From patchwork Wed Dec 18 21:32:01 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wolfram Sang X-Patchwork-Id: 3372891 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 63071C0D4A for ; Wed, 18 Dec 2013 21:36:18 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 0F916202B4 for ; Wed, 18 Dec 2013 21:36:17 +0000 (UTC) Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5BA7E20453 for ; Wed, 18 Dec 2013 21:36:15 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VtOlH-0004Dz-1Q; Wed, 18 Dec 2013 21:34:36 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1VtOkq-0004As-0v; Wed, 18 Dec 2013 21:34:08 +0000 Received: from sauhun.de ([89.238.76.85] helo=pokefinder.org) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VtOjy-00044O-Vh for linux-arm-kernel@lists.infradead.org; Wed, 18 Dec 2013 21:33:18 +0000 Received: from p4fe2514a.dip0.t-ipconnect.de ([79.226.81.74]:50750 helo=localhost) by pokefinder.org with esmtpsa (TLS1.0:DHE_RSA_AES_128_CBC_SHA1:16) (Exim 4.69) (envelope-from ) id 1VtOjd-0002D9-JB; Wed, 18 Dec 2013 22:32:54 +0100 From: Wolfram Sang To: linux-sh@vger.kernel.org Subject: [PATCH V2 5/5] i2c: riic: add driver Date: Wed, 18 Dec 2013 22:32:01 +0100 Message-Id: <1387402321-21866-6-git-send-email-wsa@the-dreams.de> X-Mailer: git-send-email 1.8.4.2 In-Reply-To: <1387402321-21866-1-git-send-email-wsa@the-dreams.de> References: <1387402321-21866-1-git-send-email-wsa@the-dreams.de> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20131218_163315_420988_CDB0C102 X-CRM114-Status: GOOD ( 29.69 ) X-Spam-Score: -1.9 (-) Cc: Wolfram Sang , Magnus Damm , Simon Horman , linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Laurent Pinchart X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.7 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Wolfram Sang Tested with a r7s72100 genmai board acessing an eeprom. Signed-off-by: Wolfram Sang --- V2: fixed the name typo in the binding docs Documentation/devicetree/bindings/i2c/i2c-riic.txt | 29 ++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-riic.c | 426 +++++++++++++++++++++ 4 files changed, 466 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-riic.txt create mode 100644 drivers/i2c/busses/i2c-riic.c diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/i2c-riic.txt new file mode 100644 index 0000000..0bcc471 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-riic.txt @@ -0,0 +1,29 @@ +Device tree configuration for Renesas RIIC driver + +Required properties: +- compatible : "renesas,riic-". "renesas,riic-rz" as fallback +- reg : address start and address range size of device +- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI) +- clock-frequency : frequency of bus clock in Hz +- #address-cells : should be <1> +- #size-cells : should be <0> + +Pinctrl properties might be needed, too. See there. + +Example: + + i2c0: i2c@fcfee000 { + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, + <0 158 IRQ_TYPE_EDGE_RISING>, + <0 159 IRQ_TYPE_EDGE_RISING>, + <0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 164 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3b26129..8e8332d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -648,6 +648,16 @@ config I2C_PXA_SLAVE is necessary for systems where the PXA may be a target on the I2C bus. +config I2C_RIIC + tristate "Renesas RIIC adapter" + depends on ARCH_SHMOBILE || COMPILE_TEST + help + If you say yes to this option, support will be included for the + Renesas RIIC I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-riic. + config HAVE_S3C2410_I2C bool help diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index c73eb0e..dca041b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o +obj-$(CONFIG_I2C_RIIC) += i2c-riic.