[v7,4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries

Commit Message

Loc Ho Jan. 15, 2014, 7:10 a.m. UTC

This patch adds the DTS entries for the APM X-Gene SoC 15Gbps Multi-purpose
PHY driver. The PHY for SATA controller 2 and 3 are enabled by default.

Signed-off-by: Loc Ho <[e-mail]>
Signed-off-by: Tuan Phan <[e-mail]>
Signed-off-by: Suman Tripathi <[e-mail]>
---
 arch/arm64/boot/dts/apm-storm.dtsi |   76 ++++++++++++++++++++++++++++++++++++
 1 files changed, 76 insertions(+), 0 deletions(-)

Patch

diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi
index 359d7b6..a1f475d 100644
--- a/arch/arm64/boot/dts/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm-storm.dtsi
@@ -176,6 +176,51 @@ 
 				reg-names = "csr-reg";
 				clock-output-names = "eth8clk";
 			};
+
+			sataphy1clk: sataphy1clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy1clk";
+				status = "disabled";
+				csr-offset = <0x4>;
+				csr-mask = <0x00>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy2clk: sataphy1clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy2clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy3clk: sataphy1clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "socplldiv2";
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy3clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
 		};
 
 		serial0: serial@1c020000 {
@@ -193,5 +238,36 @@ 
 			reg = <0x0 0x17000014 0x0 0x100>;
 			mask = <0x1>;
 		};
+
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy1clk 0>;
+			status = "disabled";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy2clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy-ext";
+			reg = <0x0 0x1f23a000 0x0 0x100>,
+			      <0x0 0x1f2d0000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy3clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <31 31 31 31 31 31>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
 	};
 };