diff mbox

[v3,3/3] ARM: dts: sama5d3xcm: add the regulator device node

Message ID 1387344301-19843-1-git-send-email-wenyou.yang@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Wenyou Yang Dec. 18, 2013, 5:25 a.m. UTC 
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
 arch/arm/boot/dts/sama5d3xcm.dtsi |   46 +++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

Comments

Mark Brown Dec. 18, 2013, 11:32 a.m. UTC | #1 
On Wed, Dec 18, 2013 at 01:25:01PM +0800, Wenyou Yang wrote:
> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>

Reviwed-by: Mark Brown <broonie@linaro.org>

I can't see the bindings changing.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 726a0f3..4571751 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -38,6 +38,52 @@ 
 			macb0: ethernet@f0028000 {
 				phy-mode = "rgmii";
 			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-suspend-mem-microvolt = <1150000>;
+							regulator-suspend-standby-microvolt = <1150000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
 		};
 
 		nand0: nand@60000000 {