| Message ID | 1387242783-1462-8-git-send-email-troy.kisky@boundarydevices.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index ee3f5c0..29f0b40 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -114,7 +114,8 @@ imx6q-sabrelite { pinctrl_hog: hoggrp { fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000 + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 >; };
Explicitly sets the pad GPIO_0 (sys_mclk) to 0x030b0. Before this patch, it has the value 0x130b0 if using mainline u-boot. So this patch also removes hysteresis. The 100k pulldown remains so that a disabled clock will be low. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> --- v2: New patch.. V1 patch to add comments was broken up into multiple patches --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)