deleted file mode 100644
@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-mvebu/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/kirkwood.h>
-
-#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0100)
-#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
-#define CPU_CONFIG_ERROR_PROP 0x00000004
-
-#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104)
-#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
-#define CPU_RESET 0x00000002
-
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
-#define SOFT_RESET 0x00000001
-
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE + 0x0110)
-
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300)
-#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300)
-
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE + 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE + 0x11c)
-#define CGC_BIT_GE0 (0)
-#define CGC_BIT_PEX0 (2)
-#define CGC_BIT_USB0 (3)
-#define CGC_BIT_SDIO (4)
-#define CGC_BIT_TSU (5)
-#define CGC_BIT_DUNIT (6)
-#define CGC_BIT_RUNIT (7)
-#define CGC_BIT_XOR0 (8)
-#define CGC_BIT_AUDIO (9)
-#define CGC_BIT_SATA0 (14)
-#define CGC_BIT_SATA1 (15)
-#define CGC_BIT_XOR1 (16)
-#define CGC_BIT_CRYPTO (17)
-#define CGC_BIT_PEX1 (18)
-#define CGC_BIT_GE1 (19)
-#define CGC_BIT_TDM (20)
-#define CGC_GE0 (1 << 0)
-#define CGC_PEX0 (1 << 2)
-#define CGC_USB0 (1 << 3)
-#define CGC_SDIO (1 << 4)
-#define CGC_TSU (1 << 5)
-#define CGC_DUNIT (1 << 6)
-#define CGC_RUNIT (1 << 7)
-#define CGC_XOR0 (1 << 8)
-#define CGC_AUDIO (1 << 9)
-#define CGC_POWERSAVE (1 << 11)
-#define CGC_SATA0 (1 << 14)
-#define CGC_SATA1 (1 << 15)
-#define CGC_XOR1 (1 << 16)
-#define CGC_CRYPTO (1 << 17)
-#define CGC_PEX1 (1 << 18)
-#define CGC_GE1 (1 << 19)
-#define CGC_TDM (1 << 20)
-#define CGC_RESERVED (0x6 << 21)
-
-#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
-#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x118)
-
-#endif
deleted file mode 100644
@@ -1,142 +0,0 @@
-/*
- * arch/arm/mach-mvebu/include/mach/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000 PCIe #0 Memory space
- * e8000000 PCIe #1 Memory space
- * f1000000 on-chip peripheral registers
- * f2000000 PCIe #0 I/O space
- * f3000000 PCIe #1 I/O space
- * f4000000 NAND controller address window
- * f5000000 Security Accelerator SRAM
- *
- * virt phys size
- * fed00000 f1000000 1M on-chip peripheral registers
- * fee00000 f2000000 1M PCIe #0 I/O space
- * fef00000 f3000000 1M PCIe #1 I/O space
- */
-
-#define KIRKWOOD_SRAM_PHYS_BASE 0xf5000000
-#define KIRKWOOD_SRAM_SIZE SZ_2K
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf4000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
-
-#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00010000
-#define KIRKWOOD_PCIE1_IO_SIZE SZ_64K
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE SZ_64K
-
-#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
-#define KIRKWOOD_REGS_SIZE SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-
-#define KIRKWOOD_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_BUS_BASE 0xe8000000
-#define KIRKWOOD_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
-#define DDR_WINDOW_CPU_SZ (0x20)
-#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
-
-#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
-#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
-#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030)
-#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034)
-#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100)
-#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140)
-#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300)
-#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600)
-#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100)
-
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
-#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
-#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
-#define BRIDGE_WINS_SZ (0x80)
-
-#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
-
-#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000)
-#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70)
-#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04)
-#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000)
-#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70)
-#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04)
-
-#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000)
-
-#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800)
-#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800)
-#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900)
-#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900)
-#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00)
-#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00)
-#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00)
-#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00)
-
-#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000)
-#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000)
-
-#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000)
-#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000)
-#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050)
-#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330)
-#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050)
-#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330)
-
-#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000)
-
-#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000)
-#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-#define MV88F6281_REV_A1 3
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-#define MV88F6192_REV_A1 3
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-#define MV88F6180_REV_A1 3
-
-#define MV88F6282_DEV_ID 0x6282
-#define MV88F6282_REV_A0 0
-#define MV88F6282_REV_A1 1
-#endif
@@ -17,7 +17,7 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/bridge-regs.h>
+#include "kirkwood.h"
static void __iomem *ddr_operation_base;
static void __iomem *memory_pm_ctrl;
@@ -13,19 +13,16 @@
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqchip.h>
-#include <linux/kexec.h>
+#include <linux/slab.h>
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/bridge-regs.h>
-#include <plat/common.h>
-#include <plat/pcie.h>
+#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
new file mode 100644
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mvebu/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
+
+#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
+#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104)
+#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118)
kirkwood is very nearly fully DT. Remove most of the address definitions from the header files and make it a local header file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> v2 Squash in the patch which removed unneeded includes. --- arch/arm/mach-mvebu/include/mach/bridge-regs.h | 85 --------------- arch/arm/mach-mvebu/include/mach/kirkwood.h | 142 ------------------------- arch/arm/mach-mvebu/kirkwood-pm.c | 2 +- arch/arm/mach-mvebu/kirkwood.c | 9 +- arch/arm/mach-mvebu/kirkwood.h | 22 ++++ 5 files changed, 26 insertions(+), 234 deletions(-) delete mode 100644 arch/arm/mach-mvebu/include/mach/bridge-regs.h delete mode 100644 arch/arm/mach-mvebu/include/mach/kirkwood.h create mode 100644 arch/arm/mach-mvebu/kirkwood.h