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c new file mode 100644 index 0000000..ae0df13 --- /dev/null +++ b/drivers/i2c/busses/i2c-riic.c @@ -0,0 +1,426 @@ +/* + * Renesas RIIC driver + * + * Copyright (C) 2013 Wolfram Sang + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * This i2c core has a lot of interrupts, namely 8. We use their chaining as + * some kind of state machine. + * + * 1) The main xfer routine kicks off a transmission by putting the start bit + * (or repeated start) on the bus and enabling the transmit interrupt (TIE) + * since we need to send the slave address + RW bit in every case. + * + * 2) TIE sends slave address + RW bit and selects how to continue. + * + * 3a) Write case: We keep utilizing TIE as long as we have data to send. If we + * are done, we switch over to the transmission done interrupt (TEIE) and mark + * the message as completed (includes sending STOP) there. + * + * 3b) Read case: We switch over to receive interrupt (RIE). One dummy read is + * needed to start clocking, then we keep receiving until we are done. Note + * that we use the RDRFS mode all the time, i.e. we ACK/NACK every byte by + * writing to the ACKBT bit. I tried using the RDRFS mode only at the end of a + * message to create the final NACK as sketched in the datasheet. This caused + * some subtle races (when byte n was processed and byte n+1 was already + * waiting), though, and I started with the safe approach. + * + * 4) If we got a NACK somewhere, we flag the error and stop the transmission + * via NAKIE. + * + * Also check the comments in the interrupt routines for some gory details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RIIC_ICCR1 0x00 +#define RIIC_ICCR2 0x04 +#define RIIC_ICMR1 0x08 +#define RIIC_ICMR3 0x10 +#define RIIC_ICSER 0x18 +#define RIIC_ICIER 0x1c +#define RIIC_ICSR2 0x24 +#define RIIC_ICBRL 0x34 +#define RIIC_ICBRH 0x38 +#define RIIC_ICDRT 0x3c +#define RIIC_ICDRR 0x40 + +#define ICCR1_ICE 0x80 +#define ICCR1_IICRST 0x40 +#define ICCR1_SOWP 0x10 + +#define ICCR2_BBSY 0x80 +#define ICCR2_SP 0x08 +#define ICCR2_RS 0x04 +#define ICCR2_ST 0x02 + +#define ICMR1_CKS_MASK 0x70 +#define ICMR1_BCWP 0x08 +#define ICMR1_CKS(_x) ((((_x) << 4) & ICMR1_CKS_MASK) | ICMR1_BCWP) + +#define ICMR3_RDRFS 0x20 +#define ICMR3_ACKWP 0x10 +#define ICMR3_ACKBT 0x08 + +#define ICIER_TIE 0x80 +#define ICIER_TEIE 0x40 +#define ICIER_RIE 0x20 +#define ICIER_NAKIE 0x10 + +#define ICSR2_NACKF 0x10 + +/* ICBRx (@ PCLK 33MHz) */ +#define ICBR_RESERVED 0xe0 /* Should be 1 on writes */ +#define ICBRL_SP100K (19 | ICBR_RESERVED) +#define ICBRH_SP100K (16 | ICBR_RESERVED) +#define ICBRL_SP400K (21 | ICBR_RESERVED) +#define ICBRH_SP400K (9 | ICBR_RESERVED) + +#define RIIC_INIT_MSG -1 + +struct riic_dev { + void __iomem *base; + u8 *buf; + struct i2c_msg *msg; + int bytes_left; + int err; + int is_last; + struct completion msg_done; + struct i2c_adapter adapter; + struct clk *clk; +}; + +struct riic_irq_desc { + int res_num; + irq_handler_t isr; + char *name; +}; + +static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u8 reg) +{ + writeb((readb(riic->base + reg) & ~clear) | set, riic->base + reg); +} + +static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + struct riic_dev *riic = i2c_get_adapdata(adap); + int i, ret; + u8 start_bit; + + ret = clk_prepare_enable(riic->clk); + if (ret) + return ret; + + if (readb(riic->base + RIIC_ICCR2) & ICCR2_BBSY) { + riic->err = -EBUSY; + goto