[v7,2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding

Commit Message

Loc Ho Jan. 3, 2014, 12:22 a.m. UTC

Signed-off-by: Loc Ho <[e-mail]>
Signed-off-by: Tuan Phan <[e-mail]>
Signed-off-by: Suman Tripathi <[e-mail]>
---
 .../devicetree/bindings/ata/apm-xgene.txt          |   68 ++++++++++++++++++++
 1 files changed, 68 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ata/apm-xgene.txt

Patch

diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt
new file mode 100644
index 0000000..3d1421a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -0,0 +1,68 @@ 
+* APM X-Gene 6.0 Gb/s SATA host controller nodes
+
+SATA host controller nodes are defined to describe on-chip Serial ATA
+controllers. Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-ahci-sgmii" if mux'ed with SGMII
+			  or "apm,xgene-ahci-pcie" if mux'ed with PCIe.
+- reg			: First memory resource shall be the AHCI memory
+			  resource.
+			  Second memory resource shall be the host controller
+			  memory resource.
+- interrupts		: Interrupt mapping for SATA host controller IRQ.
+- clocks		: Reference to the clock entry.
+- phys			: PHY reference with parameter 0.
+- phy-names		: Name of the PHY. Shall be "sata-6g".
+
+Optional properties:
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+- interrupt-parent	: Interrupt controller.
+
+Example:
+		sataclk: sataclk {
+			compatible = "fixed-clock";
+			#clock-cells = <1>;
+			clock-frequency = <100000000>;
+			clock-output-names = "sataclk";
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>,
+			      <0x0 0x1f22c000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy-ext";
+			reg = <0x0 0x1f23a000 0x0 0x100>,
+			      <0x0 0x1f23c000 0x0 0x100>,
+			      <0x0 0x1f2d0000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci-sgmii";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x10000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x87 0x4>;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-6g";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci-pcie";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x10000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x88 0x4>;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-6g";
+		};