| Message ID | 1387296973-7779-1-git-send-email-b.brezillon@overkiz.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 17/12/2013 17:16, Boris BREZILLON : > Document the clock properties required by the at91 ADC driver. > > Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > .../devicetree/bindings/arm/atmel-adc.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt > index d106146..9a1175b 100644 > --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt > +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt > @@ -5,6 +5,9 @@ Required properties: > <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" > - reg: Should contain ADC registers location and length > - interrupts: Should contain the IRQ line for the ADC > + - clock-names: tuple listing input clock names. > + Required elements: "adc_clk", "adc_op_clk". > + - clocks: phandles to input clocks. > - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this > device > - atmel,adc-startup-time: Startup Time of the ADC in microseconds as > @@ -44,6 +47,8 @@ adc0: adc@fffb0000 { > compatible = "atmel,at91sam9260-adc"; > reg = <0xfffb0000 0x100>; > interrupts = <20 4>; > + clocks = <&adc_clk>, <&adc_op_clk>; > + clock-names = "adc_clk", "adc_op_clk"; > atmel,adc-channel-base = <0x30>; > atmel,adc-channels-used = <0xff>; > atmel,adc-drdy-mask = <0x10000>; >
On 12/19/13 15:54, Nicolas Ferre wrote: > On 17/12/2013 17:16, Boris BREZILLON : >> Document the clock properties required by the at91 ADC driver. >> >> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> > > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Looks fine to me. I'm just waiting on an ack from a device tree maintainer (or the 3 weeks to pass so I can pick it up anyway ;) > >> --- >> .../devicetree/bindings/arm/atmel-adc.txt | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt >> index d106146..9a1175b 100644 >> --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt >> +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt >> @@ -5,6 +5,9 @@ Required properties: >> <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" >> - reg: Should contain ADC registers location and length >> - interrupts: Should contain the IRQ line for the ADC >> + - clock-names: tuple listing input clock names. >> + Required elements: "adc_clk", "adc_op_clk". >> + - clocks: phandles to input clocks. >> - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this >> device >> - atmel,adc-startup-time: Startup Time of the ADC in microseconds as >> @@ -44,6 +47,8 @@ adc0: adc@fffb0000 { >> compatible = "atmel,at91sam9260-adc"; >> reg = <0xfffb0000 0x100>; >> interrupts = <20 4>; >> + clocks = <&adc_clk>, <&adc_op_clk>; >> + clock-names = "adc_clk", "adc_op_clk"; >> atmel,adc-channel-base = <0x30>; >> atmel,adc-channels-used = <0xff>; >> atmel,adc-drdy-mask = <0x10000>; >> > >
On 22/12/13 18:05, Jonathan Cameron wrote: > On 12/19/13 15:54, Nicolas Ferre wrote: >> On 17/12/2013 17:16, Boris BREZILLON : >>> Document the clock properties required by the at91 ADC driver. >>> >>> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> >> >> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > Looks fine to me. I'm just waiting on an ack from a device tree maintainer > (or the 3 weeks to pass so I can pick it up anyway ;) That's near enough 3 weeks (one day short) so applied to the togreg branch of iio.git. Thanks > >> >>> --- >>> .../devicetree/bindings/arm/atmel-adc.txt | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt >>> index d106146..9a1175b 100644 >>> --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt >>> +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt >>> @@ -5,6 +5,9 @@ Required properties: >>> <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" >>> - reg: Should contain ADC registers location and length >>> - interrupts: Should contain the IRQ line for the ADC >>> + - clock-names: tuple listing input clock names. >>> + Required elements: "adc_clk", "adc_op_clk". >>> + - clocks: phandles to input clocks. >>> - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this >>> device >>> - atmel,adc-startup-time: Startup Time of the ADC in microseconds as >>> @@ -44,6 +47,8 @@ adc0: adc@fffb0000 { >>> compatible = "atmel,at91sam9260-adc"; >>> reg = <0xfffb0000 0x100>; >>> interrupts = <20 4>; >>> + clocks = <&adc_clk>, <&adc_op_clk>; >>> + clock-names = "adc_clk", "adc_op_clk"; >>> atmel,adc-channel-base = <0x30>; >>> atmel,adc-channels-used = <0xff>; >>> atmel,adc-drdy-mask = <0x10000>; >>> >> >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt index d106146..9a1175b 100644 --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt @@ -5,6 +5,9 @@ Required properties: <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" - reg: Should contain ADC registers location and length - interrupts: Should contain the IRQ line for the ADC + - clock-names: tuple listing input clock names. + Required elements: "adc_clk", "adc_op_clk". + - clocks: phandles to input clocks. - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this device - atmel,adc-startup-time: Startup Time of the ADC in microseconds as @@ -44,6 +47,8 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 4>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channel-base = <0x30>; atmel,adc-channels-used = <0xff>; atmel,adc-drdy-mask = <0x10000>;
Document the clock properties required by the at91 ADC driver. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> --- .../devicetree/bindings/arm/atmel-adc.txt | 5 +++++ 1 file changed, 5 insertions(+)