From patchwork Wed Jan 1 06:09:28 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexander Shiyan X-Patchwork-Id: 3422991 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id ED443C02DC for ; Wed, 1 Jan 2014 06:10:13 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id BAABD200DC for ; Wed, 1 Jan 2014 06:10:12 +0000 (UTC) Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 3A9D5200E3 for ; Wed, 1 Jan 2014 06:10:11 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VyF0I-000768-RM; Wed, 01 Jan 2014 06:10:07 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1VyF0G-0003Q4-DZ; Wed, 01 Jan 2014 06:10:04 +0000 Received: from smtp42.i.mail.ru ([94.100.177.102]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VyF0B-0003PE-QT for linux-arm-kernel@lists.infradead.org; Wed, 01 Jan 2014 06:10:01 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mail.ru; s=mail2; h=Message-Id:Date:Subject:Cc:To:From; bh=0sQA8h1B/cHNQtxL/yR5nBmTwXYqkOGmzKZKGCN5Xik=; b=RTh28z2+gufrKz0mVckJ3+Wlzg9XATeApZps1GpJLJz+MgvKo4J4PZkMzeWJsYHM+6MsLKaxfqFqRq/XvuX8a3UBh/2p3RCguyItPBsVULUlGtXgLC/ndlyMsGqNEXehXus+66mj979VkOtvazlAtVlM3VpSEbaiBSAoT3b93ns=; Received: from [188.134.40.128] (port=24920 helo=shc.zet) by smtp42.i.mail.ru with esmtpa (envelope-from ) id 1VyEzo-0004Ss-PQ; Wed, 01 Jan 2014 10:09:37 +0400 From: Alexander Shiyan To: linux-spi@vger.kernel.org Subject: [PATCH 1/2] spi: clps711x: Driver refactor Date: Wed, 1 Jan 2014 10:09:28 +0400 Message-Id: <1388556568-10973-1-git-send-email-shc_work@mail.ru> X-Mailer: git-send-email 1.8.3.2 X-Mras: Ok X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140101_011000_435710_ACE65A66 X-CRM114-Status: GOOD ( 27.09 ) X-Spam-Score: -2.0 (--) Cc: Mark Brown , Alexander Shiyan , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00,DKIM_SIGNED, FREEMAIL_FROM,RCVD_IN_DNSWL_MED,RP_MATCHES_RCVD,T_DKIM_INVALID, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This is a complex patch for refactoring CLPS711X SPI driver. Major changes: - Eliminate usage. - Devicetree support. Since we do not have any platform users of this driver, non-DT support is removed. DT users will be introduced later once DT support for this platform will be completed. Signed-off-by: Alexander Shiyan --- drivers/spi/Kconfig | 2 +- drivers/spi/spi-clps711x.c | 233 ++++++++++------------------- include/linux/platform_data/spi-clps711x.h | 21 --- 3 files changed, 84 insertions(+), 172 deletions(-) delete mode 100644 include/linux/platform_data/spi-clps711x.h diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 81b96e5..54c7bb2a 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -150,7 +150,7 @@ config SPI_BUTTERFLY config SPI_CLPS711X tristate "CLPS711X host SPI controller" - depends on ARCH_CLPS711X + depends on OF && (ARCH_CLPS711X || COMPILE_TEST) help This enables dedicated general purpose SPI/Microwire1-compatible master mode interface (SSI1) for CLPS711X-based CPUs. diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 6f03d7e..9d8eb39 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -1,7 +1,7 @@ /* * CLPS711X SPI bus driver * - * Copyright (C) 2012 Alexander Shiyan + * Copyright (C) 2012-2014 Alexander Shiyan * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -9,113 +9,77 @@ * (at your option) any later version. */ -#include #include -#include -#include #include -#include +#include #include +#include +#include #include +#include +#include +#include #include -#include - -#include -#define DRIVER_NAME "spi-clps711x" +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) struct spi_clps711x_data { struct completion done; - + void __iomem *syncio; + struct regmap *syscon3; struct clk *spi_clk; - u32 max_speed_hz; - u8 *tx_buf; u8 *rx_buf; - int count; + unsigned int bpw; int len; - - int chipselect[0]; }; static int spi_clps711x_setup(struct spi_device *spi) { - struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master); + if (!spi->controller_state) { + int ret; - /* We are expect that SPI-device is not selected */ - gpio_direction_output(hw->chipselect[spi->chip_select], - !