@@ -149,6 +149,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx51-babbage.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
imx53-ard.dtb \
+ imx53-eukrea-mbimxsd53-baseboard.dts \
imx53-evk.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
new file mode 100644
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX53";
+ compatible = "eukrea,cpuimx53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x20000000>; /* 512M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-eukrea {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_EIM_EB2__GPIO2_30 0x1e4
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX53_FEC_PINGRP1>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX53_I2C1_PINGRP1>;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <MX53_NAND_PINGRP1>;
+
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
+&usbh1 {
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "imx53-eukrea-cpuimx53.dtsi"
+
+/ {
+ model = "Eukrea MBIMX53SD";
+ compatible = "eukrea,mbimxsd53","eukrea,cpuimx53", "fsl,imx53";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ button-1 {
+ label = "BP1";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ reg = <0>;
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+};
+
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <®_3p3v>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx53-eukrea {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_ESDHC1_PINGRP1
+ MX53_PAD_DISP0_DAT23__GPIO5_17 0x80000000 /* CD */
+ >;
+ };
+
+ pinctrl_gpiokeys: gpiokeysgrp {
+ fsl,pins = <MX53_PAD_KEY_COL4__GPIO4_14 0x80000000>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX53_PAD_KEY_ROW4__GPIO4_15 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_UART1_PINGRP2
+ MX53_UART1_PINGRP3
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX53_UART2_PINGRP2>;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog. * SD. * USB host. * USB otg(device and host). Cc: Eric Bénard <eric@eukrea.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Denis Carikli <denis@eukrea.com> --- ChangeLog v3->v4: - Reordered the Cc list and dropped the Cc to the devicetree binding maintainers. - Added USB otg support. - Cosmetic cleanups in the iomuxc node, the esdhc1 node was updated accordingly. ChangeLog v2->v3: - Removed the useless regulator-always-on - Added the rts and cts pins to the uart1 pinctrl ChangeLog v1->v2: - Added the board target in arch/arm/boot/dts/Makefile - Fixed the gpios to now use the gpios defines. - Fixed the button linux code to now use an input define. - Fixed the regulator. --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi | 85 +++++++++++++++ .../boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts | 113 ++++++++++++++++++++ 3 files changed, 199 insertions(+) create mode 100644 arch/arm/boot/dts/imx53-eukrea-cpuimx53.dtsi create mode 100644 arch/arm/boot/dts/imx53-eukrea-mbimxsd53-baseboard.dts