| Message ID | 1379509642-19227-2-git-send-email-ldewangan@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 09/18/2013 07:07 AM, Laxman Dewangan wrote: > Add Palmas pincontrol to Dalmore device tree and make following > configuration as default: > - Disable DVFS1 and DVFS2. > - Set GPIO6 to gpio mode. > - Not sure that this will create the issue with other node having same > name as pinmux in top of the dts file. This isn't an issue. Node names need to be unique within their parents, not globally.
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 6023028..dc5cdd7 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1011,6 +1011,19 @@ interrupt-parent = <&palmas>; interrupts = <8 0>; }; + + pinmux { + compatible = "ti,tps65913-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_default>; + + palmas_default: pinmux { + pin_gpio6 { + pins = "gpio6"; + function = "gpio"; + }; + }; + }; }; };
Add Palmas pincontrol to Dalmore device tree and make following configuration as default: - Disable DVFS1 and DVFS2. - Set GPIO6 to gpio mode. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> --- changes from V1: - Renames the node name to pinmux as suggested on patch V1. - Not sure that this will create the issue with other node having same name as pinmux in top of the dts file. arch/arm/boot/dts/tegra114-dalmore.dts | 13 +++++++++++++ 1 files changed, 13 insertions(+), 0 deletions(-)