out; + } + + reinit_completion(&riic->msg_done); + riic->err = 0; + + writeb(0, riic->base + RIIC_ICSR2); + + for (i = 0, start_bit = ICCR2_ST; i < num; i++) { + riic->bytes_left = RIIC_INIT_MSG; + riic->buf = msgs[i].buf; + riic->msg = &msgs[i]; + riic->is_last = (i == num - 1); + + writeb(ICIER_NAKIE | ICIER_TIE, riic->base + RIIC_ICIER); + + writeb(start_bit, riic->base + RIIC_ICCR2); + + ret = wait_for_completion_timeout(&riic->msg_done, riic->adapter.timeout); + if (ret == 0) + riic->err = -ETIMEDOUT; + + if (riic->err) + break; + + start_bit = ICCR2_RS; + } + + out: + clk_disable_unprepare(riic->clk); + + return riic->err ?: num; +} + +static irqreturn_t riic_tdre_isr(int irq, void *data) +{ + struct riic_dev *riic = data; + u8 val; + + if (!riic->bytes_left) + return IRQ_NONE; + + if (riic->bytes_left == RIIC_INIT_MSG) { + val = !!(riic->msg->flags & I2C_M_RD); + if (val) + /* On read, switch over to receive interrupt */ + riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER); + else + /* On write, initialize length */ + riic->bytes_left = riic->msg->len; + + val |= (riic->msg->addr << 1); + } else { + val = *riic->buf; + riic->buf++; + riic->bytes_left--; + } + + /* + * Switch to transmission ended interrupt when done. Do check here + * after bytes_left was initialized to support SMBUS_QUICK (new msg has + * 0 length then) + */ + if (riic->bytes_left == 0) + riic_clear_set_bit(riic, ICIER_TIE, ICIER_TEIE, RIIC_ICIER); + + /* + * This acks the TIE interrupt. We get another TIE immediately if our + * value could be moved to the shadow shift register right away. So + * this must be after updates to ICIER (where we want to disable TIE)! + */ + writeb(val, riic->base + RIIC_ICDRT); + + return IRQ_HANDLED; +} + +static irqreturn_t riic_tend_isr(int irq, void *data) +{ + struct riic_dev *riic = data; + + if (readb(riic->base + RIIC_ICSR2) & ICSR2_NACKF) { + /* We got a NACKIE */ + readb(riic->base + RIIC_ICDRR); /* dummy read */ + riic->err = -ENXIO; + } else if (riic->bytes_left) { + return IRQ_NONE; + } + + if (riic->is_last || riic->err) + writeb(ICCR2_SP, riic->base + RIIC_ICCR2); + + writeb(0, riic->base + RIIC_ICIER); + complete(&riic->msg_done); + + return IRQ_HANDLED; +} + +static irqreturn_t riic_rdrf_isr(int irq, void *data) +{ + struct riic_dev *riic = data; + + if (!riic->bytes_left) + return IRQ_NONE; + + if (riic->bytes_left == RIIC_INIT_MSG) { + riic->bytes_left = riic->msg->len; + readb(riic->base + RIIC_ICDRR); /* dummy read */ + return IRQ_HANDLED; + } + + if (riic->bytes_left == 1) { + /* STOP must come before we set ACKBT! */ + if (riic->is_last) + writeb(ICCR2_SP, riic->base + RIIC_ICCR2); + + riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3); + + writeb(0, riic->base + RIIC_ICIER); + complete(&riic->msg_done); + } else { + riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3); + } + + /* Reading acks the RIE interrupt */ + *riic->buf = readb(riic->base + RIIC_ICDRR); + riic->buf++; + riic->bytes_left--; + + return IRQ_HANDLED; +} + +static u32 riic_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm riic_algo = { + .master_xfer = riic_xfer, + .functionality = riic_func, +}; + +static int riic_init_hw(struct riic_dev *riic, u32 spd) +{ + int ret; + unsigned long rate; + + ret = clk_prepare_enable(riic->clk); + if (ret) + return ret; + + /* + * TODO: Implement formula to calculate the timing values depending on + * variable parent clock rate and arbitrary bus speed + */ + rate = clk_get_rate(riic->clk); + if (rate != 33325000) { + dev_err(&riic->adapter.dev, + "invalid parent clk (%lu). Must be 33325000Hz\n", rate); + clk_disable_unprepare(riic->clk); + return -EINVAL; + } + + /* Changing the order of accessing IICRST and ICE may break things! */ + writeb(ICCR1_IICRST | ICCR1_SOWP, riic->base + RIIC_ICCR1); + riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1); + + switch (spd) { + case 100000: + writeb(ICMR1_CKS(3), riic->base + RIIC_ICMR1); + writeb(ICBRH_SP100K, riic->base + RIIC_ICBRH); + writeb(ICBRL_SP100K, riic->base + RIIC_ICBRL); + break; + case 400000: + writeb(ICMR1_CKS(1), riic->base + RIIC_ICMR1); + writeb(ICBRH_SP400K, riic->base + RIIC_ICBRH); + writeb(ICBRL_SP400K, riic->base + RIIC_ICBRL); + break; + default: + dev_err(&riic->adapter.dev, + "unsupported bus speed (%dHz). Use 100000 or 400000\n", spd); + clk_disable_unprepare(riic->clk); + return -EINVAL; + } + + writeb(0, riic->base + RIIC_ICSER); + writeb(ICMR3_ACKWP | ICMR3_RDRFS, riic->base + RIIC_ICMR3); + + riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1); + + clk_disable_unprepare(riic->clk); + + return 0; +} + +static struct riic_irq_desc riic_irqs[] = { + { .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" }, + { .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" }, + { .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" }, + { .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" }, +}; + +static int riic_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct riic_dev *riic; + struct i2c_adapter *adap; + struct resource *res; + u32 bus_rate = 0; + int i, ret; + + riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL); + if (!riic) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + riic->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(riic->base)) + return PTR_ERR(riic->base); + + riic->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(riic->clk)) { + dev_err(&pdev->dev, "missing controller clock"); + return PTR_ERR(riic->clk); + } + + for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) { + res = platform_get_resource(pdev, IORESOURCE_IRQ, riic_irqs[i].res_num); + if (!res) + return -ENODEV; + + ret = devm_request_irq(&pdev->dev, res->start, riic_irqs[i].isr, + 0, riic_irqs[i].name, riic); + if (ret) { + dev_err(&pdev->dev, "failed to request irq %s\n", riic_irqs[i].name); + return ret; + } + } + + adap = &riic->adapter; + i2c_set_adapdata(adap, riic); + strlcpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name)); + adap->owner = THIS_MODULE; + adap->algo = &riic_algo; + adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; + + init_completion(&riic->msg_done); + + of_property_read_u32(np, "clock-frequency", &bus_rate); + ret = riic_init_hw(riic, bus_rate); + if (ret) + return ret; + + + ret = i2c_add_adapter(adap); + if (ret) { + dev_err(&pdev->dev, "failed to add adapter\n"); + return ret; + } + + platform_set_drvdata(pdev, riic); + + dev_info(&pdev->dev, "registered with %dHz bus speed\n", bus_rate); + return 0; +} + +static int riic_i2c_remove(struct platform_device *pdev) +{ + struct riic_dev *riic = platform_get_drvdata(pdev); + + writeb(0, riic->base + RIIC_ICIER); + i2c_del_adapter(&riic->adapter); + + return 0; +} + +static struct of_device_id riic_i2c_dt_ids[] = { + { .compatible = "renesas,riic-rz" }, + { /* Sentinel */ }, +}; + +static struct platform_driver riic_i2c_driver = { + .probe = riic_i2c_probe, + .remove = riic_i2c_remove, + .driver = { + .name = "i2c-riic", + .owner = THIS_MODULE, + .of_match_table = riic_i2c_dt_ids, + }, +}; + +module_platform_driver(riic_i2c_driver); + +MODULE_DESCRIPTION("Renesas RIIC adapter"); +MODULE_AUTHOR("Wolfram Sang "); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, riic_i2c_dt_ids);