@@ -105,7 +105,7 @@ ifeq ($(CONFIG_PM),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o suspend-imx6.o
# i.MX6SL reuses i.MX6Q code
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o suspend-imx6.o
endif
# i.MX5 based machines
@@ -121,6 +121,14 @@ static const u32 imx6dl_mmdc_io_offset[] __initconst = {
0x74c, /* GPR_ADDS */
};
+static const u32 imx6sl_mmdc_io_offset[] __initconst = {
+ 0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
+ 0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
+ 0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+ 0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
+ 0x330, 0x334, 0x320, /* SDCKE0, SDCKE1, RESET */
+};
+
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
.cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
@@ -141,6 +149,16 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
.mmdc_io_offset = imx6dl_mmdc_io_offset,
};
+static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
+ .cpu_type = MXC_CPU_IMX6SL,
+ .mmdc_compat = "fsl,imx6sl-mmdc",
+ .src_compat = "fsl,imx6sl-src",
+ .iomuxc_compat = "fsl,imx6sl-iomuxc",
+ .gpc_compat = "fsl,imx6sl-gpc",
+ .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
+ .mmdc_io_offset = imx6sl_mmdc_io_offset,
+};
+
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -532,5 +550,5 @@ void __init imx6dl_pm_init(void)
void __init imx6sl_pm_init(void)
{
- imx6_pm_common_init(NULL);
+ imx6_pm_common_init(&imx6sl_pm_data);
}
@@ -63,6 +63,7 @@
#define MX6Q_SRC_GPR1 0x20
#define MX6Q_SRC_GPR2 0x24
#define MX6Q_MMDC_MAPSR 0x404
+#define MX6Q_MMDC_MPDGCTRL0 0x83c
#define MX6Q_GPC_IMR1 0x08
#define MX6Q_GPC_IMR2 0x0c
#define MX6Q_GPC_IMR3 0x10
@@ -107,14 +108,36 @@
ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
+ cmp r3, #MXC_CPU_IMX6SL
+ bne 4f
+
+ /* reset read FIFO, RST_RD_FIFO */
+ ldr r7, =MX6Q_MMDC_MPDGCTRL0
+ ldr r6, [r11, r7]
+ orr r6, r6, #(1 << 31)
+ str r6, [r11, r7]
+2:
+ ldr r6, [r11, r7]
+ ands r6, r6, #(1 << 31)
+ bne 2b
+
+ /* reset FIFO a second time */
+ ldr r6, [r11, r7]
+ orr r6, r6, #(1 << 31)
+ str r6, [r11, r7]
+3:
+ ldr r6, [r11, r7]
+ ands r6, r6, #(1 << 31)
+ bne 3b
+4:
/* let DDR out of self-refresh */
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
bic r7, r7, #(1 << 21)
str r7, [r11, #MX6Q_MMDC_MAPSR]
-2:
+5:
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
ands r7, r7, #(1 << 25)
- bne 2b
+ bne 5b
/* enable DDR auto power saving */
ldr r7, [r11, #MX6Q_MMDC_MAPSR]
@@ -182,12 +205,27 @@ poll_dvfs_set:
ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET
add r8, r8, r0
+ /* i.MX6SL's last 3 IOs need special setting */
+ cmp r3, #MXC_CPU_IMX6SL
+ subeq r7, r7, #0x3
set_mmdc_io_lpm:
ldr r9, [r8], #0x8
str r6, [r11, r9]
subs r7, r7, #0x1
bne set_mmdc_io_lpm
+ cmp r3, #MXC_CPU_IMX6SL
+ bne set_mmdc_io_lpm_done
+ ldr r6, =0x1000
+ ldr r9, [r8], #0x8
+ str r6, [r11, r9]
+ ldr r9, [r8], #0x8
+ str r6, [r11, r9]
+ ldr r6, =0x80000
+ ldr r9, [r8]
+ str r6, [r11, r9]
+set_mmdc_io_lpm_done:
+
/*
* mask all GPC interrupts before
* enabling the RBC counters to
@@ -282,6 +320,7 @@ resume:
str r7, [r11, #MX6Q_SRC_GPR1]
str r7, [r11, #MX6Q_SRC_GPR2]
+ ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
mov r5, #0x1
resume_mmdc
i.MX6SL's suspend in ocram function is derived from i.MX6Q, it can lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V, measured on i.MX6SL EVK board, SH5. Signed-off-by: Anson Huang <b20788@freescale.com> --- Changes since V7: 1. Add __initconst to imx6sl_mmdc_io_offset[]; 2. Add last 3 MMDC IOs lpm settings back, they are missed by mistake in V7. arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-imx/pm-imx6q.c | 20 +++++++++++++++++- arch/arm/mach-imx/suspend-imx6.S | 43 ++++++++++++++++++++++++++++++++++++-- 3 files changed, 61 insertions(+), 4 deletions(-)