| Message ID | 1387558125-3460-3-git-send-email-victor.kamensky@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Dec 20, 2013 at 08:48:42AM -0800, Victor Kamensky wrote: > ARM v7 KVM assembler files fixes to work in big endian mode: I don't think 'files fixes' is proper English, could be something like: Fix ARM v7 KVM assembler files to work... > > vgic h/w registers are little endian; when asm code reads/writes from/to the vgic h/w registers > them, it needs to do byteswap after/before. Byte swap code uses ARM_BE8 Byteswap > wrapper to add swap only if BIG_ENDIAN kernel is configured what is the config symbol, CONFIG_BIG_ENDIAN? > > mcrr and mrrc instructions take couple 32 bit registers as argument, one The mcrr and mrrc... a couple of as their arguments > is supposed to be high part of 64 bit value and another is low part of > 64 bit. Typically those values are loaded/stored with ldrd and strd one is supposed to be? > instructions and those will load high and low parts in opposite register > depending on endianity. Introduce and use rr_lo_hi macro that swap opposite register? This text is more confusing that clarifying, I think you need to explain what how the rr_lo_hi macro is intended to be used if anything. > registers in BE mode when they are passed to mcrr and mrrc instructions. > > function that returns 64 bit result __kvm_vcpu_run in couple registers > has to be adjusted for BE case. The __kvm_vcpu_run function returns a 64-bit result in two registers, which has... > > Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> > --- > arch/arm/include/asm/assembler.h | 7 +++++++ > arch/arm/include/asm/kvm_asm.h | 4 ++-- > arch/arm/kvm/init.S | 7 +++++-- > arch/arm/kvm/interrupts.S | 12 +++++++++--- > arch/arm/kvm/interrupts_head.S | 27 ++++++++++++++++++++------- > 5 files changed, 43 insertions(+), 14 deletions(-) > > diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h > index 5c22851..ad1ad31 100644 > --- a/arch/arm/include/asm/assembler.h > +++ b/arch/arm/include/asm/assembler.h > @@ -60,6 +60,13 @@ > #define ARM_BE8(code...) > #endif > > +/* swap pair of registers position depending on current endianity */ > +#ifdef CONFIG_CPU_ENDIAN_BE8 > +#define rr_lo_hi(a1, a2) a2, a1 > +#else > +#define rr_lo_hi(a1, a2) a1, a2 > +#endif > + I'm not convinced that this is needed generally in the kernel and not locally to KVM, but if it is, then I think it needs to be documented more. I assume the idea here is that a1 is always the lowered number register in an ldrd instruction loading the values to write to the register? > /* > * Data preload for architectures that support it > */ > diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h > index 661da11..12981d6 100644 > --- a/arch/arm/include/asm/kvm_asm.h > +++ b/arch/arm/include/asm/kvm_asm.h > @@ -26,9 +26,9 @@ > #define c1_ACTLR 4 /* Auxilliary Control Register */ > #define c1_CPACR 5 /* Coprocessor Access Control */ > #define c2_TTBR0 6 /* Translation Table Base Register 0 */ > -#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ > +#define c2_TTBR0_hilo 7 /* TTBR0 top 32 bits in LE case, low 32 bits in BE case */ > #define c2_TTBR1 8 /* Translation Table Base Register 1 */ > -#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */ > +#define c2_TTBR1_hilo 9 /* TTBR1 top 32 bits in LE case, low 32 bits in BE case */ These lines far exceed 80 chars, but not sure how to improve on that... > #define c2_TTBCR 10 /* Translation Table Base Control R. */ > #define c3_DACR 11 /* Domain