Message ID | 1386897825-6130-3-git-send-email-peter.chen@freescale.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Dec 13, 2013 at 09:23:32AM +0800, Peter Chen wrote: > The mxs-phy has several bugs and features at different > versions, the driver code can get it through of_device_id.data. > > Signed-off-by: Peter Chen <peter.chen@freescale.com> > --- > drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ > 1 files changed, 49 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > index 545844b..6d49040 100644 > --- a/drivers/usb/phy/phy-mxs-usb.c > +++ b/drivers/usb/phy/phy-mxs-usb.c > @@ -1,5 +1,5 @@ > /* > - * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > * Copyright (C) 2012 Marek Vasut <marex@denx.de> > * on behalf of DENX Software Engineering GmbH > * > @@ -20,6 +20,7 @@ > #include <linux/delay.h> > #include <linux/err.h> > #include <linux/io.h> > +#include <linux/of_device.h> > > #define DRIVER_NAME "mxs_phy" > > @@ -34,13 +35,55 @@ > #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) > #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) > > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) defined, but never used.
On Thu, Dec 12, 2013 at 10:19:19PM -0600, Felipe Balbi wrote: > On Fri, Dec 13, 2013 at 09:23:32AM +0800, Peter Chen wrote: > > The mxs-phy has several bugs and features at different > > versions, the driver code can get it through of_device_id.data. > > > > Signed-off-by: Peter Chen <peter.chen@freescale.com> > > --- > > drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ > > 1 files changed, 49 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c > > index 545844b..6d49040 100644 > > --- a/drivers/usb/phy/phy-mxs-usb.c > > +++ b/drivers/usb/phy/phy-mxs-usb.c > > @@ -1,5 +1,5 @@ > > /* > > - * Copyright 2012 Freescale Semiconductor, Inc. > > + * Copyright 2012-2013 Freescale Semiconductor, Inc. > > * Copyright (C) 2012 Marek Vasut <marex@denx.de> > > * on behalf of DENX Software Engineering GmbH > > * > > @@ -20,6 +20,7 @@ > > #include <linux/delay.h> > > #include <linux/err.h> > > #include <linux/io.h> > > +#include <linux/of_device.h> > > > > #define DRIVER_NAME "mxs_phy" > > > > @@ -34,13 +35,55 @@ > > #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) > > #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) > > > > +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) > > defined, but never used. > At current code, this define is after definition of struct mxs_phy, I think the lines of #define should be at the same place, so I move it up.
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 545844b..6d49040 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -1,5 +1,5 @@ /* - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012-2013 Freescale Semiconductor, Inc. * Copyright (C) 2012 Marek Vasut <marex@denx.de> * on behalf of DENX Software Engineering GmbH * @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_device.h> #define DRIVER_NAME "mxs_phy" @@ -34,13 +35,55 @@ #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +/* Do disconnection between PHY and controller without vbus */ +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) + +/* + * The PHY will be in messy if there is a wakeup after putting + * bus to suspend (set portsc.suspendM) but before setting PHY to low + * power mode (set portsc.phcd). + */ +#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1) + +/* + * The SOF sends too fast after resuming, it will cause disconnection + * between host and high speed device. + */ +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) + +struct mxs_phy_data { + unsigned int flags; +}; + +static const struct mxs_phy_data imx23_phy_data = { + .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, +}; + +static const struct mxs_phy_data imx6q_phy_data = { + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + +static const struct mxs_phy_data imx6sl_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, +}; + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + struct mxs_phy { struct usb_phy phy; struct clk *clk; + const struct mxs_phy_data *data; }; -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) - static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; @@ -131,6 +174,8 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; + const struct of_device_id *of_id = + of_match_device(mxs_phy_dt_ids, &pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -163,6 +208,7 @@ static int mxs_phy_probe(struct platform_device *pdev) ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); mxs_phy->clk = clk; + mxs_phy->data = of_id->data; platform_set_drvdata(pdev, mxs_phy); @@ -182,12 +228,6 @@ static int mxs_phy_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mxs_phy_dt_ids[] = { - { .compatible = "fsl,imx23-usbphy", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); - static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, .remove = mxs_phy_remove,
The mxs-phy has several bugs and features at different versions, the driver code can get it through of_device_id.data. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- drivers/usb/phy/phy-mxs-usb.c | 58 ++++++++++++++++++++++++++++++++++------ 1 files changed, 49 insertions(+), 9 deletions(-)