diff mbox

[3/4] pinctrl: sunxi: Add Allwinner A20 clock output pin functions

Message ID 1387891580-30715-4-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai Dec. 24, 2013, 1:26 p.m. UTC 
This patch adds the clock output pin functions on the A20.
The 2 pins can output a configurable clock to be used by
external modules. This is used on the CubieTruck, to supply
a 32768 Hz low power clock to the onboard Wifi+BT module.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/pinctrl/pinctrl-sunxi-pins.h | 2 ++
 1 file changed, 2 insertions(+)
diff mbox

Patch

diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
index 2c7446a..6fd8d4d 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
@@ -3774,12 +3774,14 @@  static const struct sunxi_desc_pin sun7i_a20_pins[] = {
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* MOSI */
 		  SUNXI_FUNCTION(0x3, "uart6"),		/* TX */
+		  SUNXI_FUNCTION(0x4, "clk_out_a"),	/* CLK_OUT_A */
 		  SUNXI_FUNCTION_IRQ(0x5, 24)),		/* EINT24 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI13,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "spi0"),		/* MISO */
 		  SUNXI_FUNCTION(0x3, "uart6"),		/* RX */
+		  SUNXI_FUNCTION(0x4, "clk_out_b"),	/* CLK_OUT_B */
 		  SUNXI_FUNCTION_IRQ(0x5, 25)),		/* EINT25 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN_PI14,
 		  SUNXI_FUNCTION(0x0, "gpio_in"),