@@ -7,6 +7,7 @@ Required Properties:
Optional properties:
+- interrupts : Contains the IRQ for watchdog expiration
- timeout-sec : Contains the watchdog timeout in seconds
Example:
@@ -14,6 +15,7 @@ Example:
wdt@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
+ interrupts = <3>;
timeout-sec = <10>;
status = "okay";
};
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -109,10 +110,16 @@ static struct watchdog_device orion_wdt = {
.min_timeout = 1,
};
+static irqreturn_t orion_wdt_irq(int irq, void *devid)
+{
+ panic("Watchdog Timeout");
+ return IRQ_HANDLED;
+}
+
static int orion_wdt_probe(struct platform_device *pdev)
{
struct resource *res;
- int ret;
+ int ret, irq;
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
@@ -145,6 +152,21 @@ static int orion_wdt_probe(struct platform_device *pdev)
/* Let's make sure the watchdog is fully stopped */
orion_wdt_stop(&orion_wdt);
+ /* Request the IRQ only after the watchdog is disabled */
+ irq = platform_get_irq(pdev, 0);
+ if (irq > 0) {
+ /*
+ * Not all supported platforms specify an interrupt for the
+ * watchdog, so let's make it optional.
+ */
+ ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0,
+ pdev->name, &orion_wdt);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto disable_clk;
+ }
+ }
+
watchdog_set_nowayout(&orion_wdt, nowayout);
ret = watchdog_register_device(&orion_wdt);
if (ret)