(spi->mode & SPI_CS_HIGH)); + ret = devm_gpio_request(&spi->master->dev, spi->cs_gpio, NULL); + if (ret) + return ret; - return 0; -} - -static void spi_clps711x_setup_mode(struct spi_device *spi) -{ - /* Setup edge for transfer */ - if (spi->mode & SPI_CPHA) - clps_writew(clps_readw(SYSCON3) | SYSCON3_ADCCKNSEN, SYSCON3); - else - clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCKNSEN, SYSCON3); -} - -static int spi_clps711x_setup_xfer(struct spi_device *spi, - struct spi_transfer *xfer) -{ - u32 speed = xfer->speed_hz ? : spi->max_speed_hz; - u8 bpw = xfer->bits_per_word; - struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master); - - if (bpw != 8) { - dev_err(&spi->dev, "Unsupported master bus width %i\n", bpw); - return -EINVAL; + spi->controller_state = spi; } - /* Setup SPI frequency divider */ - if (!speed || (speed >= hw->max_speed_hz)) - clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) | - SYSCON1_ADCKSEL(3), SYSCON1); - else if (speed >= (hw->max_speed_hz / 2)) - clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) | - SYSCON1_ADCKSEL(2), SYSCON1); - else if (speed >= (hw->max_speed_hz / 8)) - clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) | - SYSCON1_ADCKSEL(1), SYSCON1); - else - clps_writel((clps_readl(SYSCON1) & ~SYSCON1_ADCKSEL_MASK) | - SYSCON1_ADCKSEL(0), SYSCON1); - - return 0; + return gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); } static int spi_clps711x_transfer_one_message(struct spi_master *master, struct spi_message *msg) { struct spi_clps711x_data *hw = spi_master_get_devdata(master); + struct spi_device *spi = msg->spi; struct spi_transfer *xfer; - int status = 0, cs = hw->chipselect[msg->spi->chip_select]; - u32 data; - spi_clps711x_setup_mode(msg->spi); + /* Setup mode for transfer */ + regmap_update_bits(hw->syscon3, SYSCON_OFFSET, SYSCON3_ADCCKNSEN, + (spi->mode & SPI_CPHA) ? SYSCON3_ADCCKNSEN : 0); list_for_each_entry(xfer, &msg->transfers, transfer_list) { - if (spi_clps711x_setup_xfer(msg->spi, xfer)) { - status = -EINVAL; - goto out_xfr; - } + u8 data; - gpio_set_value(cs, !!(msg->spi->mode & SPI_CS_HIGH)); + clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz); + + gpio_set_value(spi->cs_gpio, !!(spi->mode & SPI_CS_HIGH)); reinit_completion(&hw->done); - hw->count = 0; hw->len = xfer->len; + hw->bpw = xfer->bits_per_word ? : spi->bits_per_word; hw->tx_buf = (u8 *)xfer->tx_buf; hw->rx_buf = (u8 *)xfer->rx_buf; /* Initiate transfer */ - data = hw->tx_buf ? hw->tx_buf[hw->count] : 0; - clps_writel(data | SYNCIO_FRMLEN(8) | SYNCIO_TXFRMEN, SYNCIO); - + data = hw->tx_buf ? *hw->tx_buf++ : 0; + writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, + hw->syncio); wait_for_completion(&hw->done); if (xfer->delay_usecs) @@ -123,13 +87,13 @@ static int spi_clps711x_transfer_one_message(struct spi_master *master, if (xfer->cs_change || list_is_last(&xfer->transfer_list, &msg->transfers)) - gpio_set_value(cs, !(msg->spi->mode & SPI_CS_HIGH)); + gpio_set_value(spi->cs_gpio, + !(spi->mode & SPI_CS_HIGH)); msg->actual_length += xfer->len; } -out_xfr: - msg->status = status; + msg->status = 0; spi_finalize_current_message(master); return 0; @@ -138,19 +102,18 @@ out_xfr: static irqreturn_t spi_clps711x_isr(int irq, void *dev_id) { struct spi_clps711x_data *hw = (struct spi_clps711x_data *)dev_id; - u32 data; + u8 data; /* Handle RX */ - data = clps_readb(SYNCIO); + data = readb(hw->syncio); if (hw->rx_buf) - hw->rx_buf[hw->count] = (u8)data; - - hw->count++; + *hw->rx_buf++ = data; /* Handle TX */ - if (hw->count < hw->len) { - data = hw->tx_buf ? hw->tx_buf[hw->count] : 0; - clps_writel(data | SYNCIO_FRMLEN(8) | SYNCIO_TXFRMEN, SYNCIO); + if (--hw->len > 0) { + data = hw->tx_buf ? *hw->tx_buf++ : 0; + writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, + hw->syncio); } else complete(&hw->done); @@ -159,116 +122,86 @@ static irqreturn_t spi_clps711x_isr(int irq, void *dev_id) static int spi_clps711x_probe(struct platform_device *pdev) { - int i, ret; - struct spi_master *master; + struct device_node *np = pdev->dev.of_node; struct spi_clps711x_data *hw; - struct spi_clps711x_pdata *pdata = dev_get_platdata(&pdev->dev); + struct spi_master *master; + struct resource *res; + int irq, ret; - if (!pdata) { - dev_err(&pdev->dev, "No platform data supplied\n"); - return -EINVAL; - } + master = spi_alloc_master(&pdev->dev, sizeof(*hw)); + if (!master) + return -ENOMEM; - if (pdata->num_chipselect < 1) { - dev_err(&pdev->dev, "At least one CS must be defined\n"); + irq = platform_get_irq(pdev, 0); + if (irq < 0) return -EINVAL; - } - master = spi_alloc_master(&pdev->dev, - sizeof(struct spi_clps711x_data) + - sizeof(int) * pdata->num_chipselect); - if (!master) { - dev_err(&pdev->dev, "SPI allocating memory error\n"); - return -ENOMEM; + hw = spi_master_get_devdata(master); + + hw->spi_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(hw->spi_clk)) { + ret = PTR_ERR(hw->spi_clk); + goto err_out; } - master->bus_num = pdev->id; + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8); + master->bus_num = -1; + master->dev.of_node = np; master->mode_bits = SPI_CPHA | SPI_CS_HIGH; - master->bits_per_word_mask = SPI_BPW_MASK(8); - master->num_chipselect = pdata->num_chipselect; master->setup = spi_clps711x_setup; master->transfer_one_message = spi_clps711x_transfer_one_message; - hw = spi_master_get_devdata(master); - - for (i = 0; i < master->num_chipselect; i++) { - hw->chipselect[i] = pdata->chipselect[i]; - if (!gpio_is_valid(hw->chipselect[i])) { - dev_err(&pdev->dev, "Invalid CS GPIO %i\n", i); - ret = -EINVAL; - goto err_out; - } - if (gpio_request(hw->chipselect[i], DRIVER_NAME)) { - dev_err(&pdev->dev, "Can't get CS GPIO %i\n", i); - ret = -EINVAL; - goto err_out; - } + hw->syscon3 = syscon_regmap_lookup_by_phandle(np, "syscon"); + if (IS_ERR(hw->syscon3)) { + ret = PTR_ERR(hw->syscon3); + goto err_out; } - hw->spi_clk = devm_clk_get(&pdev->dev, "spi"); - if (IS_ERR(hw->spi_clk)) { - dev_err(&pdev->dev, "Can't get clocks\n"); - ret = PTR_ERR(hw->spi_clk); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hw->syncio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hw->syncio)) { + ret = PTR_ERR(hw->syncio); goto err_out; } - hw->max_speed_hz = clk_get_rate(hw->spi_clk); init_completion(&hw->done); - platform_set_drvdata(pdev, master); /* Disable extended mode due hardware problems */ - clps_writew(clps_readw(SYSCON3) & ~SYSCON3_ADCCON, SYSCON3); + ret = regmap_update_bits(hw->syscon3, SYSCON_OFFSET, SYSCON3_ADCCON, 0); + if (ret) + goto err_out; /* Clear possible pending interrupt */ - clps_readl(SYNCIO); + readl(hw->syncio); - ret = devm_request_irq(&pdev->dev, IRQ_SSEOTI, spi_clps711x_isr, 0, + ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0, dev_name(&pdev->dev), hw); - if (ret) { - dev_err(&pdev->dev, "Can't request IRQ\n"); + if (ret) goto err_out; - } ret = devm_spi_register_master(&pdev->dev, master); - if (!ret) { - dev_info(&pdev->dev, - "SPI bus driver initialized. Master clock %u Hz\n", - hw->max_speed_hz); + if (!ret) return 0; - } - - dev_err(&pdev->dev, "Failed to register master\n"); err_out: - while (--i >= 0) - if (gpio_is_valid(hw->chipselect[i])) - gpio_free(hw->chipselect[i]); - spi_master_put(master); return ret; } -static int spi_clps711x_remove(struct platform_device *pdev) -{ - int i; - struct spi_master *master = platform_get_drvdata(pdev); - struct spi_clps711x_data *hw = spi_master_get_devdata(master); - - for (i = 0; i < master->num_chipselect; i++) - if (gpio_is_valid(hw->chipselect[i])) - gpio_free(hw->chipselect[i]); - - return 0; -} +static const struct of_device_id clps711x_spi_dt_ids[] = { + { .compatible = "cirrus,clps711x-spi", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids); static struct platform_driver clps711x_spi_driver = { .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, + .name = "clps711x-spi", + .owner = THIS_MODULE, + .of_match_table = clps711x_spi_dt_ids, }, .probe = spi_clps711x_probe, - .remove = spi_clps711x_remove, }; module_platform_driver(clps711x_spi_driver); diff --git a/include/linux/platform_data/spi-clps711x.h b/include/linux/platform_data/spi-clps711x.h deleted file mode 100644 index 301956e..0000000 --- a/include/linux/platform_data/spi-clps711x.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * CLPS711X SPI bus driver definitions - * - * Copyright (C) 2012 Alexander Shiyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H -#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H - -/* Board specific platform_data */ -struct spi_clps711x_pdata { - int *chipselect; /* Array of GPIO-numbers */ - int num_chipselect; /* Total count of GPIOs */ -}; - -#endif