new file mode 100644
@@ -0,0 +1,145 @@
+/*
+ * EFI stub implementation that is shared by arm and arm64 architectures.
+ * This should be #included by the EFI stub implementation files.
+ *
+ * Copyright (C) 2013,2014 Linaro Limited
+ * Roy Franz <roy.franz@linaro.org
+ * Copyright (C) 2013 Red Hat, Inc.
+ * Mark Salter <msalter@redhat.com>
+ *
+ * This file is part of the Linux kernel, and is made available under the
+ * terms of the GNU General Public License version 2.
+ *
+ */
+
+/*
+ * This function handles the architcture specific differences between arm and
+ * arm64 regarding where the kernel image must be loaded and any memory that
+ * must be reserved. On failure it is required to free all
+ * all allocations it has made.
+ */
+static efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+ unsigned long *image_addr,
+ unsigned long *image_size,
+ unsigned long *reserve_addr,
+ unsigned long *reserve_size,
+ unsigned long dram_base,
+ efi_loaded_image_t *image);
+/*
+ * EFI entry point for the arm/arm64 EFI stubs. This is the entrypoint
+ * that is described in the PE/COFF header. Most of the code is the same
+ * for both archictectures, with the arch-specific code provided in the
+ * handle_kernel_image() function.
+ */
+unsigned long efi_entry(void *handle, efi_system_table_t *sys_table,
+ unsigned long *image_addr)
+{
+ efi_loaded_image_t *image;
+ efi_status_t status;
+ unsigned long image_size = 0;
+ unsigned long dram_base;
+ /* addr/point and size pairs for memory management*/
+ unsigned long initrd_addr;
+ u64 initrd_size = 0;
+ unsigned long fdt_addr; /* Original DTB */
+ u64 fdt_size = 0; /* We don't get size from configuration table */
+ char *cmdline_ptr = NULL;
+ int cmdline_size = 0;
+ unsigned long new_fdt_addr;
+ efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
+ unsigned long reserve_addr = 0;
+ unsigned long reserve_size = 0;
+
+ /* Check if we were booted by the EFI firmware */
+ if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+ goto fail;
+
+ pr_efi(sys_table, "Booting Linux Kernel...\n");
+
+ /*
+ * Get a handle to the loaded image protocol. This is used to get
+ * information about the running image, such as size and the command
+ * line.
+ */
+ status = efi_call_phys3(sys_table->boottime->handle_protocol,
+ handle, &loaded_image_proto, (void *)&image);
+ if (status != EFI_SUCCESS) {
+ pr_efi_err(sys_table, "Failed to get loaded image protocol\n");
+ goto fail;
+ }
+
+ dram_base = get_dram_base(sys_table);
+ if (dram_base == EFI_ERROR) {
+ pr_efi_err(sys_table, "Failed to find DRAM base\n");
+ goto fail;
+ }
+ status = handle_kernel_image(sys_table, image_addr, &image_size,
+ &reserve_addr,
+ &reserve_size,
+ dram_base, image);
+ if (status != EFI_SUCCESS) {
+ pr_efi_err(sys_table, "Failed to relocate kernel\n");
+ goto fail;
+ }
+
+ /*
+ * Get the command line from EFI, using the LOADED_IMAGE
+ * protocol. We are going to copy the command line into the
+ * device tree, so this can be allocated anywhere.
+ */
+ cmdline_ptr = efi_convert_cmdline_to_ascii(sys_table, image,
+ &cmdline_size);
+ if (!cmdline_ptr) {
+ pr_efi_err(sys_table, "getting command line via LOADED_IMAGE_PROTOCOL\n");
+ goto fail_free_image;
+ }
+
+ /* Load a device tree from the configuration table, if present. */
+ fdt_addr = (uintptr_t)get_fdt(sys_table);
+ if (!fdt_addr) {
+ status = handle_cmdline_files(sys_table, image, cmdline_ptr,
+ "dtb=",
+ ~0UL, (unsigned long *)&fdt_addr,
+ (unsigned long *)&fdt_size);
+
+ if (status != EFI_SUCCESS) {
+ pr_efi_err(sys_table, "Failed to load device tree!\n");
+ goto fail_free_cmdline;
+ }
+ }
+
+ status = handle_cmdline_files(sys_table, image, cmdline_ptr,
+ "initrd=", dram_base + SZ_512M,
+ (unsigned long *)&initrd_addr,
+ (unsigned long *)&initrd_size);
+ if (status != EFI_SUCCESS)
+ pr_efi_err(sys_table, "Failed initrd from command line!\n");
+
+ new_fdt_addr = fdt_addr;
+ status = allocate_new_fdt_and_exit_boot(sys_table, handle,
+ &new_fdt_addr, dram_base + MAX_FDT_OFFSET,
+ initrd_addr, initrd_size, cmdline_ptr,
+ fdt_addr, fdt_size);
+
+ /*
+ * If all went well, we need to return the FDT address to the
+ * calling function so it can be passed to kernel as part of
+ * the kernel boot protocol.
+ */
+ if (status == EFI_SUCCESS)
+ return new_fdt_addr;
+
+ pr_efi_err(sys_table, "Failed to update FDT and exit boot services\n");
+
+ efi_free(sys_table, initrd_size, initrd_addr);
+ efi_free(sys_table, fdt_size, fdt_addr);
+
+fail_free_cmdline:
+ efi_free(sys_table, cmdline_size, (unsigned long)cmdline_ptr);
+
+fail_free_image:
+ efi_free(sys_table, image_size, *image_addr);
+ efi_free(sys_table, reserve_size, reserve_addr);
+fail:
+ return EFI_ERROR;
+}
@@ -11,6 +11,7 @@
*/
static efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt,
+ unsigned long orig_fdt_size,
void *fdt, int new_fdt_size, char *cmdline_ptr,
u64 initrd_addr, u64 initrd_size,
efi_memory_desc_t *memory_map,
@@ -32,7 +33,27 @@ static efi_status_t update_fdt(efi_system_table_t *sys_table, void *orig_fdt,
"Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@"
LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n";
- status = fdt_open_into(orig_fdt, fdt, new_fdt_size);
+ /* Do some checks on provided FDT, if it exists*/
+ if (orig_fdt) {
+ if (fdt_check_header(orig_fdt)) {
+ pr_efi_err(sys_table, "Device Tree header not valid!\n");
+ return EFI_LOAD_ERROR;
+ }
+ /*
+ * We don't get the size of the FDT if we get if from a
+ * configuration table.
+ */
+ if (orig_fdt_size && fdt_totalsize(orig_fdt) > orig_fdt_size) {
+ pr_efi_err(sys_table, "Truncated device tree! foo!\n");
+ return EFI_LOAD_ERROR;
+ }
+ }
+
+ if (orig_fdt)
+ status = fdt_open_into(orig_fdt, fdt, new_fdt_size);
+ else
+ status = fdt_create_empty_tree(fdt, new_fdt_size);
+
if (status != 0)
goto fdt_set_fail;
@@ -180,10 +201,10 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
goto fail_free_new_fdt;
status = update_fdt(sys_table,
- (void *)fdt_addr, (void *)*new_fdt_addr,
- new_fdt_size, cmdline_ptr, initrd_addr,
- initrd_size, memory_map, map_size,
- desc_size, desc_ver);
+ (void *)fdt_addr, fdt_size,
+ (void *)*new_fdt_addr, new_fdt_size,
+ cmdline_ptr, initrd_addr, initrd_size,
+ memory_map, map_size, desc_size, desc_ver);
/* Succeeding the first time is the expected case. */
if (status == EFI_SUCCESS)