop(struct arm_pmu *cci_pmu)
+{
+ u32 val;
+ unsigned long flags;
+ struct pmu_hw_events *events = cci_pmu->get_hw_events();
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ /* Disable all the PMU counters. */
+ val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
+ writel(val, cci_ctrl_base + CCI_PMCR);
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static u32 pmu_read_counter(struct perf_event *event)
+{
+ struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hw_counter = &event->hw;
+ int idx = hw_counter->idx;
+ u32 value;
+
+ if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+ dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+ return 0;
+ }
+ value = pmu_read_register(idx, CCI_PMU_CNTR);
+
+ return value;
+}
+
+static void pmu_write_counter(struct perf_event *event, u32 value)
+{
+ struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+ struct hw_perf_event *hw_counter = &event->hw;
+ int idx = hw_counter->idx;
+
+ if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
+ dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+ else
+ pmu_write_register(value, idx, CCI_PMU_CNTR);
+}
+
+static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
+{
+ *cci_pmu = (struct arm_pmu){
+ .name = PMU_NAME,
+ .max_period = (1LLU << 32) - 1,
+ .get_hw_events = pmu_get_hw_events,
+ .get_event_idx = pmu_get_event_idx,
+ .map_event = pmu_map_event,
+ .request_irq = pmu_request_irq,
+ .handle_irq = pmu_handle_irq,
+ .free_irq = pmu_free_irq,
+ .enable = pmu_enable_event,
+ .disable = pmu_disable_event,
+ .start = pmu_start,
+ .stop = pmu_stop,
+ .read_counter = pmu_read_counter,
+ .write_counter = pmu_write_counter,
+ };
+
+ cci_pmu->plat_device = pdev;
+ cci_pmu->num_events = pmu_get_max_counters();
+
+ return armpmu_register(cci_pmu, -1);
+}
+
+static const struct of_device_id arm_cci_pmu_matches[] = {
+ {
+ .compatible = "arm,cci-400-pmu",
+ },
+ {},
+};
+
+static int cci_pmu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int i, ret, irq;
+
+ pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_warn(&pdev->dev, "Failed to get mem resource\n");
+ ret = -EINVAL;
+ goto memalloc_err;
+ };
+
+ pmu->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!pmu->base) {
+ dev_warn(&pdev->dev, "Failed to ioremap\n");
+ ret = -ENOMEM;
+ goto memalloc_err;
+ }
+
+ /*
+ * CCI PMU has 5 overflow signals - one per counter; but some may be tied
+ * together to a common interrupt.
+ */
+ pmu->nr_irqs = 0;
+ for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) {
+ irq = platform_get_irq(pdev, i);
+ if (irq < 0)
+ break;
+
+ if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs))
+ continue;
+
+ pmu->irqs[pmu->nr_irqs++] = irq;
+ }
+
+ /*
+ * Ensure that the device tree has as many interrupts as the number
+ * of counters.
+ */
+ if (i < CCI_PMU_MAX_HW_EVENTS) {
+ dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n",
+ i, CCI_PMU_MAX_HW_EVENTS);
+ ret = -EINVAL;
+ goto memalloc_err;
+ }
+
+ pmu->port_ranges = port_range_by_rev();
+ if (!pmu->port_ranges) {
+ dev_warn(&pdev->dev, "CCI PMU version not supported\n");
+ ret = -EINVAL;
+ goto memalloc_err;
+ }
+
+ pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL);
+ if (!pmu->cci_pmu) {
+ ret = -ENOMEM;
+ goto memalloc_err;
+ }
+
+ pmu->hw_events.events = pmu->events;
+ pmu->hw_events.used_mask = pmu->used_mask;
+ raw_spin_lock_init(&pmu->hw_events.pmu_lock);
+
+ ret = cci_pmu_init(pmu->cci_pmu, pdev);
+ if (ret)
+ goto pmuinit_err;
+
+ return 0;
+
+pmuinit_err:
+ kfree(pmu->cci_pmu);
+memalloc_err:
+ kfree(pmu);
+ return ret;
+}
+
+static int cci_platform_probe(struct platform_device *pdev)
+{
+ if (!cci_probed())
+ return -ENODEV;
+
+ return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+}
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
struct cpu_port {
u64 mpidr;
u32 port;
@@ -516,6 +1107,42 @@ static int __init cci_init(void)
return cci_init_status;
}
+#ifdef CONFIG_HW_PERF_EVENTS
+static struct platform_driver cci_pmu_driver = {
+ .driver = {
+ .name = DRIVER_NAME_PMU,
+ .of_match_table = arm_cci_pmu_matches,
+ },
+ .probe = cci_pmu_probe,
+};
+
+static struct platform_driver cci_platform_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = arm_cci_matches,
+ },
+ .probe = cci_platform_probe,
+};
+
+static int __init cci_platform_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&cci_pmu_driver);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&cci_platform_driver);
+}
+
+#else
+
+static int __init cci_platform_init(void)
+{
+ return 0;
+}
+
+#endif
/*
* To sort out early init calls ordering a helper function is provided to
* check if the CCI driver has beed initialized. Function check if the driver
@@ -529,5 +1156,6 @@ bool __init cci_probed(void)
EXPORT_SYMBOL_GPL(cci_probed);
early_initcall(cci_init);
+core_initcall(cci_platform_init);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ARM CCI support");