| Message ID | 1386250086-4666-1-git-send-email-denis@eukrea.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 05, 2013 at 02:28:04PM +0100, Denis Carikli wrote: > Cc: Rob Herring <rob.herring@calxeda.com> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: Shawn Guo <shawn.guo@linaro.org> > Cc: Eric Bénard <eric@eukrea.com> > Signed-off-by: Denis Carikli <denis@eukrea.com> Applied #1 and #2. Shawn > --- > arch/arm/boot/dts/imx28.dtsi | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index 51ff335..93a7e79 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -668,6 +668,33 @@ > fsl,pull-up = <MXS_PULL_DISABLE>; > }; > > + lcdif_18bit_pins_a: lcdif-18bit@0 { > + reg = <0>; > + fsl,pinmux-ids = < > + MX28_PAD_LCD_D00__LCD_D0 > + MX28_PAD_LCD_D01__LCD_D1 > + MX28_PAD_LCD_D02__LCD_D2 > + MX28_PAD_LCD_D03__LCD_D3 > + MX28_PAD_LCD_D04__LCD_D4 > + MX28_PAD_LCD_D05__LCD_D5 > + MX28_PAD_LCD_D06__LCD_D6 > + MX28_PAD_LCD_D07__LCD_D7 > + MX28_PAD_LCD_D08__LCD_D8 > + MX28_PAD_LCD_D09__LCD_D9 > + MX28_PAD_LCD_D10__LCD_D10 > + MX28_PAD_LCD_D11__LCD_D11 > + MX28_PAD_LCD_D12__LCD_D12 > + MX28_PAD_LCD_D13__LCD_D13 > + MX28_PAD_LCD_D14__LCD_D14 > + MX28_PAD_LCD_D15__LCD_D15 > + MX28_PAD_LCD_D16__LCD_D16 > + MX28_PAD_LCD_D17__LCD_D17 > + >; > + fsl,drive-strength = <MXS_DRIVE_4mA>; > + fsl,voltage = <MXS_VOLTAGE_HIGH>; > + fsl,pull-up = <MXS_PULL_DISABLE>; > + }; > + > lcdif_16bit_pins_a: lcdif-16bit@0 { > reg = <0>; > fsl,pinmux-ids = < > -- > 1.7.9.5 >
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 51ff335..93a7e79 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -668,6 +668,33 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + lcdif_18bit_pins_a: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + lcdif_16bit_pins_a: lcdif-16bit@0 { reg = <0>; fsl,pinmux-ids = <
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> --- arch/arm/boot/dts/imx28.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)