tty/serial: at91: disable uart timer at start of shutdown

Commit Message

Nicolas Ferre Jan. 10, 2014, 9:33 a.m. UTC

From: Marek Roszko <[e-mail]>

The uart timer will schedule a tasklet when it fires. It is possible that it
can fire inside _shutdown before it is killed in the dma and pdc cleanup
routines. This causes a tasklet that exists after the port is shutdown, so when
the kernel finally executes it, it panics as the tty port is NULL.

This is a somewhat rare condition but its possible if a program keeps on
opening/closing the port. It has been observed in particular with systemd
boot messages that were causing a kernel panic because of this behavior.

Moving the timer deletion to the beginning of the function stops a tasklet from
being scheduled unexpectedly.

Signed-off-by: Marek Roszko <[e-mail]>
Cc: stable <[e-mail]> # v3.12
[[e-mail]: modify commit message, call setup_timer() in any case]
Signed-off-by: Nicolas Ferre <[e-mail]>
---
 drivers/tty/serial/atmel_serial.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

Patch

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2b6ac1be00d3..a49f10d269b2 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -825,9 +825,6 @@  static void atmel_release_rx_dma(struct uart_port *port)
 	atmel_port->desc_rx = NULL;
 	atmel_port->chan_rx = NULL;
 	atmel_port->cookie_rx = -EINVAL;
-
-	if (!atmel_port->is_usart)
-		del_timer_sync(&atmel_port->uart_timer);
 }
 
 static void atmel_rx_from_dma(struct uart_port *port)
@@ -1229,9 +1226,6 @@  static void atmel_release_rx_pdc(struct uart_port *port)
 				 DMA_FROM_DEVICE);
 		kfree(pdc->buf);
 	}
-
-	if (!atmel_port->is_usart)
-		del_timer_sync(&atmel_port->uart_timer);
 }
 
 static void atmel_rx_from_pdc(struct uart_port *port)
@@ -1604,12 +1598,13 @@  static int atmel_startup(struct uart_port *port)
 	/* enable xmit & rcvr */
 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
 
+	setup_timer(&atmel_port->uart_timer,
+			atmel_uart_timer_callback,
+			(unsigned long)port);
+
 	if (atmel_use_pdc_rx(port)) {
 		/* set UART timeout */
 		if (!atmel_port->is_usart) {
-			setup_timer(&atmel_port->uart_timer,
-					atmel_uart_timer_callback,
-					(unsigned long)port);
 			mod_timer(&atmel_port->uart_timer,
 					jiffies + uart_poll_timeout(port));
 		/* set USART timeout */
@@ -1624,9 +1619,6 @@  static int atmel_startup(struct uart_port *port)
 	} else if (atmel_use_dma_rx(port)) {
 		/* set UART timeout */
 		if (!atmel_port->is_usart) {
-			setup_timer(&atmel_port->uart_timer,
-					atmel_uart_timer_callback,
-					(unsigned long)port);
 			mod_timer(&atmel_port->uart_timer,
 					jiffies + uart_poll_timeout(port));
 		/* set USART timeout */
@@ -1652,6 +1644,12 @@  static void atmel_shutdown(struct uart_port *port)
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	/*
+	 * Prevent any tasklets being scheduled during
+	 * cleanup
+	 */
+	del_timer_sync(&atmel_port->uart_timer);
+
+	/*
 	 * Clear out any scheduled tasklets before
 	 * we destroy the buffers
 	 */