Message ID | 1377785608-30625-1-git-send-email-broonie@kernel.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Quoting Mark Brown (2013-08-29 07:13:28) > From: Mark Brown <broonie@linaro.org> > > Since the driver was written an is_prepared() operation has been made > possible. Since the driver uses I2C I/O only prepare operations are > provided so move the is_enabled() operation over to is_prepared(). > > Signed-off-by: Mark Brown <broonie@linaro.org> Taken into clk-next. Thanks, Mike > --- > drivers/clk/clk-wm831x.c | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c > index 1d5af3f..805b4c3 100644 > --- a/drivers/clk/clk-wm831x.c > +++ b/drivers/clk/clk-wm831x.c > @@ -31,7 +31,7 @@ struct wm831x_clk { > bool xtal_ena; > }; > > -static int wm831x_xtal_is_enabled(struct clk_hw *hw) > +static int wm831x_xtal_is_prepared(struct clk_hw *hw) > { > struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, > xtal_hw); > @@ -52,7 +52,7 @@ static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw, > } > > static const struct clk_ops wm831x_xtal_ops = { > - .is_enabled = wm831x_xtal_is_enabled, > + .is_prepared = wm831x_xtal_is_prepared, > .recalc_rate = wm831x_xtal_recalc_rate, > }; > > @@ -73,7 +73,7 @@ static const unsigned long wm831x_fll_auto_rates[] = { > 24576000, > }; > > -static int wm831x_fll_is_enabled(struct clk_hw *hw) > +static int wm831x_fll_is_prepared(struct clk_hw *hw) > { > struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, > fll_hw); > @@ -170,7 +170,7 @@ static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate, > if (i == ARRAY_SIZE(wm831x_fll_auto_rates)) > return -EINVAL; > > - if (wm831x_fll_is_enabled(hw)) > + if (wm831x_fll_is_prepared(hw)) > return -EPERM; > > return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2, > @@ -220,7 +220,7 @@ static u8 wm831x_fll_get_parent(struct clk_hw *hw) > } > > static const struct clk_ops wm831x_fll_ops = { > - .is_enabled = wm831x_fll_is_enabled, > + .is_prepared = wm831x_fll_is_prepared, > .prepare = wm831x_fll_prepare, > .unprepare = wm831x_fll_unprepare, > .round_rate = wm831x_fll_round_rate, > @@ -237,7 +237,7 @@ static struct clk_init_data wm831x_fll_init = { > .flags = CLK_SET_RATE_GATE, > }; > > -static int wm831x_clkout_is_enabled(struct clk_hw *hw) > +static int wm831x_clkout_is_prepared(struct clk_hw *hw) > { > struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, > clkout_hw); > @@ -335,7 +335,7 @@ static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent) > } > > static const struct clk_ops wm831x_clkout_ops = { > - .is_enabled = wm831x_clkout_is_enabled, > + .is_prepared = wm831x_clkout_is_prepared, > .prepare = wm831x_clkout_prepare, > .unprepare = wm831x_clkout_unprepare, > .get_parent = wm831x_clkout_get_parent, > -- > 1.8.4.rc3
diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index 1d5af3f..805b4c3 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -31,7 +31,7 @@ struct wm831x_clk { bool xtal_ena; }; -static int wm831x_xtal_is_enabled(struct clk_hw *hw) +static int wm831x_xtal_is_prepared(struct clk_hw *hw) { struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, xtal_hw); @@ -52,7 +52,7 @@ static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw, } static const struct clk_ops wm831x_xtal_ops = { - .is_enabled = wm831x_xtal_is_enabled, + .is_prepared = wm831x_xtal_is_prepared, .recalc_rate = wm831x_xtal_recalc_rate, }; @@ -73,7 +73,7 @@ static const unsigned long wm831x_fll_auto_rates[] = { 24576000, }; -static int wm831x_fll_is_enabled(struct clk_hw *hw) +static int wm831x_fll_is_prepared(struct clk_hw *hw) { struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, fll_hw); @@ -170,7 +170,7 @@ static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate, if (i == ARRAY_SIZE(wm831x_fll_auto_rates)) return -EINVAL; - if (wm831x_fll_is_enabled(hw)) + if (wm831x_fll_is_prepared(hw)) return -EPERM; return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2, @@ -220,7 +220,7 @@ static u8 wm831x_fll_get_parent(struct clk_hw *hw) } static const struct clk_ops wm831x_fll_ops = { - .is_enabled = wm831x_fll_is_enabled, + .is_prepared = wm831x_fll_is_prepared, .prepare = wm831x_fll_prepare, .unprepare = wm831x_fll_unprepare, .round_rate = wm831x_fll_round_rate, @@ -237,7 +237,7 @@ static struct clk_init_data wm831x_fll_init = { .flags = CLK_SET_RATE_GATE, }; -static int wm831x_clkout_is_enabled(struct clk_hw *hw) +static int wm831x_clkout_is_prepared(struct clk_hw *hw) { struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, clkout_hw); @@ -335,7 +335,7 @@ static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent) } static const struct clk_ops wm831x_clkout_ops = { - .is_enabled = wm831x_clkout_is_enabled, + .is_prepared = wm831x_clkout_is_prepared, .prepare = wm831x_clkout_prepare, .unprepare = wm831x_clkout_unprepare, .get_parent = wm831x_clkout_get_parent,