@@ -39,7 +39,7 @@
#define c6_IFAR 17 /* Instruction Fault Address Register */
#define c7_PAR 18 /* Physical Address Register */
#define c7_PAR_high 19 /* PAR top 32 bits */
-#define c9_L2CTLR 20 /* Cortex A15 L2 Control Register */
+#define c9_L2CTLR 20 /* Cortex A15/A7 L2 Control Register */
#define c10_PRRR 21 /* Primary Region Remap Register */
#define c10_NMRR 22 /* Normal Memory Remap Register */
#define c12_VBAR 23 /* Vector Base Address Register */
@@ -63,7 +63,8 @@ struct kvm_regs {
/* Supported Processor Types */
#define KVM_ARM_TARGET_CORTEX_A15 0
-#define KVM_ARM_NUM_TARGETS 1
+#define KVM_ARM_TARGET_CORTEX_A7 1
+#define KVM_ARM_NUM_TARGETS 2
/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
#define KVM_ARM_DEVICE_TYPE_SHIFT 0
@@ -19,6 +19,6 @@ kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o
obj-y += kvm-arm.o init.o interrupts.o
obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
-obj-y += coproc.o coproc_a15.o mmio.o psci.o perf.o
+obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o
obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o
@@ -71,6 +71,92 @@ int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 1;
}
+static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ /*
+ * Compute guest MPIDR. No need to mess around with different clusters
+ * but we read the 'U' bit from the underlying hardware directly.
+ */
+ vcpu->arch.cp15[c0_MPIDR] = (read_cpuid_mpidr() & MPIDR_SMP_BITMASK)
+ | vcpu->vcpu_id;
+}
+
+/* TRM entries A7:4.3.31 A15:4.3.28 - RO WI */
+static bool access_actlr(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
+ return true;
+}
+
+/* TRM entries A7:4.3.56, A15:4.3.60 - R/O. */
+static bool access_cbar(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return write_to_read_only(vcpu, p);
+ return read_zero(vcpu, p);
+}
+
+/* TRM entries A7:4.3.49, A15:4.3.48 - R/O WI */
+static bool access_l2ctlr(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
+ return true;
+}
+
+static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ u32 l2ctlr, ncores;
+
+ asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
+ l2ctlr &= ~(3 << 24);
+ ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1;
+ l2ctlr |= (ncores & 3) << 24;
+
+ vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
+}
+
+static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
+{
+ u32 actlr;
+
+ /* ACTLR contains SMP bit: make sure you create all cpus first! */
+ asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+ /* Make the SMP bit consistent with the guest configuration */
+ if (atomic_read(&vcpu->kvm->online_vcpus) > 1)
+ actlr |= 1U << 6;
+ else
+ actlr &= ~(1U << 6);
+
+ vcpu->arch.cp15[c1_ACTLR] = actlr;
+}
+
+/*
+ * TRM entries: A7:4.3.50, A15:4.3.49
+ * R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored).
+ */
+static bool access_l2ectlr(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = 0;
+ return true;
+}
+
/* See note at ARM ARM B1.14.4 */
static bool access_dcsw(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
@@ -153,10 +239,22 @@ static bool pm_fake(struct kvm_vcpu *vcpu,
* registers preceding 32-bit ones.
*/
static const struct coproc_reg cp15_regs[] = {
+ /* MPIDR: we use VMPIDR for guest access. */
+ { CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32,
+ NULL, reset_mpidr, c0_MPIDR },
+
/* CSSELR: swapped by interrupt.S. */
{ CRn( 0), CRm( 0), Op1( 2), Op2( 0), is32,
NULL, reset_unknown, c0_CSSELR },
+ /* ACTLR: trapped by HCR.TAC bit. */
+ { CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32,
+ access_actlr, reset_actlr, c1_ACTLR },
+
+ /* CPACR: swapped by interrupt.S. */
+ { CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
+ NULL, reset_val, c1_CPACR, 0x00000000 },
+
/* TTBR0/TTBR1: swapped by interrupt.S. */
{ CRm64( 2), Op1( 0), is64, NULL, reset_unknown64, c2_TTBR0 },
{ CRm64( 2), Op1( 1), is64, NULL, reset_unknown64, c2_TTBR1 },
@@ -195,6 +293,13 @@ static const struct coproc_reg cp15_regs[] = {
{ CRn( 7), CRm(10), Op1( 0), Op2( 2), is32, access_dcsw},
{ CRn( 7), CRm(14), Op1( 0), Op2( 2), is32, access_dcsw},
/*
+ * L2CTLR access (guest wants to know #CPUs).
+ */
+ { CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32,
+ access_l2ctlr, reset_l2ctlr, c9_L2CTLR },
+ { CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr},
+
+ /*
* Dummy performance monitor implementation.
