@@ -12,7 +12,19 @@ Required properties:
a) phandle of the gpio controller node.
b) pin number within the gpio controller.
c) optional flags and pull up/down.
-
+- clocks: list of clock IDs from SoC clock driver.
+ a) hdmi: It is required for gate operation on aclk_200_disp1 clock
+ which clocks the display1 block.
+ b) sclk_hdmi: It is required for gate operation on sclk_hdmi clock
+ which clocks hdmi IP.
+ c) sclk_pixel: Parent for mux mout_hdmi.
+ d) sclk_hdmiphy: Parent for mux mout_hdmi.
+ e) mout_hdmi: It is required by the driver to switch between the 2
+ parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+ after configuration, parent is set to sclk_hdmiphy else
+ sclk_pixel.
+- clock-names: aliases as per driver requirements for above clock IDs:
+ "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
Example:
hdmi {
@@ -10,6 +10,10 @@ Required properties:
- reg: physical base address of the mixer and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
+- clocks: list of clock IDs from SoC clock driver.
+ a) mixer: It is required for gate operation on aclk_200_disp1 clock
+ which clocks the display1 block.
+ b) sclk_hdmi: Parent for mux mout_mixer.
Example:
Adding information about clocks to the binding documentation for exynos mixer and hdmi. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> --- Documentation/devicetree/bindings/video/exynos_hdmi.txt | 14 +++++++++++++- Documentation/devicetree/bindings/video/exynos_mixer.txt | 4 ++++ 2 files changed, 17 insertions(+), 1 deletion(-)