@@ -236,7 +236,24 @@
status = "disabled";
};
- usbphy@12100000 {
+ usb@12000000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock 366>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "synopsys,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usb3_phy0>;
+ phy-names = "usb3-phy";
+ };
+ };
+
+ usb3_phy0: usbphy@12100000 {
compatible = "samsung,exynos5420-usb3phy";
reg = <0x12100000 0x100 0x10040704 0x4>;
clocks = <&clock 366>, <&clock 1>, <&clock 152>;
@@ -244,7 +261,24 @@
#phy-cells = <0>;
};
- usbphy@12500000 {
+ usb@12400000 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock 367>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dwc3 {
+ compatible = "synopsys,dwc3";
+ reg = <0x12400000 0x10000>;
+ interrupts = <0 73 0>;
+ phys = <&usb3_phy1>;
+ phy-names = "usb3-phy";
+ };
+ };
+
+ usb3_phy1: usbphy@12500000 {
compatible = "samsung,exynos5420-usb3phy";
reg = <0x12500000 0x100 0x10040708 0x4>;
clocks = <&clock 367>, <&clock 1>, <&clock 153>;
Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> --- arch/arm/boot/dts/exynos5420.dtsi | 38 +++++++++++++++++++++++++++++++++++- 1 files changed, 36 insertions(+), 2 deletions(-)