[v2,04/16] net: stmmac: Allocate and pass soc/board specific data to callbacks

Commit Message

Chen-Yu Tsai Jan. 10, 2014, 7 a.m. UTC

The current .init and .exit callbacks requires access to driver
private data structures. This is not a good seperation and abstraction.

Instead, we add a new .setup callback for allocating private data, and
pass the returned pointer to the other callbacks.

Signed-off-by: Chen-Yu Tsai <[e-mail]>
---
 Documentation/networking/stmmac.txt                   | 12 ++++++++----
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 18 ++++++++++++++----
 include/linux/stmmac.h                                |  6 ++++--
 3 files changed, 26 insertions(+), 10 deletions(-)

Patch

diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index cdd916d..2090895 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -127,8 +127,9 @@  struct plat_stmmacenet_data {
 	int riwt_off;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
+	void *(*setup)(struct platform_device *pdev);
+	int (*init)(struct platform_device *pdev, void *priv);
+	void (*exit)(struct platform_device *pdev, void *priv);
 	void *custom_cfg;
 	void *custom_data;
 	void *bsp_priv;
@@ -169,10 +170,13 @@  Where:
  o bus_setup: perform HW setup of the bus. For example, on some ST platforms
 	     this field is used to configure the AMBA  bridge to generate more
 	     efficient STBus traffic.
- o init/exit: callbacks used for calling a custom initialization;
+ o setup/init/exit: callbacks used for calling a custom initialization;
 	     this is sometime necessary on some platforms (e.g. ST boxes)
 	     where the HW needs to have set some PIO lines or system cfg
-	     registers.
+	     registers. setup should return a pointer to private data,
+	     which will be stored in bsp_priv, and then passed to init and
+	     exit callbacks. init/exit callbacks should not use or modify
+	     platform data.
  o custom_cfg/custom_data: this is a custom configuration that can be passed
 			   while initializing the resources.
  o bsp_priv: another private pointer.
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 3974586..86ee903 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -140,9 +140,16 @@  static int stmmac_pltfr_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* Custom setup (if needed) */
+	if (plat_dat->setup) {
+		plat_dat->bsp_priv = plat_dat->setup(pdev);
+		if (IS_ERR(plat_dat->bsp_priv))
+			return PTR_ERR(plat_dat->bsp_priv);
+	}
+
 	/* Custom initialisation (if needed)*/
 	if (plat_dat->init) {
-		ret = plat_dat->init(pdev);
+		ret = plat_dat->init(pdev, plat_dat->bsp_priv);
 		if (unlikely(ret))
 			return ret;
 	}
@@ -199,7 +206,10 @@  static int stmmac_pltfr_remove(struct platform_device *pdev)
 	int ret = stmmac_dvr_remove(ndev);
 
 	if (priv->plat->exit)
-		priv->plat->exit(pdev);
+		priv->plat->exit(pdev, priv->plat->bsp_priv);
+
+	if (priv->plat->free)
+		priv->plat->free(pdev, priv->plat->bsp_priv);
 
 	return ret;
 }
@@ -228,7 +238,7 @@  int stmmac_pltfr_freeze(struct device *dev)
 
 	ret = stmmac_freeze(ndev);
 	if (plat_dat->exit)
-		plat_dat->exit(pdev);
+		plat_dat->exit(pdev, plat_dat->bsp_priv);
 
 	return ret;
 }
@@ -240,7 +250,7 @@  int stmmac_pltfr_restore(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 
 	if (plat_dat->init)
-		plat_dat->init(pdev);
+		plat_dat->init(pdev, plat_dat->bsp_priv);
 
 	return stmmac_restore(ndev);
 }
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index bb5deb0..c407791 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -112,8 +112,10 @@  struct plat_stmmacenet_data {
 	int riwt_off;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
+	void *(*setup)(struct platform_device *pdev);
+	void (*free)(struct platform_device *pdev, void *priv);
+	int (*init)(struct platform_device *pdev, void *priv);
+	void (*exit)(struct platform_device *pdev, void *priv);
 	void *custom_cfg;
 	void *custom_data;
 	void *bsp_priv;