| Message ID | 1381917376-21107-4-git-send-email-jhovold@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 16/10/2013 11:56, Johan Hovold : > Make sure RTC-interrupts are disabled at shutdown. > > As the RTC is generally powered by backup power (VDDBU), its interrupts > are not disabled on wake-up, user, watchdog or software reset. This > could cause troubles on other systems (e.g. older kernels) if an > interrupt occurs before a handler has been installed at next boot. > > Let us be well-behaved and disable them on clean shutdowns at least (as > do the RTT-based rtc-at91sam9 driver). > > Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Thank you Johan. Andrew, could you add this patch to your rtc queue or should I re-send it ? Best regards, > --- > drivers/rtc/rtc-at91rm9200.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c > index 7418926..ea088e9 100644 > --- a/drivers/rtc/rtc-at91rm9200.c > +++ b/drivers/rtc/rtc-at91rm9200.c > @@ -442,6 +442,14 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) > return 0; > } > > +static void at91_rtc_shutdown(struct platform_device *pdev) > +{ > + /* Disable all interrupts */ > + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | > + AT91_RTC_SECEV | AT91_RTC_TIMEV | > + AT91_RTC_CALEV); > +} > + > #ifdef CONFIG_PM_SLEEP > > /* AT91RM9200 RTC Power management control */ > @@ -480,6 +488,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); > > static struct platform_driver at91_rtc_driver = { > .remove = __exit_p(at91_rtc_remove), > + .shutdown = at91_rtc_shutdown, > .driver = { > .name = "at91_rtc", > .owner = THIS_MODULE, >
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 7418926..ea088e9 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -442,6 +442,14 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) return 0; } +static void at91_rtc_shutdown(struct platform_device *pdev) +{ + /* Disable all interrupts */ + at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | + AT91_RTC_SECEV | AT91_RTC_TIMEV | + AT91_RTC_CALEV); +} + #ifdef CONFIG_PM_SLEEP /* AT91RM9200 RTC Power management control */ @@ -480,6 +488,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); static struct platform_driver at91_rtc_driver = { .remove = __exit_p(at91_rtc_remove), + .shutdown = at91_rtc_shutdown, .driver = { .name = "at91_rtc", .owner = THIS_MODULE,
Make sure RTC-interrupts are disabled at shutdown. As the RTC is generally powered by backup power (VDDBU), its interrupts are not disabled on wake-up, user, watchdog or software reset. This could cause troubles on other systems (e.g. older kernels) if an interrupt occurs before a handler has been installed at next boot. Let us be well-behaved and disable them on clean shutdowns at least (as do the RTT-based rtc-at91sam9 driver). Signed-off-by: Johan Hovold <jhovold@gmail.com> --- drivers/rtc/rtc-at91rm9200.c | 9 +++++++++ 1 file changed, 9 insertions(+)