| Message ID | 1389803532-8516-1-git-send-email-denis@eukrea.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Jan 15, 2014 at 05:32:12PM +0100, Denis Carikli wrote: > The following devices/functionalities were added: > * Main and secondary UARTs. > * i2c and the pcf8563 device. > * Ethernet. > * NAND. > * The BP1 button. > * The LED. > * Watchdog > * SD. > > Cc: Eric Bénard <eric@eukrea.com> > Cc: Grant Likely <grant.likely@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Shawn Guo <shawn.guo@linaro.org> > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Signed-off-by: Denis Carikli <denis@eukrea.com> > Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Applied, thanks.
On Wed, Jan 15, 2014 at 05:32:12PM +0100, Denis Carikli wrote: > diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi > new file mode 100644 > index 0000000..303f789 > --- /dev/null > +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi > @@ -0,0 +1,59 @@ > +/* > + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version 2 > + * of the License, or (at your option) any later version. > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include "imx35.dtsi" > + > +/ { > + model = "Eukrea CPUIMX35"; > + compatible = "eukrea,cpuimx35", "fsl,imx35"; > + > + memory { > + reg = <0x80000000 0x8000000>; /* 128M */ > + }; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec>; > + status = "okay"; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pcf8563@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&iomuxc { > + imx35-eukrea { > + pinctrl_fec: fecgrp { > + fsl,pins = <MX35_FEC_PINGRP1>; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = <MX35_I2C1_PINGRP1>; > + }; You have these two pingrp in imx35-eukrea-cpuimx35.dtsi ... > + }; > +}; > + > +&nfc { > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + nand-on-flash-bbt; > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts > new file mode 100644 > index 0000000..23f6fe1 > --- /dev/null > +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts > @@ -0,0 +1,137 @@ > +/* > + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * as published by the Free Software Foundation; either version 2 > + * of the License, or (at your option) any later version. > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include "imx35-eukrea-cpuimx35.dtsi" ... imx35-eukrea-cpuimx35.dtsi is being included here ... > + > +/ { > + model = "Eukrea CPUIMX35"; > + compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35"; > + > + gpio_keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_bp1>; > + > + bp1 { > + label = "BP1"; > + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; > + linux,code = <BTN_MISC>; > + gpio-key,wakeup; > + linux,input-type = <1>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_led1>; > + > + led1 { > + label = "led1"; > + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > +}; > + > +&audmux { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_audmux>; > + status = "okay"; > +}; > + > +&esdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_esdhc1>; > + cd-gpios = <&gpio3 24>; > + status = "okay"; > +}; > + > +&i2c1 { > + tlv320aic23: codec@1a { > + compatible = "ti,tlv320aic23"; > + reg = <0x1a>; > + }; > +}; > + > +&iomuxc { > + imx35-eukrea { > + pinctrl_audmux: audmuxgrp { > + fsl,pins = <MX35_AUDMUX_PINGRP1>; > + }; > + > + pinctrl_bp1: bp1grp { > + fsl,pins = <MX35_PAD_LD19__GPIO3_25 0x80000000>; > + }; > + > + pinctrl_esdhc1: esdhc1grp { > + fsl,pins = < > + MX35_ESDHC1_PINGRP1 > + MX35_PAD_LD18__GPIO3_24 0x80000000 /* CD */ > + >; > + }; > + > + pinctrl_fec: fecgrp { > + fsl,pins = <MX35_FEC_PINGRP1>; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = <MX35_I2C1_PINGRP1>; > + }; ... why do you need to have them again? I spotted this when rebasing this patch on pingrp removal series, and just dropped them from imx35-eukrea-mbimxsd35-baseboard.dts. Let me know if I did get it right. Shawn > + > + pinctrl_led1: led1grp { > + fsl,pins = <MX35_PAD_LD23__GPIO3_29 0x80000000>; > + }; > + > + pinctrl_reg_lcd_3v3: reg-lcd-3v3 { > + fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX35_UART1_PINGRP1 > + MX35_UART1_RTSCTS_PINGRP1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX35_UART2_PINGRP1 > + MX35_UART2_RTSCTS_PINGRP1 > + >; > + }; > + }; > +}; > + > +&ssi1 { > + fsl,mode = "i2s-slave"; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + fsl,uart-has-rtscts; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + fsl,uart-has-rtscts; > + status = "okay"; > +}; > -- > 1.7.9.5 >
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 570dcd6..98d3921 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -145,6 +145,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-phytec-phycard-s-som.dtb \ imx27-phytec-phycard-s-rdk.dtb \ imx31-bug.dtb \ + imx35-eukrea-mbimxsd35-baseboard.dtb \ imx50-evk.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi new file mode 100644 index 0000000..303f789 --- /dev/null +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx35.dtsi" + +/ { + model = "Eukrea CPUIMX35"; + compatible = "eukrea,cpuimx35", "fsl,imx35"; + + memory { + reg = <0x80000000 0x8000000>; /* 128M */ + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&iomuxc { + imx35-eukrea { + pinctrl_fec: fecgrp { + fsl,pins = <MX35_FEC_PINGRP1>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = <MX35_I2C1_PINGRP1>; + }; + }; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts new file mode 100644 index 0000000..23f6fe1 --- /dev/null +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -0,0 +1,137 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx35-eukrea-cpuimx35.dtsi" + +/ { + model = "Eukrea CPUIMX35"; + compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bp1>; + + bp1 { + label = "BP1"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + gpio-key,wakeup; + linux,input-type = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led1>; + + led1 { + label = "led1"; + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio3 24>; + status = "okay"; +}; + +&i2c1 { + tlv320aic23: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; +}; + +&iomuxc { + imx35-eukrea { + pinctrl_audmux: audmuxgrp { + fsl,pins = <MX35_AUDMUX_PINGRP1>; + }; + + pinctrl_bp1: bp1grp { + fsl,pins = <MX35_PAD_LD19__GPIO3_25 0x80000000>; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_ESDHC1_PINGRP1 + MX35_PAD_LD18__GPIO3_24 0x80000000 /* CD */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = <MX35_FEC_PINGRP1>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = <MX35_I2C1_PINGRP1>; + }; + + pinctrl_led1: led1grp { + fsl,pins = <MX35_PAD_LD23__GPIO3_29 0x80000000>; + }; + + pinctrl_reg_lcd_3v3: reg-lcd-3v3 { + fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_UART1_PINGRP1 + MX35_UART1_RTSCTS_PINGRP1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX35_UART2_PINGRP1 + MX35_UART2_RTSCTS_PINGRP1 + >; + }; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +};