@@ -1,21 +1,62 @@
MOXA ART Ethernet Controller
+Integrated MDIO bus node:
+
+- compatible: "moxa,moxart-mdio"
+- Inherits from MDIO bus node binding[1]
+
+[1] Documentation/devicetree/bindings/net/phy.txt
+
+
+Ethernet node:
+
Required properties:
- compatible : Must be "moxa,moxart-mac"
- reg : Should contain register location and length
- interrupts : Should contain the mac interrupt number
+Optional Properties:
+
+- phy-handle : the phandle to a PHY node
+
+
Example:
- mac0: mac@90900000 {
+ mdio0: mdio@90900090 {
+ compatible = "moxa,moxart-mdio";
+ reg = <0x90900090 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+
+ mdio1: mdio@92000090 {
+ compatible = "moxa,moxart-mdio";
+ reg = <0x92000090 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+
+ mac0: ethernet@90900000 {
compatible = "moxa,moxart-mac";
- reg = <0x90900000 0x100>;
+ reg = <0x90900000 0x90>;
interrupts = <25 0>;
+ phy-handle = <ðphy0>;
};
- mac1: mac@92000000 {
+ mac1: ethernet@92000000 {
compatible = "moxa,moxart-mac";
- reg = <0x92000000 0x100>;
+ reg = <0x92000000 0x90>;
interrupts = <27 0>;
+ phy-handle = <ðphy1>;
};
@@ -25,6 +25,9 @@
#include <linux/of_irq.h>
#include <linux/crc32.h>
#include <linux/crc32c.h>
+#include <linux/phy.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
#include "moxart_ether.h"
@@ -60,6 +63,16 @@ static int moxart_set_mac_address(struct net_device *ndev, void *addr)
return 0;
}
+static int moxart_do_ioctl(struct net_device *ndev, struct ifreq *ir, int cmd)
+{
+ struct moxart_mac_priv_t *priv = netdev_priv(ndev);
+
+ if (!netif_running(ndev))
+ return -EINVAL;
+
+ return phy_mii_ioctl(priv->phy_dev, ir, cmd);
+}
+
static void moxart_mac_free_memory(struct net_device *ndev)
{
struct moxart_mac_priv_t *priv = netdev_priv(ndev);
@@ -109,6 +122,19 @@ static void moxart_mac_enable(struct net_device *ndev)
writel(priv->reg_maccr, priv->base + REG_MAC_CTRL);
}
+static void moxart_mac_update_duplex(struct net_device *ndev)
+{
+ struct moxart_mac_priv_t *priv = netdev_priv(ndev);
+
+ priv->reg_maccr &= ~(FULLDUP | ENRX_IN_HALFTX);
+ if (priv->duplex)
+ priv->reg_maccr |= FULLDUP;
+ else
+ priv->reg_maccr |= ENRX_IN_HALFTX;
+
+ writel(priv->reg_maccr, priv->base + REG_MAC_CTRL);
+}
+
static void moxart_mac_setup_desc_ring(struct net_device *ndev)
{
struct moxart_mac_priv_t *priv = netdev_priv(ndev);
@@ -168,6 +194,9 @@ static int moxart_mac_open(struct net_device *ndev)
moxart_update_mac_address(ndev);
moxart_mac_setup_desc_ring(ndev);
moxart_mac_enable(ndev);
+
+ phy_start(priv->phy_dev);
+
netif_start_queue(ndev);
netdev_dbg(ndev, "%s: IMR=0x%x, MACCR=0x%x\n",
@@ -183,6 +212,8 @@ static int moxart_mac_stop(struct net_device *ndev)
napi_disable(&priv->napi);
+ phy_stop(priv->phy_dev);
+
netif_stop_queue(ndev);
/* disable all interrupts */
@@ -435,12 +466,49 @@ static struct net_device_ops moxart_netdev_ops = {
.ndo_set_mac_address = moxart_set_mac_address,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
+ .ndo_do_ioctl = moxart_do_ioctl,
};
+static void moxart_adjust_link(struct net_device *ndev)
+{
+ struct moxart_mac_priv_t *priv = netdev_priv(ndev);
+ unsigned long flags;
+ int status_change = 0;
+
+ if (priv->phy_dev->link) {
+ if (priv->speed != priv->phy_dev->speed) {
+ priv->speed = priv->phy_dev->speed;
+ status_change = 1;
+ }
+
+ if (priv->duplex != priv->phy_dev->duplex) {
+ spin_lock_irqsave(&priv->txlock, flags);
+
+ priv->duplex = priv->phy_dev->duplex;
+ moxart_mac_update_duplex(ndev);
+
+ spin_unlock_irqrestore(&priv->txlock, flags);
+ status_change = 1;
+ }
+ }
+
+ if (priv->link != priv->phy_dev->link) {
+ if (!priv->phy_dev->link) {
+ priv->speed = 0;
+ priv->duplex = -1;
+ }
+ priv->link = priv->phy_dev->link;
+ status_change = 1;
+ }
+
+ if (status_change)
+ phy_print_status(priv->phy_dev);
+}
+
static int moxart_mac_probe(struct platform_device *pdev)
{
struct device *p_dev = &pdev->dev;
- struct device_node *node = p_dev->of_node;
+ struct device_node *node = p_dev->of_node, *phy_node;
struct net_device *ndev;
struct moxart_mac_priv_t *priv;
struct resource *res;
@@ -461,6 +529,28 @@ static int moxart_mac_probe(struct platform_device *pdev)
priv = netdev_priv(ndev);
priv->ndev = ndev;
+ priv->link = 0;
+ priv->speed = 0;
+ priv->duplex = -1;
+
+ phy_node = of_parse_phandle(node, "phy-handle", 0);
+ if (!phy_node) {
+ dev_err(p_dev, "of_parse_phandle failed\n");
+ ret = -ENODEV;
+ goto init_fail;
+ }
+
+ if (phy_node) {
+ priv->phy_dev = of_phy_connect(priv->ndev, phy_node,
+ &moxart_adjust_link,
+ 0, of_get_phy_mode(node));
+ if (!priv->phy_dev) {
+ dev_err(p_dev, "of_phy_connect failed\n");
+ ret = -ENODEV;
+ goto init_fail;
+ }
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ndev->base_addr = res->start;
priv->base = devm_ioremap_resource(p_dev, res);
@@ -297,6 +297,8 @@ struct moxart_mac_priv_t {
unsigned int reg_imr;
struct napi_struct napi;
struct net_device *ndev;
+ struct phy_device *phy_dev;
+ int speed, duplex, link;
dma_addr_t rx_base;
dma_addr_t rx_mapping[RX_DESC_NUM];
The kernel now has a MDIO bus driver and a phy_driver (RTL8201CP), connect to this PHY using OF. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> --- Notes: Thanks for reviewing, This time I'll avoid sending out the entire set, attaching it here directly to my reply. Because the DT example is directly imported from files in arch/arm/ those must be updated too. I'll submit those in a separate fixup patch. Changes since v3: 1. drop device_type property from DT example 2. replace "mac@" with "ethernet@" in DT example Applies to next-20140121 .../devicetree/bindings/net/moxa,moxart-mac.txt | 49 +++++++++++- drivers/net/ethernet/moxa/moxart_ether.c | 92 +++++++++++++++++++++- drivers/net/ethernet/moxa/moxart_ether.h | 2 + 3 files changed, 138 insertions(+), 5 deletions(-)