@@ -49,8 +49,6 @@ config CPU_EXYNOS4210
select ARCH_HAS_BANDGAP
select ARM_CPU_SUSPEND if PM_SLEEP
select PINCTRL_EXYNOS
- select S5P_PM if PM_SLEEP
- select S5P_SLEEP if PM_SLEEP
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
@@ -61,8 +59,6 @@ config SOC_EXYNOS4212
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
- select S5P_PM if PM_SLEEP
- select S5P_SLEEP if PM_SLEEP
select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
@@ -84,8 +80,6 @@ config SOC_EXYNOS5250
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM_RUNTIME
- select S5P_PM if PM_SLEEP
- select S5P_SLEEP if PM_SLEEP
select S5P_DEV_MFC
select SAMSUNG_DMADEV
help
@@ -96,8 +90,6 @@ config SOC_EXYNOS5420
default y
depends on ARCH_EXYNOS5
select PM_GENERIC_DOMAINS if PM_RUNTIME
- select S5P_PM if PM_SLEEP
- select S5P_SLEEP if PM_SLEEP
help
Enable EXYNOS5420 SoC support
@@ -14,7 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_S5P_PM) += pm.o
+obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
@@ -27,12 +27,20 @@ void exynos_init_late(void);
void exynos_firmware_init(void);
+#ifdef CONFIG_PINCTRL_EXYNOS
+extern u32 exynos_get_eint_wake_mask(void);
+#else
+static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
+#endif
+
#ifdef CONFIG_PM_SLEEP
extern void __init exynos_pm_init(void);
#else
static inline void exynos_pm_init(void) {}
#endif
+extern void exynos_cpu_resume(void);
+
extern struct smp_operations exynos_smp_ops;
extern void exynos_cpu_die(unsigned int cpu);
deleted file mode 100644
@@ -1,75 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PM_CORE_H
-#define __ASM_ARCH_PM_CORE_H __FILE__
-
-#include <linux/of.h>
-#include <mach/map.h>
-
-#define S5P_EINT_WAKEUP_MASK (S5P_VA_PMU + 0x0604)
-#define S5P_WAKEUP_MASK (S5P_VA_PMU + 0x0608)
-
-#ifdef CONFIG_PINCTRL_EXYNOS
-extern u32 exynos_get_eint_wake_mask(void);
-#else
-static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
-#endif
-
-static inline void s3c_pm_debug_init_uart(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
- __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
- __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save)
-{
- /* nothing here yet */
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
- /* nothing here yet */
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
- /* nothing here yet */
-}
-
-/* Compatibility definitions to make plat-samsung/pm.c compile */
-#define IRQ_EINT_BIT(x) 1
-#define s3c_irqwake_intallow 0
-#define s3c_irqwake_eintallow 0
-
-#endif /* __ASM_ARCH_PM_CORE_H */
@@ -23,14 +23,14 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_scu.h>
+#include <asm/suspend.h>
#include <plat/cpu.h>
-#include <plat/pm.h>
+#include <plat/pm-common.h>
#include <plat/pll.h>
#include <plat/regs-srom.h>
#include <mach/map.h>
-#include <mach/pm-core.h>
#include "common.h"
#include "regs-pmu.h"
@@ -48,6 +48,7 @@ static struct sleep_save exynos_core_save[] = {
SAVE_ITEM(S5P_SROM_BC3),
};
+static u32 exynos_irqwake_intmask = 0xffffffff;
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
@@ -72,6 +73,10 @@ static void exynos_pm_prepare(void)
{
unsigned int tmp;
+ /* Set wake-up mask registers */
+ __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+ __raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (soc_is_exynos5250()) {
@@ -89,7 +94,7 @@ static void exynos_pm_prepare(void)
/* ensure at least INFORM0 has the resume address */
- __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
+ __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
}
static int exynos_pm_suspend(void)
@@ -187,14 +192,71 @@ static struct syscore_ops exynos_pm_syscore_ops = {
.resume = exynos_pm_resume,
};
-void __init exynos_pm_init(void)
+/*
+ * Suspend Ops
+ */
+
+static int exynos_suspend_enter(suspend_state_t state)
{
- u32 tmp;
+ int ret;
+
+ s3c_pm_debug_init();
+
+ S3C_PMDBG("%s: suspending the system...\n", __func__);
+
+ S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
+ exynos_irqwake_intmask, exynos_get_eint_wake_mask());
- pm_cpu_prep = exynos_pm_prepare;
- pm_cpu_sleep = exynos_cpu_suspend;
+ if (exynos_irqwake_intmask == -1U
+ && exynos_get_eint_wake_mask() == -1U) {
+ pr_err("%s: No wake-up sources!\n", __func__);
+ pr_err("%s: Aborting sleep\n", __func__);
+ return -EINVAL;
+ }
+
+ s3c_pm_save_uarts();
+ exynos_pm_prepare();
+ flush_cache_all();
+ s3c_pm_check_store();
+
+ ret = cpu_suspend(0, exynos_cpu_suspend);
+ if (ret)
+ return ret;
+
+ s3c_pm_restore_uarts();
- s3c_pm_init();