*/
{ CRn( 9), CRm(12), Op1( 0), Op2( 0), is32, access_pmcr},
@@ -234,6 +339,9 @@ static const struct coproc_reg cp15_regs[] = {
/* CNTKCTL: swapped by interrupt.S. */
{ CRn(14), CRm( 1), Op1( 0), Op2( 0), is32,
NULL, reset_val, c14_CNTKCTL, 0x00000000 },
+
+ /* The Configuration Base Address Register. */
+ { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
};
/* Target specific emulation tables */
@@ -241,6 +349,12 @@ static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS];
void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table)
{
+ unsigned int i;
+
+ for (i = 1; i < table->num; i++)
+ BUG_ON(cmp_reg(&table->table[i-1],
+ &table->table[i]) >= 0);
+
target_tables[table->target] = table;
}
@@ -17,98 +17,12 @@
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/kvm_host.h>
-#include <asm/cputype.h>
-#include <asm/kvm_arm.h>
-#include <asm/kvm_host.h>
-#include <asm/kvm_emulate.h>
#include <asm/kvm_coproc.h>
+#include <asm/kvm_emulate.h>
#include <linux/init.h>
-static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
-{
- /*
- * Compute guest MPIDR. No need to mess around with different clusters
- * but we read the 'U' bit from the underlying hardware directly.
- */
- vcpu->arch.cp15[c0_MPIDR] = (read_cpuid_mpidr() & MPIDR_SMP_BITMASK)
- | vcpu->vcpu_id;
-}
-
#include "coproc.h"
-/* A15 TRM 4.3.28: RO WI */
-static bool access_actlr(struct kvm_vcpu *vcpu,
- const struct coproc_params *p,
- const struct coproc_reg *r)
-{
- if (p->is_write)
- return ignore_write(vcpu, p);
-
- *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
- return true;
-}
-
-/* A15 TRM 4.3.60: R/O. */
-static bool access_cbar(struct kvm_vcpu *vcpu,
- const struct coproc_params *p,
- const struct coproc_reg *r)
-{
- if (p->is_write)
- return write_to_read_only(vcpu, p);
- return read_zero(vcpu, p);
-}
-
-/* A15 TRM 4.3.48: R/O WI. */
-static bool access_l2ctlr(struct kvm_vcpu *vcpu,
- const struct coproc_params *p,
- const struct coproc_reg *r)
-{
- if (p->is_write)
- return ignore_write(vcpu, p);
-
- *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
- return true;
-}
-
-static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
-{
- u32 l2ctlr, ncores;
-
- asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
- l2ctlr &= ~(3 << 24);
- ncores = atomic_read(&vcpu->kvm->online_vcpus) - 1;
- l2ctlr |= (ncores & 3) << 24;
-
- vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
-}
-
-static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
-{
- u32 actlr;
-
- /* ACTLR contains SMP bit: make sure you create all cpus first! */
- asm volatile("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
- /* Make the SMP bit consistent with the guest configuration */
- if (atomic_read(&vcpu->kvm->online_vcpus) > 1)
- actlr |= 1U << 6;
- else
- actlr &= ~(1U << 6);
-
- vcpu->arch.cp15[c1_ACTLR] = actlr;
-}
-
-/* A15 TRM 4.3.49: R/O WI (even if NSACR.NS_L2ERR, a write of 1 is ignored). */
-static bool access_l2ectlr(struct kvm_vcpu *vcpu,
- const struct coproc_params *p,
- const struct coproc_reg *r)
-{
- if (p->is_write)
- return ignore_write(vcpu, p);
-
- *vcpu_reg(vcpu, p->Rt1) = 0;
- return true;
-}
-
/*
* A15-specific CP15 registers.
* CRn denotes the primary register number, but is copied to the CRm in the
@@ -118,29 +32,9 @@ static bool access_l2ectlr(struct kvm_vcpu *vcpu,
* registers preceding 32-bit ones.
*/
static const struct coproc_reg a15_regs[] = {
- /* MPIDR: we use VMPIDR for guest access. */
- { CRn( 0), CRm( 0), Op1( 0), Op2( 5), is32,
- NULL, reset_mpidr, c0_MPIDR },
-
/* SCTLR: swapped by interrupt.S. */
{ CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
NULL, reset_val, c1_SCTLR, 0x00C50078 },
- /* ACTLR: trapped by HCR.TAC bit. */
- { CRn( 1), CRm( 0), Op1( 0), Op2( 1), is32,
- access_actlr, reset_actlr, c1_ACTLR },
- /* CPACR: swapped by interrupt.S. */
- { CRn( 1), CRm( 0), Op1( 0), Op2( 2), is32,
- NULL, reset_val, c1_CPACR, 0x00000000 },
-
- /*
- * L2CTLR access (guest wants to know #CPUs).