Access Control Register */ > #define c5_DFSR 12 /* Data Fault Status Register */ > diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S > index 1b9844d..2d10b2d 100644 > --- a/arch/arm/kvm/init.S > +++ b/arch/arm/kvm/init.S > @@ -22,6 +22,7 @@ > #include <asm/kvm_asm.h> > #include <asm/kvm_arm.h> > #include <asm/kvm_mmu.h> > +#include <asm/assembler.h> > > /******************************************************************** > * Hypervisor initialization > @@ -70,8 +71,10 @@ __do_hyp_init: > cmp r0, #0 @ We have a SP? > bne phase2 @ Yes, second stage init > > +ARM_BE8(setend be) @ Switch to Big Endian mode if needed > + > @ Set the HTTBR to point to the hypervisor PGD pointer passed > - mcrr p15, 4, r2, r3, c2 > + mcrr p15, 4, rr_lo_hi(r2, r3), c2 > > @ Set the HTCR and VTCR to the same shareability and cacheability > @ settings as the non-secure TTBCR and with T0SZ == 0. > @@ -137,7 +140,7 @@ phase2: > mov pc, r0 > > target: @ We're now in the trampoline code, switch page tables > - mcrr p15, 4, r2, r3, c2 > + mcrr p15, 4, rr_lo_hi(r2, r3), c2 > isb I guess you could switch r2 and r3 (without a third register or using stack space) on big endian to avoid the need for the macro in a header file and define the macro locally in the interrupts*.S files... Hmmm, undecided. > > @ Invalidate the old TLBs > diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S > index df19133..0784ec3 100644 > --- a/arch/arm/kvm/interrupts.S > +++ b/arch/arm/kvm/interrupts.S > @@ -25,6 +25,7 @@ > #include <asm/kvm_asm.h> > #include <asm/kvm_arm.h> > #include <asm/vfpmacros.h> > +#include <asm/assembler.h> > #include "interrupts_head.S" > > .text > @@ -52,14 +53,14 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) > dsb ishst > add r0, r0, #KVM_VTTBR > ldrd r2, r3, [r0] > - mcrr p15, 6, r2, r3, c2 @ Write VTTBR > + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR > isb > mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) > dsb ish > isb > mov r2, #0 > mov r3, #0 > - mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 > + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Back to VMID #0 > isb @ Not necessary if followed by eret > > ldmia sp!, {r2, r3} > @@ -135,7 +136,7 @@ ENTRY(__kvm_vcpu_run) > ldr r1, [vcpu, #VCPU_KVM] > add r1, r1, #KVM_VTTBR > ldrd r2, r3, [r1] > - mcrr p15, 6, r2, r3, c2 @ Write VTTBR > + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR > > @ We're all done, just restore the GPRs and go to the guest > restore_guest_regs > @@ -199,8 +200,13 @@ after_vfp_restore: > > restore_host_regs > clrex @ Clear exclusive monitor > +#ifndef __ARMEB__ > mov r0, r1 @ Return the return code > mov r1, #0 @ Clear upper bits in return value > +#else > + @ r1 already has return code > + mov r0, #0 @ Clear upper bits in return value > +#endif /* __ARMEB__ */ > bx lr @ return to IOCTL > > /******************************************************************** > diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S > index c371db7..67b4002 100644 > --- a/arch/arm/kvm/interrupts_head.S > +++ b/arch/arm/kvm/interrupts_head.S > @@ -251,8 +251,8 @@ vcpu .req r0 @ vcpu pointer always in r0 > mrc p15, 0, r3, c1, c0, 2 @ CPACR > mrc p15, 0, r4, c2, c0, 2 @ TTBCR > mrc p15, 0, r5, c3, c0, 0 @ DACR > - mrrc p15, 0, r6, r7, c2 @ TTBR 0 > - mrrc p15, 1, r8, r9, c2 @ TTBR 1 > + mrrc p15, 0, rr_lo_hi(r6, r7), c2 @ TTBR 0 > + mrrc p15, 1, rr_lo_hi(r8, r9), c2 @ TTBR 1 > mrc p15, 0, r10, c10, c2, 0 @ PRRR > mrc p15, 0, r11, c10, c2, 1 @ NMRR > mrc