@@ -14,6 +14,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
@@ -127,6 +128,23 @@ static struct irq_chip sa1100_low_gpio_chip = {
.irq_set_wake = sa1100_low_gpio_wake,
};
+static int sa1100_low_gpio_irqdomain_map(struct irq_domain *d,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops sa1100_low_gpio_irqdomain_ops = {
+ .map = sa1100_low_gpio_irqdomain_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_low_gpio_irqdomain;
+
/*
* IRQ11 (GPIO11 through 27) handler. We enter here with the
* irq_controller_lock held, and IRQs disabled. Decode the IRQ
@@ -216,6 +234,23 @@ static struct irq_chip sa1100_high_gpio_chip = {
.irq_set_wake = sa1100_high_gpio_wake,
};
+static int sa1100_high_gpio_irqdomain_map(struct irq_domain *d,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops sa1100_high_gpio_irqdomain_ops = {
+ .map = sa1100_high_gpio_irqdomain_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_high_gpio_irqdomain;
+
/*
* We don't need to ACK IRQs on the SA1100 unless they're GPIOs
* this is for internal IRQs i.e. from 11 to 31.
@@ -250,6 +285,23 @@ static struct irq_chip sa1100_normal_chip = {
.irq_set_wake = sa1100_set_wake,
};
+static int sa1100_normal_irqdomain_map(struct irq_domain *d,
+ unsigned int irq, irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &sa1100_normal_chip,
+ handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+
+ return 0;
+}
+
+static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
+ .map = sa1100_normal_irqdomain_map,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static struct irq_domain *sa1100_normal_irqdomain;
+
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
@@ -343,8 +395,6 @@ sa1100_handle_irq(struct pt_regs *regs)
void __init sa1100_init_irq(void)
{
- unsigned int irq;
-
request_resource(&iomem_resource, &irq_resource);
request_resource(&iomem_resource, &gpio_resource);
@@ -379,23 +429,17 @@ void __init sa1100_init_irq(void)
*/
writel_relaxed(1, irq_regbase + ICCR_OFFSET);
- for (irq = 0; irq <= 10; irq++) {
- irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
+ sa1100_low_gpio_irqdomain = irq_domain_add_legacy(NULL,
+ 11, 0, 0,
+ &sa1100_low_gpio_irqdomain_ops, NULL);
- for (irq = 12; irq <= 31; irq++) {
- irq_set_chip_and_handler(irq, &sa1100_normal_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
+ sa1100_normal_irqdomain = irq_domain_add_legacy(NULL,
+ 20, 12, 12,
+ &sa1100_normal_irqdomain_ops, NULL);
- for (irq = 32; irq <= 48; irq++) {
- irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
+ sa1100_high_gpio_irqdomain = irq_domain_add_legacy(NULL,
+ 17, 32, 11,
+ &sa1100_high_gpio_irqdomain_ops, NULL);
/*
* Install handler for GPIO 11-27 edge detect interrupts
Use irqdomains to manage both system and GPIO interrupts on SA1100 SoC family. This opens path to further cleanup and unification in sa1100 IRQ drivers. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> --- arch/arm/mach-sa1100/irq.c | 78 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 61 insertions(+), 17 deletions(-)