- */
- { CRn( 9), CRm( 0), Op1( 1), Op2( 2), is32,
- access_l2ctlr, reset_l2ctlr, c9_L2CTLR },
- { CRn( 9), CRm( 0), Op1( 1), Op2( 3), is32, access_l2ectlr},
-
- /* The Configuration Base Address Register. */
- { CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
};
static struct kvm_coproc_target_table a15_target_table = {
@@ -151,12 +45,6 @@ static struct kvm_coproc_target_table a15_target_table = {
static int __init coproc_a15_init(void)
{
- unsigned int i;
-
- for (i = 1; i < ARRAY_SIZE(a15_regs); i++)
- BUG_ON(cmp_reg(&a15_regs[i-1],
- &a15_regs[i]) >= 0);
-
kvm_register_target_coproc_table(&a15_target_table);
return 0;
}
new file mode 100644
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Copyright (C) 2013 - ARM Ltd
+ *
+ * Authors: Rusty Russell <rusty@rustcorp.au>
+ * Christoffer Dall <c.dall@virtualopensystems.com>
+ * Jonathan Austin <jonathan.austin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+#include <linux/kvm_host.h>
+#include <asm/kvm_coproc.h>
+#include <asm/kvm_emulate.h>
+#include <linux/init.h>
+
+#include "coproc.h"
+
+/*
+ * Cortex-A7 specific CP15 registers.
+ * CRn denotes the primary register number, but is copied to the CRm in the
+ * user space API for 64-bit register access in line with the terminology used
+ * in the ARM ARM.
+ * Important: Must be sorted ascending by CRn, CRM, Op1, Op2 and with 64-bit
+ * registers preceding 32-bit ones.
+ */
+static const struct coproc_reg a7_regs[] = {
+ /* SCTLR: swapped by interrupt.S. */
+ { CRn( 1), CRm( 0), Op1( 0), Op2( 0), is32,
+ NULL, reset_val, c1_SCTLR, 0x00C50878 },
+};
+
+static struct kvm_coproc_target_table a7_target_table = {
+ .target = KVM_ARM_TARGET_CORTEX_A7,
+ .table = a7_regs,
+ .num = ARRAY_SIZE(a7_regs),
+};
+
+static int __init coproc_a7_init(void)
+{
+ kvm_register_target_coproc_table(&a7_target_table);
+ return 0;
+}
+late_initcall(coproc_a7_init);
@@ -190,6 +190,8 @@ int __attribute_const__ kvm_target_cpu(void)
return -EINVAL;
switch (part_number) {
+ case ARM_CPU_PART_CORTEX_A7:
+ return KVM_ARM_TARGET_CORTEX_A7;
case ARM_CPU_PART_CORTEX_A15:
return KVM_ARM_TARGET_CORTEX_A15;
default:
@@ -202,7 +204,7 @@ int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
{
unsigned int i;
- /* We can only do a cortex A15 for now. */
+ /* We can only cope with guest==host and only on A15/A7 (for now). */
if (init->target != kvm_target_cpu())
return -EINVAL;
@@ -30,16 +30,16 @@
#include <kvm/arm_arch_timer.h>
/******************************************************************************
- * Cortex-A15 Reset Values
+ * Cortex-A15 and Cortex-A7 Reset Values
*/
-static const int a15_max_cpu_idx = 3;
+static const int cortexa_max_cpu_idx = 3;
-static struct kvm_regs a15_regs_reset = {
+static struct kvm_regs cortexa_regs_reset = {
.usr_regs.ARM_cpsr = SVC_MODE | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT,
};
-static const struct kvm_irq_level a15_vtimer_irq = {
+static const struct kvm_irq_level cortexa_vtimer_irq = {
{ .irq = 27 },
.level = 1,
};
@@ -62,12 +62,13 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
const struct kvm_irq_level *cpu_vtimer_irq;
switch (vcpu->arch.target) {
+ case KVM_ARM_TARGET_CORTEX_A7:
case KVM_ARM_TARGET_CORTEX_A15:
- if (vcpu->vcpu_id > a15_max_cpu_idx)
+ if (vcpu->vcpu_id > cortexa_max_cpu_idx)
return -EINVAL;
- cpu_reset = &a15_regs_reset;
+ cpu_reset = &cortexa_regs_reset;
vcpu->arch.midr = read_cpuid_id();
- cpu_vtimer_irq = &a15_vtimer_irq;
+ cpu_vtimer_irq = &cortexa_vtimer_irq;
break;
default:
return -ENODEV;