diff mbox

[4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers

Message ID 1379000532-27376-5-git-send-email-koen@dominion.thruhere.net (mailing list archive)
State New, archived
Headers show

Commit Message

Koen Kooi Sept. 12, 2013, 3:42 p.m. UTC
This matches the vendor 3.8.x configuration that is shipping with the boards.

The LED layout is now:

USR0: heartbeat
USR1: mmc0 (micro-SD slot)
USR2: cpu0
USR3: mmc1 (eMMC)

The cpu0 triggers was put inbetween the mmc triggers to make is easier to see
where the disk activity is.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
 arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

Comments

Nishanth Menon Sept. 12, 2013, 4:20 p.m. UTC | #1
On 09/12/2013 10:42 AM, Koen Kooi wrote:
> This matches the vendor 3.8.x configuration that is shipping with the boards.
> 
> The LED layout is now:
> 
> USR0: heartbeat
> USR1: mmc0 (micro-SD slot)
> USR2: cpu0
> USR3: mmc1 (eMMC)
> 
> The cpu0 triggers was put inbetween the mmc triggers to make is easier to see
nitpick: sinbetween/in between/

> where the disk activity is.
> 
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
>  arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 80407ff..3057f30 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -203,12 +203,14 @@
>  		led@4 {
>  			label = "beaglebone:green:usr2";
>  			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "cpu0";
>  			default-state = "off";
>  		};
>  
>  		led@5 {
>  			label = "beaglebone:green:usr3";
>  			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "mmc1";
>  			default-state = "off";
>  		};
>  	};
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 80407ff..3057f30 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -203,12 +203,14 @@ 
 		led@4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 	};