+ S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+ __raw_readl(S5P_WAKEUP_STAT));
+
+ s3c_pm_check_restore();
+
+ S3C_PMDBG("%s: resuming the system...\n", __func__);
+
+ return 0;
+}
+
+static int exynos_suspend_prepare(void)
+{
+ s3c_pm_check_prepare();
+
+ return 0;
+}
+
+static void exynos_suspend_finish(void)
+{
+ s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops exynos_suspend_ops = {
+ .enter = exynos_suspend_enter,
+ .prepare = exynos_suspend_prepare,
+ .finish = exynos_suspend_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+void __init exynos_pm_init(void)
+{
+ u32 tmp;
/* All wakeup disable */
tmp = __raw_readl(S5P_WAKEUP_MASK);
@@ -202,4 +264,5 @@ void __init exynos_pm_init(void)
__raw_writel(tmp, S5P_WAKEUP_MASK);
register_syscore_ops(&exynos_pm_syscore_ops);
+ suspend_set_ops(&exynos_suspend_ops);
}
@@ -31,6 +31,8 @@
#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4)
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
+#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
+#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
#define S5P_INFORM0 S5P_PMUREG(0x0800)
#define S5P_INFORM1 S5P_PMUREG(0x0804)
new file mode 100644
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Exynos low-level resume code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define CPU_MASK 0xff0ffff0
+#define CPU_CORTEX_A9 0x410fc090
+
+ /*
+ * The following code is located into the .data section. This is to
+ * allow l2x0_regs_phys to be accessed with a relative load while we
+ * can't rely on any MMU translation. We could have put l2x0_regs_phys
+ * in the .text section as well, but some setups might insist on it to
+ * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+ .data
+ .align
+
+ /*
+ * sleep magic, to allow the bootloader to check for an valid
+ * image to resume to. Must be the first word before the
+ * exynos_cpu_resume entry.
+ */
+
+ .word 0x2bedf00d
+
+ /*
+ * exynos_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ */
+
+ENTRY(exynos_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+ mrc p15, 0, r0, c0, c0, 0
+ ldr r1, =CPU_MASK
+ and r0, r0, r1
+ ldr r1, =CPU_CORTEX_A9
+ cmp r0, r1
+ bne skip_l2_resume
+ adr r0, l2x0_regs_phys
+ ldr r0, [r0]
+ cmp r0, #0
+ beq skip_l2_resume
+ ldr r1, [r0, #L2X0_R_PHY_BASE]
+ ldr r2, [r1, #L2X0_CTRL]
+ tst r2, #0x1
+ bne skip_l2_resume
+ ldr r2, [r0, #L2X0_R_AUX_CTRL]
+ str r2, [r1, #L2X0_AUX_CTRL]
+ ldr r2, [r0, #L2X0_R_TAG_LATENCY]
+ str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+ ldr r2, [r0, #L2X0_R_DATA_LATENCY]
+ str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+ ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
+ str r2, [r1, #L2X0_PREFETCH_CTRL]
+ ldr r2, [r0, #L2X0_R_PWR_CTRL]
+ str r2, [r1, #L2X0_POWER_CTRL]
+ mov r2, #1
+ str r2, [r1, #L2X0_CTRL]
+skip_l2_resume:
+#endif
+ b cpu_resume
+ENDPROC(exynos_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+ .globl l2x0_regs_phys
+l2x0_regs_phys:
+ .long 0
+#endif
@@ -23,18 +23,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-#define CPU_MASK 0xff0ffff0
-#define CPU_CORTEX_A9 0x410fc090
-
-/*
- * The following code is located into the .data section. This is to
- * allow l2x0_regs_phys to be accessed with a relative load while we
- * can't rely on any MMU translation. We could have put l2x0_regs_phys
- * in the .text section as well, but some setups might insist on it to
- * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
- */
.data
.align
@@ -53,39 +42,5 @@
*/
ENTRY(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
- mrc p15, 0, r0, c0, c0, 0
- ldr r1, =CPU_MASK
- and r0, r0, r1
- ldr r1, =CPU_CORTEX_A9
- cmp r0, r1
- bne skip_l2_resume
- adr r0, l2x0_regs_phys
- ldr r0, [r0]
- cmp r0, #0
- beq skip_l2_resume
- ldr r1, [r0, #L2X0_R_PHY_BASE]
- ldr r2, [r1, #L2X0_CTRL]
- tst r2, #0x1
- bne skip_l2_resume
- ldr r2, [r0, #L2X0_R_AUX_CTRL]
- str r2, [r1, #L2X0_AUX_CTRL]
- ldr r2, [r0, #L2X0_R_TAG_LATENCY]
- str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
- ldr r2, [r0, #L2X0_R_DATA_LATENCY]
- str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
- ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
- str r2, [r1, #L2X0_PREFETCH_CTRL]
- ldr r2, [r0, #L2X0_R_PWR_CTRL]
- str r2, [r1, #L2X0_POWER_CTRL]
- mov r2, #1
- str r2, [r1, #L2X0_CTRL]
-skip_l2_resume:
-#endif
b cpu_resume
ENDPROC(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
- .globl l2x0_regs_phys
-l2x0_regs_phys:
- .long 0
-#endif