p15, 2, r12, c0, c0, 0 @ CSSELR > @@ -380,8 +380,8 @@ vcpu .req r0 @ vcpu pointer always in r0 > mcr p15, 0, r3, c1, c0, 2 @ CPACR > mcr p15, 0, r4, c2, c0, 2 @ TTBCR > mcr p15, 0, r5, c3, c0, 0 @ DACR > - mcrr p15, 0, r6, r7, c2 @ TTBR 0 > - mcrr p15, 1, r8, r9, c2 @ TTBR 1 > + mcrr p15, 0, rr_lo_hi(r6, r7), c2 @ TTBR 0 > + mcrr p15, 1, rr_lo_hi(r8, r9), c2 @ TTBR 1 > mcr p15, 0, r10, c10, c2, 0 @ PRRR > mcr p15, 0, r11, c10, c2, 1 @ NMRR > mcr p15, 2, r12, c0, c0, 0 @ CSSELR > @@ -413,13 +413,21 @@ vcpu .req r0 @ vcpu pointer always in r0 > ldr r9, [r2, #GICH_ELRSR1] > ldr r10, [r2, #GICH_APR] > > +ARM_BE8(rev r3, r3 ) > str r3, [r11, #VGIC_CPU_HCR] > +ARM_BE8(rev r4, r4 ) > str r4, [r11, #VGIC_CPU_VMCR] > +ARM_BE8(rev r5, r5 ) > str r5, [r11, #VGIC_CPU_MISR] > +ARM_BE8(rev r6, r6 ) > str r6, [r11, #VGIC_CPU_EISR] > +ARM_BE8(rev r7, r7 ) > str r7, [r11, #(VGIC_CPU_EISR + 4)] > +ARM_BE8(rev r8, r8 ) > str r8, [r11, #VGIC_CPU_ELRSR] > +ARM_BE8(rev r9, r9 ) > str r9, [r11, #(VGIC_CPU_ELRSR + 4)] > +ARM_BE8(rev r10, r10 ) > str r10, [r11, #VGIC_CPU_APR] Wouldn't it be semantically cleaner to to the byteswap after the loads from the hardware instead? > > /* Clear GICH_HCR */ > @@ -431,6 +439,7 @@ vcpu .req r0 @ vcpu pointer always in r0 > add r3, r11, #VGIC_CPU_LR > ldr r4, [r11, #VGIC_CPU_NR_LR] > 1: ldr r6, [r2], #4 > +ARM_BE8(rev r6, r6 ) > str r6, [r3], #4 > subs r4, r4, #1 > bne 1b > @@ -459,8 +468,11 @@ vcpu .req r0 @ vcpu pointer always in r0 > ldr r4, [r11, #VGIC_CPU_VMCR] > ldr r8, [r11, #VGIC_CPU_APR] > > +ARM_BE8(rev r3, r3 ) > str r3, [r2, #GICH_HCR] > +ARM_BE8(rev r4, r4 ) > str r4, [r2, #GICH_VMCR] > +ARM_BE8(rev r8, r8 ) > str r8, [r2, #GICH_APR] > > /* Restore list registers */ > @@ -468,6 +480,7 @@ vcpu .req r0 @ vcpu pointer always in r0 > add r3, r11, #VGIC_CPU_LR > ldr r4, [r11, #VGIC_CPU_NR_LR] > 1: ldr r6, [r3], #4 > +ARM_BE8(rev r6, r6 ) > str r6, [r2], #4 > subs r4, r4, #1 > bne 1b > @@ -498,7 +511,7 @@ vcpu .req r0 @ vcpu pointer always in r0 > mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL > isb > > - mrrc p15, 3, r2, r3, c14 @ CNTV_CVAL > + mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL > ldr r4, =VCPU_TIMER_CNTV_CVAL > add r5, vcpu, r4 > strd r2, r3, [r5] > @@ -538,12 +551,12 @@ vcpu .req r0 @ vcpu pointer always in r0 > > ldr r2, [r4, #KVM_TIMER_CNTVOFF] > ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] > - mcrr p15, 4, r2, r3, c14 @ CNTVOFF > + mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF > > ldr r4, =VCPU_TIMER_CNTV_CVAL > add r5, vcpu, r4 > ldrd r2, r3, [r5] > - mcrr p15, 3, r2, r3, c14 @ CNTV_CVAL > + mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL > isb > > ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] > -- > 1.8.1.4 > Thanks,
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 5c22851..ad1ad31 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -60,6 +60,13 @@ #define ARM_BE8(code...) #endif +/* swap pair of registers position depending on current endianity */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define rr_lo_hi(a1, a2) a2, a1 +#else +#define rr_lo_hi(a1, a2) a1, a2 +#endif + /* * Data preload for architectures that support it */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 661da11..12981d6 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -26,9 +26,9 @@ #define c1_ACTLR 4 /* Auxilliary Control Register */ #define c1_CPACR 5 /* Coprocessor Access Control */ #define c2_TTBR0 6 /* Translation Table Base Register 0 */ -#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ +#define c2_TTBR0_hilo 7 /* TTBR0 top 32 bits in LE case, low 32 bits in BE case */ #define c2_TTBR1 8 /* Translation Table Base Register 1 */ -#define c2_TTBR1_high 9 /* TTBR1 top 32 bits */ +#define c2_TTBR1_hilo 9 /* TTBR1 top 32 bits in LE case, low 32 bits in BE case */ #define c2_TTBCR 10 /* Translation Table Base Control R. */ #define c3_DACR 11 /* Domain Access Control Register */ #define c5_DFSR 12 /* Data Fault Status Register */ diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 1b9844d..2d10b2d 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -22,6 +22,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_arm.h> #include <asm/kvm_mmu.h> +#include <asm/assembler.h> /******************************************************************** * Hypervisor initialization @@ -70,8 +71,10 @@ __do_hyp_init: cmp r0, #0 @ We have a SP? bne phase2 @ Yes, second stage init +ARM_BE8(setend be) @ Switch to Big Endian mode if needed + @ Set the HTTBR to point to the hypervisor PGD pointer passed - mcrr p15, 4, r2, r3, c2 + mcrr p15, 4, rr_lo_hi(r2, r3), c2 @ Set the HTCR and VTCR to the same shareability and cacheability @ settings as the non-secure TTBCR and with T0SZ == 0. @@ -137,7 +140,7 @@ phase2: mov pc, r0 target: @ We're now in the trampoline code, switch page tables - mcrr p15, 4, r2, r3, c2 + mcrr p15, 4, rr_lo_hi(r2, r3), c2 isb @ Invalidate the old TLBs diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index df19133..0784ec3 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -25,6 +25,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_arm.h> #include <asm/vfpmacros.h> +#include <asm/assembler.h> #include "interrupts_head.S" .text @@ -52,14 +53,14 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) dsb ishst add r0, r0, #KVM_VTTBR ldrd r2, r3, [r0] - mcrr p15, 6, r2, r3, c2 @ Write VTTBR + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR isb mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) dsb ish isb mov r2, #0 mov r3, #0 - mcrr p15, 6, r2, r3, c2 @ Back to VMID #0 + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Back to VMID #0 isb @ Not necessary if followed by eret ldmia sp!, {r2, r3} @@ -135,7 +136,7 @@ ENTRY(__kvm_vcpu_run) ldr r1, [vcpu, #VCPU_KVM] add r1, r1, #KVM_VTTBR ldrd r2, r3, [r1] - mcrr p15, 6, r2, r3, c2 @ Write VTTBR + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR @ We're all done, just restore the GPRs and go to the guest restore_guest_regs @@ -199,8 +200,13 @@ after_vfp_restore: restore_host_regs clrex @ Clear exclusive monitor +#ifndef __ARMEB__ mov r0, r1 @ Return the return code mov r1, #0 @ Clear upper bits in return value +#else + @ r1 already has return code + mov r0, #0 @ Clear upper bits in return value +#endif /* __ARMEB__ */ bx lr @ return to IOCTL /******************************************************************** diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index c371db7..67b4002 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -251,8 +251,8 @@ vcpu .req r0 @ vcpu pointer always in r0 mrc p15, 0, r3, c1, c0, 2 @ CPACR mrc p15, 0, r4, c2, c0, 2 @ TTBCR mrc p15, 0, r5, c3, c0, 0 @ DACR - mrrc p15, 0, r6, r7, c2 @ TTBR 0 - mrrc p15, 1, r8, r9, c2 @ TTBR 1 + mrrc p15, 0, rr_lo_hi(r6, r7), c2 @ TTBR 0 + mrrc p15, 1, rr_lo_hi(r8, r9), c2 @ TTBR 1 mrc p15, 0, r10, c10, c2, 0 @ PRRR mrc p15, 0, r11, c10, c2, 1 @ NMRR mrc p15, 2, r12, c0, c0, 0 @ CSSELR @@ -380,8 +380,8 @@ vcpu .req r0 @ vcpu pointer always in r0 