@@ -340,6 +340,7 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
int id = dai->id;
+ struct snd_soc_card *card = dai->card;
struct atmel_ssc_info *ssc_p = &ssc_info[id];
struct atmel_pcm_dma_params *dma_params;
int dir, channels, bits;
@@ -347,6 +348,9 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
int start_event;
int ret;
+ ssc_p->clk_from_rk_pin =
+ ((struct atmel_ssc_info *)(card->drvdata))->clk_from_rk_pin;
+
/*
* Currently, there is only one set of dma params for
* each direction. If more are added, this code will
@@ -466,7 +470,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
| SSC_BF(RCMR_START, start_event)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
- | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+ | SSC_BF(RCMR_CKS, ssc_p->clk_from_rk_pin ?
+ SSC_CKS_PIN : SSC_CKS_CLOCK);
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -481,7 +486,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
| SSC_BF(TCMR_START, start_event)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
- | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+ | SSC_BF(TCMR_CKS, ssc_p->clk_from_rk_pin ?
+ SSC_CKS_CLOCK : SSC_CKS_PIN);
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(TFMR_FSDEN, 0)
@@ -550,7 +556,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
| SSC_BF(RCMR_START, SSC_START_RISING_RF)
| SSC_BF(RCMR_CKI, SSC_CKI_RISING)
| SSC_BF(RCMR_CKO, SSC_CKO_NONE)
- | SSC_BF(RCMR_CKS, SSC_CKS_PIN);
+ | SSC_BF(RCMR_CKS, ssc_p->clk_from_rk_pin ?
+ SSC_CKS_PIN : SSC_CKS_CLOCK);
rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
@@ -565,7 +572,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
| SSC_BF(TCMR_START, SSC_START_RISING_RF)
| SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
| SSC_BF(TCMR_CKO, SSC_CKO_NONE)
- | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+ | SSC_BF(RCMR_CKS, ssc_p->clk_from_rk_pin ?
+ SSC_CKS_CLOCK : SSC_CKS_PIN);
tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
| SSC_BF(TFMR_FSDEN, 0)
@@ -113,6 +113,7 @@ struct atmel_ssc_info {
unsigned short cmr_div;
unsigned short tcmr_period;
unsigned short rcmr_period;
+ bool clk_from_rk_pin;
struct atmel_pcm_dma_params *dma_params[2];
struct atmel_ssc_state ssc_state;
};
When SSC works in slave mode, according to the hardware design, the clock can get from TK pin, also can get from RK pin. So, add one parameter to choose where the clock from. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- Changes in v2: None sound/soc/atmel/atmel_ssc_dai.c | 16 ++++++++++++---- sound/soc/atmel/atmel_ssc_dai.h | 1 + 2 files changed, 13 insertions(+), 4 deletions(-)