@@ -31,6 +31,10 @@
#define HW_USBPHY_CTRL_SET 0x34
#define HW_USBPHY_CTRL_CLR 0x38
+#define HW_USBPHY_IP 0x90
+#define HW_USBPHY_IP_SET 0x94
+#define HW_USBPHY_IP_CLR 0x98
+
#define BM_USBPHY_CTRL_SFTRST BIT(31)
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
@@ -42,6 +46,8 @@
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
+#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
+
#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
/* Do disconnection between PHY and controller without vbus */
@@ -63,6 +69,14 @@
/* The SoCs who have anatop module */
#define MXS_PHY_HAS_ANATOP BIT(3)
+/*
+ * IC has bug fixes logic, they include
+ * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
+ * which are described at above flags, the RTL will handle it
+ * according to different versions.
+ */
+#define MXS_PHY_NEED_IP_FIX BIT(4)
+
struct mxs_phy_data {
unsigned int flags;
};
@@ -74,12 +88,14 @@ static const struct mxs_phy_data imx23_phy_data = {
static const struct mxs_phy_data imx6q_phy_data = {
.flags = MXS_PHY_SENDING_SOF_TOO_FAST |
MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
- MXS_PHY_HAS_ANATOP,
+ MXS_PHY_HAS_ANATOP |
+ MXS_PHY_NEED_IP_FIX,
};
static const struct mxs_phy_data imx6sl_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
- MXS_PHY_HAS_ANATOP,
+ MXS_PHY_HAS_ANATOP |
+ MXS_PHY_NEED_IP_FIX,
};
static const struct of_device_id mxs_phy_dt_ids[] = {
@@ -123,6 +139,9 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
BM_USBPHY_CTRL_ENUTMILEVEL3,
base + HW_USBPHY_CTRL_SET);
+ if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
+ writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
return 0;
}
Two PHY bugs are fixed by IC logic, but these bits are not enabled by default, so we enable them at driver. The two bugs are: MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST which are described at code. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- drivers/usb/phy/phy-mxs-usb.c | 23 +++++++++++++++++++++-- 1 files changed, 21 insertions(+), 2 deletions(-)