diff mbox

[V5,5/5] Documentation: power: reset: Add documentation for generic SYSCON reboot driver

Message ID 1391040198-14185-6-git-send-email-fkan@apm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Feng Kan Jan. 30, 2014, 12:03 a.m. UTC 
Add documentation for generic SYSCON reboot driver.

Signed-off-by: Feng Kan <fkan@apm.com>
---
 .../bindings/power/reset/syscon-reboot.txt         |   23 ++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
new file mode 100644
index 0000000..963f3c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
@@ -0,0 +1,23 @@ 
+Generic SYSCON mapped register reset driver
+
+This is a generic reset driver using syscon to map the reset register.
+The reset is generally performed with a write to the reset register
+defined by the register map pointed by syscon reference plus the offset
+with the mask defined in the reboot node.
+
+Required properties:
+- compatible: should contain "syscon-reboot"
+- regmap: this is phandle to the register map node 
+- offset: offset in the register map for the reboot register (in bytes)
+- mask: the reset value written to the reboot register (32 bit access)
+
+Default will be little endian mode, 32 bit access only.
+
+Examples:
+
+	reboot {
+	   compatible = "syscon-reboot";
+	   regmap = <&regmapnode>;
+	   offset = <0x0>;
+	   mask = <0x1>;
+	};