[v3,6/8] Documentation: add the binding file for Quadspi driver

Commit Message

Huang Shijie Aug. 30, 2013, 2:07 a.m. UTC

This patch adds the binding file for Freescale Quadspi driver.

Signed-off-by: Huang Shijie <[e-mail]>
---
 .../devicetree/bindings/spi/fsl-quadspi.txt        |   32 ++++++++++++++++++++
 1 files changed, 32 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/fsl-quadspi.txt

Patch

diff --git a/Documentation/devicetree/bindings/spi/fsl-quadspi.txt b/Documentation/devicetree/bindings/spi/fsl-quadspi.txt
new file mode 100644
index 0000000..d86ee84
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/fsl-quadspi.txt
@@ -0,0 +1,32 @@ 
+* Freescale Quad Serial Peripheral Interface(QuadSPI)
+
+Required properties:
+- compatible : Should be "fsl,vf610-qspi"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain the interrupt for the device
+- clocks : The clocks needed by the QuadSPI controller
+- clock-names : the name of the clocks
+- num-cs : Contains the number of the chip selects
+
+Optional properties:
+- fsl,nor-size : If You set this property, it means that you connect the NOR
+                 flash to QuadSPI. This property is mainly used by the QuadSPI
+                 to map an AHB bus accessible address.
+
+Example:
+
+qspi0: quadspi@40044000 {
+	compatible = "fsl,vf610-qspi";
+	reg = <0x40044000 0x1000>;
+	interrupts = <0 24 0x04>;
+	clocks = <&clks VF610_CLK_QSPI0_EN>,
+		<&clks VF610_CLK_QSPI0>;
+	clock-names = "qspi_en", "qspi";
+	fsl,nor-size = <0x1000000>;
+	num-cs = <1>;
+	status = "disabled";
+
+	flash0: s25fl128s@0 {
+		....
+	};
+};