mcr p15, 0, r3, c1, c0, 2 @ CPACR mcr p15, 0, r4, c2, c0, 2 @ TTBCR mcr p15, 0, r5, c3, c0, 0 @ DACR - mcrr p15, 0, r6, r7, c2 @ TTBR 0 - mcrr p15, 1, r8, r9, c2 @ TTBR 1 + mcrr p15, 0, rr_lo_hi(r6, r7), c2 @ TTBR 0 + mcrr p15, 1, rr_lo_hi(r8, r9), c2 @ TTBR 1 mcr p15, 0, r10, c10, c2, 0 @ PRRR mcr p15, 0, r11, c10, c2, 1 @ NMRR mcr p15, 2, r12, c0, c0, 0 @ CSSELR @@ -413,13 +413,21 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r9, [r2, #GICH_ELRSR1] ldr r10, [r2, #GICH_APR] +ARM_BE8(rev r3, r3 ) str r3, [r11, #VGIC_CPU_HCR] +ARM_BE8(rev r4, r4 ) str r4, [r11, #VGIC_CPU_VMCR] +ARM_BE8(rev r5, r5 ) str r5, [r11, #VGIC_CPU_MISR] +ARM_BE8(rev r6, r6 ) str r6, [r11, #VGIC_CPU_EISR] +ARM_BE8(rev r7, r7 ) str r7, [r11, #(VGIC_CPU_EISR + 4)] +ARM_BE8(rev r8, r8 ) str r8, [r11, #VGIC_CPU_ELRSR] +ARM_BE8(rev r9, r9 ) str r9, [r11, #(VGIC_CPU_ELRSR + 4)] +ARM_BE8(rev r10, r10 ) str r10, [r11, #VGIC_CPU_APR] /* Clear GICH_HCR */ @@ -431,6 +439,7 @@ vcpu .req r0 @ vcpu pointer always in r0 add r3, r11, #VGIC_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r2], #4 +ARM_BE8(rev r6, r6 ) str r6, [r3], #4 subs r4, r4, #1 bne 1b @@ -459,8 +468,11 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r4, [r11, #VGIC_CPU_VMCR] ldr r8, [r11, #VGIC_CPU_APR] +ARM_BE8(rev r3, r3 ) str r3, [r2, #GICH_HCR] +ARM_BE8(rev r4, r4 ) str r4, [r2, #GICH_VMCR] +ARM_BE8(rev r8, r8 ) str r8, [r2, #GICH_APR] /* Restore list registers */ @@ -468,6 +480,7 @@ vcpu .req r0 @ vcpu pointer always in r0 add r3, r11, #VGIC_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r3], #4 +ARM_BE8(rev r6, r6 ) str r6, [r2], #4 subs r4, r4, #1 bne 1b @@ -498,7 +511,7 @@ vcpu .req r0 @ vcpu pointer always in r0 mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL isb - mrrc p15, 3, r2, r3, c14 @ CNTV_CVAL + mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL ldr r4, =VCPU_TIMER_CNTV_CVAL add r5, vcpu, r4 strd r2, r3, [r5] @@ -538,12 +551,12 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r2, [r4, #KVM_TIMER_CNTVOFF] ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, r2, r3, c14 @ CNTVOFF + mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF ldr r4, =VCPU_TIMER_CNTV_CVAL add r5, vcpu, r4 ldrd r2, r3, [r5] - mcrr p15, 3, r2, r3, c14 @ CNTV_CVAL + mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL isb ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
ARM v7 KVM assembler files fixes to work in big endian mode: vgic h/w registers are little endian; when asm code reads/writes from/to them, it needs to do byteswap after/before. Byte swap code uses ARM_BE8 wrapper to add swap only if BIG_ENDIAN kernel is configured mcrr and mrrc instructions take couple 32 bit registers as argument, one is supposed to be high part of 64 bit value and another is low part of 64 bit. Typically those values are loaded/stored with ldrd and strd instructions and those will load high and low parts in opposite register depending on endianity. Introduce and use rr_lo_hi macro that swap registers in BE mode when they are passed to mcrr and mrrc instructions. function that returns 64 bit result __kvm_vcpu_run in couple registers has to be adjusted for BE case. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> --- arch/arm/include/asm/assembler.h | 7 +++++++ arch/arm/include/asm/kvm_asm.h | 4 ++-- arch/arm/kvm/init.S | 7 +++++-- arch/arm/kvm/interrupts.S | 12 +++++++++--- arch/arm/kvm/interrupts_head.S | 27 ++++++++++++++++++++------- 5 files changed, 43 insertions(+), 14 deletions(-)